My Orders
Electrolux Washer Valves
GET YOUR OFFICIAL Electrolux PARTS TO ENSURE VICTORY
Popular Electrolux Washer Valves
This OEM water inlet valve assembly with flow meter fits select Frigidaire, Electrolux, White Westinghouse, and Tappan washers. It regulates water flow for efficient operation and energy savings. Unplug the washer and shut off the water supply before installing. Refer to your owner’s manual for model-specific guidance. Verify compatibility before ordering.
This OEM water inlet valve assembly with flow meter fits select Frigidaire, Electrolux, White Westinghouse, and Tappan washers. It regulates water flow for efficient operation and energy savings. Unplug the washer and shut off the water supply before installing. Refer to your owner’s manual for model-specific guidance. Verify compatibility before ordering.
The water inlet and dispenser valve is used in washing machines. The function of this part is to control and monitor the amount of water flow into the washer. If there is leaking during use, your machine will not fill with water, or there is no hot or cold water entering the washer, it is important to replace the water valve to solve the problem. For this repair, you will need a Phillips head screwdriver and a flathead screwdriver. For installation instructions, refer to the manual provided by the manufacturer. Remember to unplug your appliance from the power source before beginning this repair.
The water inlet and dispenser valve is used in washing machines. The function of this part is to control and monitor the amount of water flow into the washer. If there is leaking during use, your machine will not fill with water, or there is no hot or cold water entering the washer, it is important to replace the water valve to solve the problem. For this repair, you will need a Phillips head screwdriver and a flathead screwdriver. For installation instructions, refer to the manual provided by the manufacturer. Remember to unplug your appliance from the power source before beginning this repair.
Installation Instructions
Julie from Lancaster, OH
Valve dispener would spray water all over inside of washer.
My husband made the repair. First, he had to remove the dryer off of the top of the washer since it's a stacking unit. Disconnect water lines. Next he removed two screws from the back of the washer that allows you to remove the lid. Now unsnap a trim piece that is on the back surrounding the water connections and an exhaust port. Rea
... Read more
ch inside the washer, turn the exhaust port unlocking it and pushing out the back of the washer as far as you can to get it out of the way. Disconnect the electrical lines from the valve dispenser. Remove the two screws that fasten the valve dispenser to the washer. Install the new dispenser and reassemble.
Read less
This water inlet valve works with washers
This water inlet valve works with washers
This electronically controlled dispenser valve assembly regulates the flow of water into the detergent, bleach, and fabric softener compartments of the washer. Activated by the control board, it delivers the correct water temperature and volume based on the selected wash cycle, ensuring effective distribution of cleaning agents. A malfunctioning valve can lead to issues such as the washer failing to fill, incorrect water levels, restricted flow, or visible leaks near the valve area. Replacing a faulty valve restores proper cycle performance and helps maintain optimal washing results. Always disconnect power and water supply before installation.
This electronically controlled dispenser valve assembly regulates the flow of water into the detergent, bleach, and fabric softener compartments of the washer. Activated by the control board, it delivers the correct water temperature and volume based on the selected wash cycle, ensuring effective distribution of cleaning agents. A malfunctioning valve can lead to issues such as the washer failing to fill, incorrect water levels, restricted flow, or visible leaks near the valve area. Replacing a faulty valve restores proper cycle performance and helps maintain optimal washing results. Always disconnect power and water supply before installation.
Electrolux Washer Dispenser Housing And Water Inlet Valve Assembly
Part #5304512102
$135.25
In Stock
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Installation Instructions
D from Baytown, TX
water continually leaking into tub when not in use
Repair was harder than originally anticipated. Front had to be taken off, but trying to get all panels back in place was quite a job
This 3-way water inlet valve controls the flow of hot and cold water into the washing machine, ensuring the correct temperature and water levels for each cycle. Designed with multiple solenoids for reliable regulation, it supports consistent wash performance. Replacing a faulty valve can resolve issues such as slow filling, incorrect water temperature, or leaks, helping restore proper operation.
This 3-way water inlet valve controls the flow of hot and cold water into the washing machine, ensuring the correct temperature and water levels for each cycle. Designed with multiple solenoids for reliable regulation, it supports consistent wash performance. Replacing a faulty valve can resolve issues such as slow filling, incorrect water temperature, or leaks, helping restore proper operation.
This valve manages the controlled delivery of water or gas required for appliance operation. By ensuring proper flow and shutoff, it supports both performance and safety and is replaced when leaks, blockages, or flow irregularities develop.
This valve manages the controlled delivery of water or gas required for appliance operation. By ensuring proper flow and shutoff, it supports both performance and safety and is replaced when leaks, blockages, or flow irregularities develop.
Are you looking to boost the performance of your GE dryer? Our high-quality, original Top Panel Cover could be just what you need! This sturdy piece sits atop your dryer cabinet, working like a shield to protect the inner workings of your dryer from pesky dust and other potential damage. This not only prolongs the life of your dryer but also keeps it working efficiently, just like new! Installation? It's straightforward enough to do yourself. One key thing to note though - always unplug your dryer before you get started, for your own safety. And it's a good idea to pop on a pair of work gloves to safeguard your hands during the installation process. A small step that goes a long way in taking care of your trusty GE dryer - that?s our original Top Panel Cover for you. Give your dryer the care it deserves today.
Are you looking to boost the performance of your GE dryer? Our high-quality, original Top Panel Cover could be just what you need! This sturdy piece sits atop your dryer cabinet, working like a shield to protect the inner workings of your dryer from pesky dust and other potential damage. This not only prolongs the life of your dryer but also keeps it working efficiently, just like new! Installation? It's straightforward enough to do yourself. One key thing to note though - always unplug your dryer before you get started, for your own safety. And it's a good idea to pop on a pair of work gloves to safeguard your hands during the installation process. A small step that goes a long way in taking care of your trusty GE dryer - that?s our original Top Panel Cover for you. Give your dryer the care it deserves today.
These valves are where the water supply from the house attach to the washing machine. You connect the hoses to the valve with fill hoses. The fill hoses should have screens installed in them to prevent debris from entering the valve and causing it to stick open or closed. Sometimes these valves are called mixing valves, because they essentially mix the cold and hot water together to create “warm” water. Another common term is water solenoid.
These valves are where the water supply from the house attach to the washing machine. You connect the hoses to the valve with fill hoses. The fill hoses should have screens installed in them to prevent debris from entering the valve and causing it to stick open or closed. Sometimes these valves are called mixing valves, because they essentially mix the cold and hot water together to create “warm” water. Another common term is water solenoid.