Crosley Dryer Knobs
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Crosley Dryer Knobs
Your Price
$46.38
In Stock
Crosley Dryer Rotary Knob
We have a Frigidaire Gallery dryer, gas, front loading stacked in top of the washer, which is about 7 or 8 years old.
Turns out the top felt seal was worn out, allowing clothes to get stuck between the drum and the door where they would get the rust colored stain. I think this is fairly common. It also "ate" zippers and buttons.
To open the dryer up, you first want to remove 2 screws at the bottom of the front panel, they are covered by little plastic plugs that pop out. Then, go in through the top- you have to pop the lid up from the front, and it swings up like a car hood. from the top, you have to reach in and undo a screw on each side that holds the front panel to the body of the dryer. it's a little tricky.
After those four screws are removed, the front panel is held on by pressure clips, which you can reach from the top and squeeze so they 'let go'. As those release, the front panel will fall outward with the bottom still attached- there are two small pieces of metal at the bottom that the panel sits in. So you lift the panel straight up to get them off those two guides/hooks, and it's clear.
Next you'll want to shop vac the heck out the whole dryer interior. Mine was caked with dust and lint.
Step two is felt replacement. you have to use some muscle to tear the felt off the top of the door opening, which will leave a bunch of ripped felt stuck to the high temp glue. That's where the wire brush and the Goof Off come in. That stuff worked like a charm to remove every last bit of felt and glue.
Once clean and dry, apply the glue that came with the felt guide, set the felt in place (with those plastic pieces facing up), and hold in place for a while. I used plastic clamps to hold the felt in place for about 30 minutes while the glue set.
For good measure, i also replaced the dryer belt and the plastic ball joint that the drum sits in, but i don't think that was necessary. The belt may be a good idea, and to do that you remove the belt by popping it off the little plastic wheel under the drum first, then it'll be loose and you can remove the belt and put a new one on. (This is also a little tricky, take it one step at a time.)
Then put it back together in reverse order and you'll be done with those rust marks.
(Mine is working great) Read more...
PartSelect Number PS419092
Manufacturer Part Number 131965300
This knob accepts a D-shaped shaft. Sold individually.
Installation Instructions
Randy from Anchorage, AK
Burn/rust marks on clothes
Like many others, i was suffering the problem of rust marks on clothes, which ruins them for good. We have a Frigidaire Gallery dryer, gas, front loading stacked in top of the washer, which is about 7 or 8 years old.
Turns out the top felt seal was worn out, allowing clothes to get stuck between the drum and the door where they would get the rust colored stain. I think this is fairly common. It also "ate" zippers and buttons.
To open the dryer up, you first want to remove 2 screws at the bottom of the front panel, they are covered by little plastic plugs that pop out. Then, go in through the top- you have to pop the lid up from the front, and it swings up like a car hood. from the top, you have to reach in and undo a screw on each side that holds the front panel to the body of the dryer. it's a little tricky.
After those four screws are removed, the front panel is held on by pressure clips, which you can reach from the top and squeeze so they 'let go'. As those release, the front panel will fall outward with the bottom still attached- there are two small pieces of metal at the bottom that the panel sits in. So you lift the panel straight up to get them off those two guides/hooks, and it's clear.
Next you'll want to shop vac the heck out the whole dryer interior. Mine was caked with dust and lint.
Step two is felt replacement. you have to use some muscle to tear the felt off the top of the door opening, which will leave a bunch of ripped felt stuck to the high temp glue. That's where the wire brush and the Goof Off come in. That stuff worked like a charm to remove every last bit of felt and glue.
Once clean and dry, apply the glue that came with the felt guide, set the felt in place (with those plastic pieces facing up), and hold in place for a while. I used plastic clamps to hold the felt in place for about 30 minutes while the glue set.
For good measure, i also replaced the dryer belt and the plastic ball joint that the drum sits in, but i don't think that was necessary. The belt may be a good idea, and to do that you remove the belt by popping it off the little plastic wheel under the drum first, then it'll be loose and you can remove the belt and put a new one on. (This is also a little tricky, take it one step at a time.)
Then put it back together in reverse order and you'll be done with those rust marks.
(Mine is working great) Read more...
Your Price
$32.12
In Stock
Crosley Dryer Timer Dial Skirt
PartSelect Number PS11741055
Manufacturer Part Number WP33001621
This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.
Fixes these symptoms
- Timer Not Working
- Touchpad does not respond
- See more...
Installation Instructions
Alexander from Lakeland, FL
Broken Dryer Knob
First let me just say that Partselect.com is now one my stored favorites in my web browser. I came home from a business trip and saw a pair of pliers on the dryer. I thought that was odd until my wife informed me that the knob on the dryer had broken. So she was using the pliers to select the cycle. Somehow she knew where the missing pointer was actually pointing. Since the dryer was over 5 years old I saw this as an opportunity to upgrade both appliances. Not with my frugal wife. A search of the Internet popped up partselect. I ordered Wednesday morning and the parts where on my doorstep late Thursday. Trust me I was very surprised. Everything worked perfectly. Two thumbs up!!!
Read more...
Your Price
$11.10
In Stock
Crosley Dryer D-Shaped Knob Insert
Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicates the selector is lined up correctly, but it isn't, the problem is the selector, not the knob. Read more...
PartSelect Number PS11746209
Manufacturer Part Number WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
Installation Instructions
Larry from HICKORY, NC
The main knob insert snapped.
Nothing to it. Just remember to put the insert in the knob, NOT on the selector stem. Line up the flat part of the insert with the flat part of the stem and push the knob in place. Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicates the selector is lined up correctly, but it isn't, the problem is the selector, not the knob. Read more...
Your Price
$59.04
In Stock
Crosley Dryer Timer Knob
PartSelect Number PS418921
Manufacturer Part Number 131873500
This knob accepts a D-shaped shaft.
Installation Instructions
Robert from McMinnville, OR
Hub inside knob cracked
What the pictures do not show is the inner clamp spring that grips the selector switch shaft so it will not easily fall off. It is not shown or mentioned but in fact was installed in the knob.
Read more...
Your Price
$11.10
In Stock
Crosley Dryer Control Knob
PartSelect Number PS11757250
Manufacturer Part Number WPW10711289
This control knob is for dryers.
Control knob lets you control cycle settings.
Remove the knob by pulling it straight off its post.
Installation Instructions
JEFFREY from MODESTO, CA
The broke of the knob and had to replace the whole mother board and the knob
I had to remove the whole top of the washer and unplugged all the wire to the board. Getting the board out was the hardest thing to do because no screws it was clamped in place. Once I figured how to unclamped the thing without breaking it, it was relatively simple and to only 15 min to button it back up.
Read more...
Your Price
$47.15
In Stock
Crosley Dryer Timer Knob
PartSelect Number PS419211
Manufacturer Part Number 134011703
This knob accepts a D-shaped shaft.
Installation Instructions
Cheri from Cary, NC
Original timer knob broke
I looked in my appliance paperwork, found the model number, keyed it in, located and ordered the knob. It arrived in a few days and voila, pushed new knob on and dryer is back in great working order. Thanks!
Read more...
Your Price
$23.31
In Stock
Crosley Dryer Timer Knob Base
PartSelect Number PS11739297
Manufacturer Part Number WP22001659
This timer knob is not quite three inches in diameter. It is all gray in color and it is made entirely of plastic. This has a D-Shaped Shaft.
Installation Instructions
Susan from Hollywood, FL
The Plastic Knob Broke And Wouldn't Grip The Steel Movement
All I did was put the three pieces together (1-2-3! So easy) and attached to the metal piece of the dryer. Now I can set the dryer to any temperature and time I need!
Read more...
Your Price
$44.24
In Stock
Your Price
$11.10
In Stock
Crosley Dryer Timer Knob Insert Cap
PartSelect Number PS11739300
Manufacturer Part Number WP22001664
This timer knob insert cap is just over two inches in diameter. It is all white in color and is made of plastic.
Installation Instructions
Susan from Hollywood, FL
The Plastic Knob Broke And Wouldn't Grip The Steel Movement
All I did was put the three pieces together (1-2-3! So easy) and attached to the metal piece of the dryer. Now I can set the dryer to any temperature and time I need!
Read more...
Your Price
$55.60
In Stock
Crosley Dryer Timer Knob with Skirt
PartSelect Number PS11741923
Manufacturer Part Number WP37001184
This white timer knob and skirt assembly is used with for some clothes washers and clothes dryers. The entire assembly is three inches in diameter, and it is made of plastic. There is a gray trim around the perimeter of the knob as well as a gray indicator line on the knob's skirt. This knob accepts a D-shaped shaft.
Installation Instructions
mary from Prescott, MI
could noy start the dryer because the knob would not push in
the old knob slid off the post. The knob and post had one flat spot so it would be impossible to install the knob in the wrong position. Just pushed the new knob on the post and the dryer works like new again.
Read more...
Related Crosley Dryer Parts
- All Crosley Dryer parts
- Crosley Dryer Belts
- Crosley Dryer Brackets and Flanges
- Crosley Dryer Caps and Lids
- Crosley Dryer Circuit Boards and Touch Pads
- Crosley Dryer Doors
- Crosley Dryer Drums and Tubs
- Crosley Dryer Ducts and Vents
- Crosley Dryer Elements and Burners
- Crosley Dryer Filters
- Crosley Dryer Fuses
- Crosley Dryer Handles
- Crosley Dryer Hardware
- Crosley Dryer Hinges
- Crosley Dryer Latches
- Crosley Dryer Panels
- Crosley Dryer Pulleys
- Crosley Dryer Seals and Gaskets
- Crosley Dryer Sensors
- Crosley Dryer Springs and Shock Absorbers
- Crosley Dryer Switches
- Crosley Dryer Thermostats
- Crosley Dryer Valves
- Crosley Dryer Wheels and Rollers
- Crosley Dryer Wire Plugs and Connectors
