Crosley Dryer Filters

Crosley Appliance Parts
Shop By Part Type

Popular Crosley Dryer Filters

Your Price
$46.12
  On Order
Dryer Lint Screen Filter
★★★★★
★★★★★
(117)
PartSelect Number PS11757278
Manufacturer Part Number WPW10717210
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
Installation Instructions
Daniel from Wichita, KS
Door catch broken; lint filter handle had come off
Removed some screws and partially dismantled the door so I could get the old catch out. Inserted the new catch, and put the screws back in. Saved me an $80+ service call.
On the filter, I had to use pliers to remove the old one because the handle had broken off. Did that, and inserted the new one. Done. Sears had been unable to supply me with a new filter.
Read more...
Your Price
$46.23
  In Stock
Lint Filter
★★★★★
★★★★★
(74)
PartSelect Number PS1491676
Manufacturer Part Number W10120998
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint filter, check the filter slot for a buildup of lint, which can be a fire hazard. Continue to check often to make sure the filter and slot are both cleared of lint.
Fixes these symptoms
  • Marks left on clothes
  • No heat or not enough heat
  • Shuts off too soon
  • See more...
Installation Instructions
JEFFREY from FALL RIVER, MA
felt strip came off lint screen
ordered new lint screen, removed old screen, inserted new screen. Read more...
Your Price
$45.68
  On Order
Dryer Lint Filter and Cover
★★★★★
★★★★★
(27)
PartSelect Number PS11726200
Manufacturer Part Number W10828351
Cover and filter as an assembly. It is used in dryer, If the lint filter cover is damaged or cracked, it should be replaced.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
Installation Instructions
Kevin from Seattle, WA
lint filter screen was broken
replace lint filter with new part. Great service and quick delivery! Thanks! Read more...
Your Price
$31.18
  In Stock
Lint Filter
★★★★★
★★★★★
(39)
PartSelect Number PS11722097
Manufacturer Part Number 339392V
This filter collects lint as it passes through the dryer vent.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
Installation Instructions
Diane from Rancho Cucamonga, CA
Needed new Lint Filter for Dryer
Went to 3 big appliances stores - Not one carried any type of Lint Filter for Dryer. Went on line & typed in Lint Filter for Dryer in search bar. Part Select came up. Went thru site to ordering - Part Select made so easy to order. You just type in your Manufacture name & they instruct you step by step how to find model number & type of filter you need. So Easy. Very economical. I ordered & within 4 days I had my filter. I used 7-14 day delivery & was so pleased I had my filter within 4 days. Parts Select sent me email verifying my order as well as email when the part shipped.
Wonderful Customer Service. I will definitely use Part Select for any need part on any appliance.
Easy - Economical & One Stop Shopping. Love it
Read more...
Your Price
$46.92
  On Order
Lint Filter
★★★★★
★★★★★
(47)
PartSelect Number PS11741777
Manufacturer Part Number WP349639
This dryer lint screen comes with a handle. This filter collects lint as it passes through the dryer vent.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
Installation Instructions
gregg from castaic, CA
worn out lint filter
The new lint filter fits perfectly,however because the handle is much larger than the original it does not allow the filter to close completely...causing a small amount of lint to acummulate on the dryer top. Read more...
Your Price
$44.65
  In Stock
Lint Filter
★★★★★
★★★★★
(48)
PartSelect Number PS11741075
Manufacturer Part Number WP33001808
This is a replacement lint filter for your dryer. The lint filter is approximately 12 1/2 inches in length. Simply remove the existing filter and replace it with the new one. Check for an excess buildup of lint when changing the filter, and clean it after every use.
Fixes these symptoms
  • No heat or not enough heat
  • Noisy
  • Takes too long to dry
  • See more...
Installation Instructions
Anthony from DeKalb, IL
Lint into venting area.
Removal of old lint collector and replace with new one. Read more...
Your Price
$18.48
  In Stock
Lint Filter
★★★★★
★★★★★
(8)
PartSelect Number PS417841
Manufacturer Part Number 131450300
Located at the front of the dryer, this lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 12 inches long x 7 inches high, has a plastic frame, and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup of lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. If the filter is damaged or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.
Fixes these symptoms
  • Marks left on clothes
  • Takes too long to dry
  • See more...
Installation Instructions
Jeff from Bethalto, IL
lint filter did not fit "squarely" into its place
replaced old filter, only to find that the new one had the same issue. After closer examination, I determined the filter guide that screws into place, which I had removed earlier to clean lint out, did not hold the lint casing correctly. I removed and reinstalled the piece that has the metal moisture sensors, and replaced it, ensure both screws held the lint casing as it should. Now I have two lint filters that fit perfectly! So, if you ever remove the piece wtih the metal sensors, make sure that the lint casing is screwed in correctly when replacing. Read more...
Your Price
$52.85
  In Stock
Lint Filter
★★★★★
★★★★★
(18)
PartSelect Number PS11741919
Manufacturer Part Number WP37001142
Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.
Fixes these symptoms
  • Door won’t close
  • Marks left on clothes
  • No heat or not enough heat
  • See more...
Installation Instructions
Tim from South Glens Falls, NY
The Felt Gasket between drum and door ripped, vent manifold from Dryer to fan and lint screen broken
I pulled the bottom panel and the door panel to replace the manifold and felt gasket around the drum. I removed old gasket very easily, it peeled right off. I use brake cleaning fluid (Spray Can from Auto Zone about $1.45) to remove old glue. Used spray contact cement (Elmer's about 4.50 at Ace) and sprayed the panel and gasket surfaces and let dry. I then applied a 2nd coat and let get "tacky" and installed the gasket. You will need an extra set of hands to hold the gasket in place while you stretch it over the the panel. The vent manifold is held in place with 3 phillips screws and was installed in about 10 minutes. The only gripe I had was in the Parts-Select illustrated breakdown they don't tell you the lint screen comes with the manifold assembly, so I bought one of them too. Now have an extra lint screen Read more...
Your Price
$47.10
  On Order
Lint Filter - White
★★★★★
★★★★★
(4)
PartSelect Number PS2363394
Manufacturer Part Number 134701410
Fixes these symptoms
Your Price
$64.49
  On Order
Lint Filter
★★★★★
★★★★★
(13)
PartSelect Number PS11738127
Manufacturer Part Number W10874409
This lint filter screen has a white handle. This filter collects lint as it passes through the dryer vent.
Fixes these symptoms
Installation Instructions
Katharine from Palm Springs, CA
The lint filter was seriously damaged
After the new filter arrived, I took the old filter out, put the newe one in. No tools, no difficulty at all. Actually, the really difficult part of this entire episode was finding the model number on the dryer. It was on the underside of the door. Read more...

Related Parts