Amana Dishwasher Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Amana Dishwasher Switches
Your Price
$47.40
In Stock
Amana Dishwasher Overfill Control Switch
PartSelect Number PS11750031
Manufacturer Part Number WPW10195039
This part is also known as a float switch. This float switch, when activated, stops the flow of water into the dishwasher.
Fixes these symptoms
- Leaking
- Not cleaning dishes properly
- Not draining
- See more...
Installation Instructions
Dennis from AUBURNDALE, WI
water fill overflows at times
thought it could be due to the overfill control switch,so ordered one and replaced one in the washer. However, it did not solve the problem. Having a repair company coming to look at the dishwasher. Tipped the washer on its back and switch was readily accessable. Only had to open plastic covering over the switch, disconnect the wires and install new switch and reconnect the wires.
Read more...
Your Price
$31.58
In Stock
Amana Dishwasher Door Switch
first stop, the TCO, the thermal cutoff, it's like an inline fuse. I got 120 volts going in and nothing coming out. Did an ohm check and it was open.
Found it locally and replaced it. Now I've power to the control panel but the washer still doesn't work
because the micro switch in the handle is broken and that turns out to be the original problem...
the stupid plastic handle broke the micro-switch which shorted the TCO... Read more...
PartSelect Number PS11745501
Manufacturer Part Number WP8269209
This dishwasher door switch will shut your dishwasher off when the door is opened.
Fixes these symptoms
- Door latch failure
- Will Not Start
- See more...
Installation Instructions
mike from lockport, NY
dishwasher quit halfway thru a wash cycle
first I noticed that the dishwasher wasn't making any noise. Then I saw that there were no lights on the control panel. I opened the door and found water dripping off everything... I closed the door and tried hitting every button I could see, nothing happened. I checked the breaker, it was ok, and since I did all the wiring myself, I knew that was ok too. So I pulled off the upper panel of the front door and got out the electrical schematic that came with the washer. first stop, the TCO, the thermal cutoff, it's like an inline fuse. I got 120 volts going in and nothing coming out. Did an ohm check and it was open.
Found it locally and replaced it. Now I've power to the control panel but the washer still doesn't work
because the micro switch in the handle is broken and that turns out to be the original problem...
the stupid plastic handle broke the micro-switch which shorted the TCO... Read more...
Your Price
$50.56
In Stock
Amana Dishwasher Door Switch
PartSelect Number PS11751645
Manufacturer Part Number WPW10274880
This Whirlpool Dishwasher Door Switch is a crucial element of your appliance's functioning, perfectly suited for select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dishwashers. Once your door aligns and shuts, this switch detects this and ensures a smooth start to your dishwasher's cycle. Mindfully crafted, this is an authentic, OEM part ensuring optimal fit and finishing. For safety reasons, make sure to power off your appliance before attempting to install this component; we also recommend protective gear for your hands. Remember, parts may bear identical appearances but possess subtle size and shape differences ? verify a match with your model before ordering this switch! For a flawlessly functioning dishwasher, secure your Whirlpool Dishwasher Door Switch today.
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$50.56
In Stock
Amana Dishwasher Float Switch
PartSelect Number PS11745484
Manufacturer Part Number WP8268909
Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers this float switch to shut off, thereby shutting off the flow of water into the dishwasher.
Fixes these symptoms
- Leaking
- Not draining
- Will not fill with water
- See more...
Installation Instructions
Robin from Golden, CO
dishwasher overflowed-assumed the problem was the float switch
replaced the broken parts.
Read more...
Your Price
$28.42
Special Order
Amana Dishwasher Door Switch
PartSelect Number PS11747659
Manufacturer Part Number WP99002207
This dishwasher door switch will shut your dishwasher off when the door is opened.
Fixes these symptoms
- Door latch failure
- Will Not Start
- See more...
Installation Instructions
James from Rochester, NY
Door switches were worn. Diswasher would not operate unless extreme pressure was applied to the door.
I pulled the interior of the door until I was able to get to the switches on the door latch. I determined at least one switch was completely worn while the other worked minimally. I then looked for the latch assembly and found out that it was no longer available. So I did some searching and found the exact switches I needed from PartSelect. The switches came in about 3 days which then I installed them. The dishwasher powered right up and stayed on. So in the end it was much cheaper to repair this unit than buy a new one right now. Plus, my wife is happy and so am I. Thanks PartSelect for carrying the parts I needed.
Read more...
Your Price
$49.50
In Stock
Your Price
$47.40
Special Order
Your Price
$52.67
Special Order
Your Price
$28.42
Special Order
No Longer Available
Amana Dishwasher Float Switch
Installed new float assembly, but could not use the float palnut, it had too small of a hole, I substituted a larger one that fit the float better. Note I fitted the palnut to the float (the nut cuts it's own threads in the float) before installing the float. This made installation easier. Next I transferred the two wires from the old float switch to the new float switch in the same positions as the existing switch wires. Then I installed the float switch. Finally, I cleaned up the float switch actuator and screw so that the actuator moves freely on the screw. I then installed the float switch actuator and ran the dishwasher to check for proper operation. Note: this float and switch control the water level in the dishwasher. If the actuator sticks, the dishwasher will fill with too much water and leak. If the float has collected dirt inside, it will weigh more and the water level will be too high, causing the dishwasher will fill with too much water and leak. If the switch sticks or fails the water level will be too high, causing the dishwasher will fill with too much water and leak. That is why I relaced the parts: float and switch. I don't want to go back and work on this again.
Lastly, after a few days of proper operation, I installed the two plates located below the dishwasher door. Job done! Read more...
PartSelect Number PS11747680
Manufacturer Part Number WP99002560
Water that fills your dishwasher lifts this float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.
Fixes these symptoms
- Leaking
- Not draining
- Will not fill with water
- See more...
Installation Instructions
Andrew from Northfield, OH
Dishwasher leaks water
I removed the two plates located below the dishwasher door to expose the float switch. I removed the two screws holding float switch, I removed screw holding switch actuator, then I removed float assembly.Installed new float assembly, but could not use the float palnut, it had too small of a hole, I substituted a larger one that fit the float better. Note I fitted the palnut to the float (the nut cuts it's own threads in the float) before installing the float. This made installation easier. Next I transferred the two wires from the old float switch to the new float switch in the same positions as the existing switch wires. Then I installed the float switch. Finally, I cleaned up the float switch actuator and screw so that the actuator moves freely on the screw. I then installed the float switch actuator and ran the dishwasher to check for proper operation. Note: this float and switch control the water level in the dishwasher. If the actuator sticks, the dishwasher will fill with too much water and leak. If the float has collected dirt inside, it will weigh more and the water level will be too high, causing the dishwasher will fill with too much water and leak. If the switch sticks or fails the water level will be too high, causing the dishwasher will fill with too much water and leak. That is why I relaced the parts: float and switch. I don't want to go back and work on this again.
Lastly, after a few days of proper operation, I installed the two plates located below the dishwasher door. Job done! Read more...
Related Amana Dishwasher Parts
- All Amana Dishwasher parts
- Amana Dishwasher Brackets and Flanges
- Amana Dishwasher Caps and Lids
- Amana Dishwasher Circuit Boards and Touch Pads
- Amana Dishwasher Dishracks
- Amana Dishwasher Dispensers
- Amana Dishwasher Doors
- Amana Dishwasher Fuses
- Amana Dishwasher Handles
- Amana Dishwasher Hardware
- Amana Dishwasher Hinges
- Amana Dishwasher Hoses and Tubes
- Amana Dishwasher Latches
- Amana Dishwasher Motors
- Amana Dishwasher Panels
- Amana Dishwasher Pumps
- Amana Dishwasher Seals and Gaskets
- Amana Dishwasher Spray Arms
- Amana Dishwasher Springs and Shock Absorbers
- Amana Dishwasher Valves
- Amana Dishwasher Wheels and Rollers
- Amana Dishwasher Wire Plugs and Connectors