GE/GE_Thumb/00110774i02.gif
See part 215 in the diagram
Replacing your General Electric Washer MAGNET Assembly play video

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

MAGNET Assembly

★★★★★
★★★★★
1 Review
$8.67   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS960654
Manufacturer Part Number WH12X10276
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Pumps but will not spin | Will not agitate | Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH12X10276 replaces these:
AP3794968, 1089326, WH12X10092, WH12X10329, WH12X10551, WH44X10072, WH44X10097, WH44X10099, WH44X10104, WH44X10126
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Patty
    August 9, 2018
    Washer won't fill, spin, or anything. Press start and get 3 beeps (like lid is open) - if it was the switch and/or magnet - would it not fill, agitate or drain? Could it go bad in the middle of a cycle - before spinning clothes out?
    For model number GTWN4950LOWS
    Hi Patty, Thank you for your question. The lid switch is an important part of the washer. If it is not working correctly, it can cause other functions of the washer not to work. You will need to check it with a multimeter to verify if it is working correctly. I hope this helps. Thank you and have a great day!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Shelly
    April 15, 2019
    Is this the lid switch?
    For model number HTWP1400F2WW
    Hello Shelly, thank you for your question. The Lid Switch for your model is part PS1482372.

    Was this helpful?
    Thank you for voting!
    George
    September 10, 2019
    I have a problem with the washing machine not agitating or spinning but pumps and drains water correctly. I have reset it. I have replaced the lid switch (WH12X10334) and the mode shifter and shaft assembly (WH38X10017). The drive belt and drive pulley are fine. No unusual noises. No leaks. The drive motor led was blinking 4 flashes and a pause which seemed to indicate WH38X10017 needed to be replaced and I did, but it is still blinking 4 flashes and a pause. Any suggestions would be greatly appreciated.
    For model number WPRE6100G1WT
    Hi George, Thank you for your question. If you have tried all of these methods and the washer is still not agitating or spinning, then you will need to check the user control and display board. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    MARIA
    October 23, 2019
    My washer fills and empties but does not agitate or spin out
    For model number WWSE5240G2WW
    Hi Maria, thank you for your question. There are a few parts that you could check for this issue. The physical parts to check for wear and tear would be your belt, tub bearing, the inner tub base hub, and your hub nut. If those parts are fine then you should take a look at your lid switch for being the issue. That part will not allow your appliance to spin if it is malfunctioning. If that part is fine then you may need to look at your shifter assembly or your motor. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Gerresa
    October 30, 2019
    The start button is broken and it won't start washer anymore.
    For model number GTWN4250D1WS
    Hello Gerresa, Thank you for the question. The Start Switch is only sold as part of the Electronic Control Board, PartSelect Number PS8757105. To fix or replace the start switch, the board will need to be replaced. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your General Electric Washer MAGNET Assembly

      Replacing your General Electric Washer MAGNET Assembly play video
      Customer Repair Stories
       Average Repair Rating: 4.7 / 5.0, 3 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Washer wouldn't spin
        Removed front panel, cut two wires to switch ( color coded ) snapped old switch out and installed new switch, connected wires with wire nuts. Removed two screws in lid, removed magnet and installed the new one. A caveman could do it!
        • Timothy from Sidney, OH
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WH12X10334, WH12X10276
        11 of 12 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Washer wouldn't spin the water out of the clothes.
        I wasn't sure what the problem was. I Googled the most common problem for this washer and it pointed to the Lid Switch with Wire Harness. I ordered the part, watched the video provided, and installed it. Installation was just like the video said. Due to the lack of dexterity in my hands due to arthritis, it took about 25 minutes from start to finish. Washer works like new now.
        • Bruce from AVERILL PARK, NY
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Pliers
        • Parts Used:
          WH12X10334, WH12X10276
        5 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        water, spin cycle not functioning
        After receiving the wrong part 2x instead of magnet assy I received a metal clip ring. ordererd magnet assy from another source. iNSTALLATION IS VERY SIMPLE. REMOVE 2 SCEWS IN THE LID WHICH HOLD THE MAGNET IN PLACE AND REPLACE THE MAGNET WITH NEW ONE. TEST TO MAKE SURE ALL OPERATIONS ARE NORMAL.
        • Helmut J from New Berlin, WI
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WH12X10276
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          1 Review
          3.0
          Filter By Rating:
          • 5 Stars
            0
          • 4 Stars
            0
          • 3 Stars
            1
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS960654
              Manufacturer Part Number: WH12X10276
              Brand
              Model Number
              Description
              General Electric
              51451Y2WW
              Washer
              General Electric
              56121TBWW
              Washer
              General Electric
              56220TBWW
              Washer
              General Electric
              56221B0WW
              Washer
              General Electric
              56231B0WW
              Washer
              General Electric
              56241B0WW
              Washer
              General Electric
              56251B0WW
              Washer
              General Electric
              57131TBWW
              Washer
              General Electric
              57271B0WW
              Washer
              General Electric
              57281B0WW
              Washer
              General Electric
              57281B3WW
              Washer
              General Electric
              57281B5WW
              Washer
              General Electric
              57431DCWW
              General Electric
              57441DCWW
              Washer
              General Electric
              57481D0WW
              Washer
              General Electric
              57481D1WW
              Washer
              General Electric
              57491D0WW
              Washer
              General Electric
              57491D1WW
              Washer
              General Electric
              57751H0WW
              Washer
              General Electric
              57751H1WW
              General Electric
              57751H2WW
              General Electric
              57751H3WW
              Washer
              General Electric
              58241TBWW
              Washer
              General Electric
              58251TBWW
              Washer
              General Electric
              58971K0WW
              General Electric
              58971K2WW
              Washer
              General Electric
              58971K3WW
              Washer
              General Electric
              59331TCWW
              Washer
              General Electric
              59341TCWW
              Washer
              General Electric
              CCSR2080Y1WW
              Washer

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service