EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

SHREE General Electric Refrigerator - Instructions

All Instructions for the SHREE
91 - 105 of 634

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cabinet very hot on sides, freezer not 0, running continuously.
3 of 3 people found this instruction helpful.
  • Philip from Los Alamos, NM
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Diagnosis of symptoms was condenser fan not running, due to faulty main board.

First: removed the cover over the main board, which was too hot to touch. Bad design flaw, no ventilation for the board, which I believe made it fail. We got another year of service with the cover removed.

Second: after reading people's ex periences here, ordered the board and popped it in. (Note: needed a pliers to compress each of the 4 plastic studs holding the board in.) Works like a champ.

Third: did NOT replace the cover. At our altitude the air can't conduct enough heat to prevent cooking the board. Need to allow circulation.
Was this helpful?
Thank you for voting!
noisy fan
4 of 6 people found this instruction helpful.
  • ronald from springfield, VT
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
removed cover over fan, four screws. removed two screws ,that holds fan in place,removed two more screws that holds fan in bracket,then reinstalled
Was this helpful?
Thank you for voting!
No ice or water at the despenser. Compressor would turn off when the dispenser lever was pushed. There was also a loud buzzer sound for a couple of weeks prior to the board failing.
3 of 3 people found this instruction helpful.
  • Pat from Pensacola, FL
  • Easy
  • Less than 15 mins
  • Nutdriver
Pulled out the fridge and unplugged electric cord. Took off the back lower right side panel. Unplugged all the connectors and removed the motherboard. Replaced the motherboard and reconnected connectors. Replaced the panel and plugged it in. Works great!
Was this helpful?
Thank you for voting!
clicking nose from mother board
3 of 3 people found this instruction helpful.
  • LEE from WILMINGTON, DE
  • Easy
  • Less than 15 mins
  • Pliers
pulled the board away from the 4 plastic pins, unplugged the wires and plugged them directly into the new noard, pushed board back onto the four plastic pins.......job completed in under 5 minutes. Fridge working fine now for over a week......no problems.
Was this helpful?
Thank you for voting!
Nothing to tell it was a replacement
3 of 3 people found this instruction helpful.
  • Royce from Pasadena, TX
  • Really Easy
  • Less than 15 mins
Nothing to tell it was just a replacement part that the old part was removed and the new one inserted. Works like a dream Thanks
Was this helpful?
Thank you for voting!
ice despensor auger was broken
3 of 3 people found this instruction helpful.
  • George from HIXSON, TN
  • Really Easy
  • Less than 15 mins
Remove the broken bucket and install the new one
Was this helpful?
Thank you for voting!
clickking sounds
3 of 3 people found this instruction helpful.
  • Aurelio from MAYS LANDING, NJ
  • Very Easy
  • Less than 15 mins
Unplugged unit.. Removed control board cover.. Removed all plugs from control board then removed board its self.. Replaced in reverse order.. Unit is working as new..
Was this helpful?
Thank you for voting!
broken ice tray & dispenser, would not dispence ice
5 of 9 people found this instruction helpful.
  • Warren from Kerrville, TX
  • Really Easy
  • Less than 15 mins
part arrived very fast. I removed old try and merly inserted new part which was exactly the same as the one being replaced. I GIVE IT 5 STARS !
Was this helpful?
Thank you for voting!
The bottom shelf that covers the crisper drawers was cracked.
3 of 3 people found this instruction helpful.
  • Joseph from BRENTWOOD, CA
  • Very Easy
  • Less than 15 mins
This was so easy. Got the model number off the refrigerator door. Internet searched and found this website. Ordered the part. Waited maybe 3-4 days for it to arrive. Opened the box, open refrigerator door remove old broken part, install new part and reinstall the drawers. Piece of cake!! So glad I didn’t have to replace a perfectly good r efrigerator. Thank you.
Was this helpful?
Thank you for voting!
Fridge getting warer and warmer
3 of 3 people found this instruction helpful.
  • John from Holly Springs, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver
remove back panel inside fridge freezer side, everything frosted, unplug and used a hair dryer

1. Took out defrost heater and the bottom and tested (per this site) tested OK.

2. Then looked at the defrost thermostat, it was swollen with the top coming off. so i new it was bad
3.clipped and stripped the 2 wires, spliced in the new one with wire nuts and sealed them with silicone. All better
Was this helpful?
Thank you for voting!
replace filter
5 of 9 people found this instruction helpful.
  • Marie from Philidelphia, PA
  • Really Easy
  • Less than 15 mins
just had to unscrew old one put the new one in
Was this helpful?
Thank you for voting!
The fridge was making a clicking sound, and not cooling the food
3 of 4 people found this instruction helpful.
  • Sharon from West Winfield, NY
  • Really Easy
  • More than 2 hours
  • Screw drivers
The back panel was unscrewed, we read the directions with the circuit board and followed them. It was very easy to unplug the old faulty unit and plug in the new replacement part. It was done in 4 minutes flat. Very easy to do yourselves!
Was this helpful?
Thank you for voting!
Not cooling, Defrost issues, whining loud noises
3 of 4 people found this instruction helpful.
  • William from Wylie, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Unbolted the back cover, pulled out old board, replaced with new bored and powered back on. It is working great now.
Was this helpful?
Thank you for voting!
Old cover was cracked and needed replaced
3 of 4 people found this instruction helpful.
  • Richard from Harrisburg, PA
  • Really Easy
  • Less than 15 mins
The repair only required removing nthe old cover and installing the new one. What I was really surprised about is the time for delevery. I ordered the part on Friday morning around 11 AM and it was delevered by Fed Ex at 8:30 AM on Saturday morning. I am not sure how many locations they have, but this must have been close to Harrisburg, Pa.
Was this helpful?
Thank you for voting!
Refridgerator was not cooling
3 of 4 people found this instruction helpful.
  • Terry from The Villages, FL
  • Easy
  • Less than 15 mins
  • Socket set
First, I removed the cover plate from behind the fridge. Next, I carefully pulled the main board out (four little clips holding it in) and disconnected the plug in wires. I connected the wires to the new board, popped it back in place and replaced the cover. Very easy to do.
Was this helpful?
Thank you for voting!
All Instructions for the SHREE
91 - 105 of 634