MRMR General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken plastic handle end caps
1 of 2 people
found this instruction helpful.
-
Joseph from PITTSBURGH, PA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Step #1: Remove 2 screws at the inside top of the oven door that holds the inner/outer oven door together. Step #2: Remove the screws from the inner door that hold the plastic handle end caps to the door. Tip: Use a file to dress up the tips of the metal handle bar so that it fits easily into the new plastic handle end caps. Step #3
... Read more
: Install the first new plastic handle end cap. Step #4: Slide the metal handle bar into the plastic handle end cap that was just installed on the outer oven door. Step #5: Place the other plastic handle end cap on the metal handle bar. Step #6: Install the second plastic handle end cap on the outer oven door. Step #7: Reassemble the oven door by installing the screws that were removed in step #1.
Read less
Was this helpful?
Thank you for voting!
Bad sensor
1 of 2 people
found this instruction helpful.
-
John from CASPER, WY
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
By myself
Was this helpful?
Thank you for voting!
needed burner replacement
1 of 2 people
found this instruction helpful.
-
anthony g from MOUNT PLEASANT, SC
- Difficult
- 1- 2 hours
-
Pliers, Screw drivers, Socket set
There are 18 sheetmetal screws not 8
The GE SREWS HAVE AN INTEGRATED WASHER which causes the philips head to STRIP these needed to be drilled out!!!
The glass top was GLUED to the sheetmetal box and did not come off without a fight
The GE SREWS HAVE AN INTEGRATED WASHER which causes the philips head to STRIP these needed to be drilled out!!!
The glass top was GLUED to the sheetmetal box and did not come off without a fight
Was this helpful?
Thank you for voting!
Orignal oven door handle had multiple fractures and was fast becoming useless.
3 of 9 people
found this instruction helpful.
-
Gerald from Omaha, NE
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed the old handle with the new one.
Was this helpful?
Thank you for voting!
Oven handle broke off
3 of 9 people
found this instruction helpful.
-
Maureen from Locust Valley, NY
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Couple of screws and it was done. Simple and inexpensive since I thought I was going to have to buy a new range.
Was this helpful?
Thank you for voting!
Door Handle bracket was broken
0 of 1 people
found this instruction helpful.
-
Rodolfo from Waterford, MI
- Easy
- Less than 15 mins
-
Pliers
Unscrewed the broken door handle from the range with torqx bit, and replaced, hardest part was getting the plastic handle on the black pull bar. you may want to use a mallet.
Was this helpful?
Thank you for voting!
Oven Door Handle Broke
2 of 7 people
found this instruction helpful.
-
Timothy from Waterford, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the 3 screws from the Door Handle End Cap that was broken and replaced it with the (easily ordered and quickly delivered) New End Cap.
The job was quick easy and we barely remember the door handle at all.
The job was quick easy and we barely remember the door handle at all.
Was this helpful?
Thank you for voting!
Oven door handle end caps broke
4 of 13 people
found this instruction helpful.
-
Danette from Heber City, UT
- Easy
- Less than 15 mins
We were really happy with how quickly the parts we ordered were delivered to us. Replacing the endcaps was quick and easy.
Was this helpful?
Thank you for voting!
End cap broke to the oven door
0 of 1 people
found this instruction helpful.
-
Janet from Roanoke, VA
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
I took the old cap off, and replaced it with the new one. I am glad I had the sense to buy this online, If I had gotten a repairman to fix this, it probably would have costs $100.00 instead of the $17.00 it cost me to fix it myself. Thanks.
Was this helpful?
Thank you for voting!
Both Door Handle End Caps broke
0 of 1 people
found this instruction helpful.
-
Clifford from parkland, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
It took longer to go and buy the star tool then the repair. If you have the tools close it is a ten minute repair....
Was this helpful?
Thank you for voting!
Broken end caps on oven door
0 of 1 people
found this instruction helpful.
-
christine from solsberry, IN
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Very easy fix. After removing the six screws that held the door together, it was a cinch to replace the end caps and put the door back together. Works just like new!!
Was this helpful?
Thank you for voting!
oven door handle broke
0 of 1 people
found this instruction helpful.
-
Sheila from Douglasville, GA
- Really Easy
- 15 - 30 mins
-
Screw drivers
My son took care of removing the broken parts, opening the door and replacing the new handle ends and then finished! It was easy watching him do the work!!!
Was this helpful?
Thank you for voting!
the paint started to chip off.
0 of 1 people
found this instruction helpful.
-
vanessa from runnemede, NJ
- Really Easy
- 15 - 30 mins
-
Wrench set
remove the door, removed about six screws and did a clean up on the glass. the replacement part was screwed back in place. so easy
Was this helpful?
Thank you for voting!
Broken door handle ends.
0 of 1 people
found this instruction helpful.
-
Vince from Newnan, GA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed door from unit, removed two screws on the insideof the door and open door in two, (inside and outside), removed two screws from each door handle end, replaced with new ones and Bingo !!!
Was this helpful?
Thank you for voting!
End caps very difficult to get on the handle bar
0 of 1 people
found this instruction helpful.
-
Jim from Southlake, TX
- Very Difficult
- 1- 2 hours
-
Screw drivers, Wrench set
This the second time in three years the end caps broke. The first time the replacement end caps slid right on but, this time it was an extreemly tight fit. I had to sprsy white greese on the handle bar and inside the end cap and, even then I thought the end caps would break it was so hard to get on.
Was this helpful?
Thank you for voting!