KUDC21 KitchenAid Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
roller axles had broken releasing wheels
2 of 2 people
found this instruction helpful.
-
Linda from Moundsville, WV
- Really Easy
- Less than 15 mins
I ordered 8 new axles and used old wheels. I broke off the remaining axle parts left on the wire lower basket with just my hands, and then popped on the new axles. This was done without tools; just needed significant pressure to pop the axles onto the coated wire. The wheels popped onto the axles with a little pressure. Make sure you
... Read more
have the right side of the wheel out. I simply looked at the remaining working wheels before install began to make sure which side goes out. Very easy install.
Read less
Was this helpful?
Thank you for voting!
Upper Rack would not wash
2 of 2 people
found this instruction helpful.
-
Glenn from Nashua, NH
- Really Easy
- Less than 15 mins
I pulled back the tray and inserted the funnel like part into the rubber tube. That was it. I wonder where the original part disappeared to.
Was this helpful?
Thank you for voting!
Needed an adapter to run the appliance
5 of 12 people
found this instruction helpful.
-
Theresa from Yardville, NJ
- Really Easy
- Less than 15 mins
Very easy,take off the old faucet screen and screw on the adapter. What I really liked was the ease of ordering the part. In less than 5 minutes I had located the part and ordered it. Less than 3 days later, I had the part. Way to go PartSelect.
Was this helpful?
Thank you for voting!
plastic rollers were disintegrating and top rack would fall off
3 of 6 people
found this instruction helpful.
-
Cynthia from Kirtland, OH
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
We have a remote cottage in Canada with a dishwasher over 30 years old. Since you have to get there by boat we didn't want to have to get a whole new dishwasher installed. The plastic rollers from the top shelf had fallen apart and the top rack would fall off all the time. My daughter found your company online and ordered the exact par
... Read more
ts for me! I couldn't believe it. For about $20.00 my dishwasher was fixed by my husband in less than a half hour. It was easy to order the parts from you, they were shipped immediately and worked perfectly. Thank you so much for your help with our dishwasher parts. I was laughed out of Lowe's, Home Depot, Sears and H.H. Gregg when I took my old parts there looking for help with replacement parts. I would recommend your company to everyone.
Read less
Was this helpful?
Thank you for voting!
light wont come on
4 of 9 people
found this instruction helpful.
-
James from Fort Collins, CO
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers, Wrench set
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the break
... Read more
er. Then I saw the short and when I tested the switch it would not click. The install was fine.
Read less
Was this helpful?
Thank you for voting!
Old tube had disintegrated from age
1 person
found this instruction helpful.
-
Allen from NAUVOO, AL
- Really Easy
- 1- 2 hours
ReplacING the tube was not a big job but the old tube had come apart and pieces had lodged in the sprayer arm. I used a toothpick and nut pick to dislodge the pieces and restore full water flow.
Was this helpful?
Thank you for voting!
Dishes come out dirty--not clean--not enuf water ?
1 person
found this instruction helpful.
-
Linden from Tipp City, OH
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Closed water supply--Turned circuit breaker off to dishwasher--removed lower panel on dishwasher--removed the two wires from water inlet valve--disconnected water supply line--removed angle fitting from old valve & installed in new valve--reinstalled new valve & connected water line & 2 wires--This fixed problem.
I ordered part 11:0 ... Read more 0 1/15/09--Recd. new one 10:30 next morning. VERY FINE SERVICE & PRICE from PARTS SELECT.COM--Thanks.
I ordered part 11:0 ... Read more 0 1/15/09--Recd. new one 10:30 next morning. VERY FINE SERVICE & PRICE from PARTS SELECT.COM--Thanks.
Read less
Was this helpful?
Thank you for voting!
my first order a small drip bowl
1 person
found this instruction helpful.
-
marie from WATERBURY, CT
- Really Easy
- 30 - 60 mins
came only I had to order the set again
Was this helpful?
Thank you for voting!
Replacing broken door hinge guide bearing sleeve
1 person
found this instruction helpful.
-
Allen from MOUNT VERNON, WA
- Really Easy
- 30 - 60 mins
Repair was awful without instructions. Instructions were requested twice with no response. Attempted without instruction and broke the sleeve. Reordered but not through Partselect
Was this helpful?
Thank you for voting!
a couple of axles disintegrated so the bottom dish rack wouldn't roll
1 person
found this instruction helpful.
-
Anne from Sebastopol, CA
- Easy
- 15 - 30 mins
-
Pliers
I took out the bottom rack, turned it upside down, popped off the wheels and saved them and put on the new axles. It took a little doing to get the new axles snapped into place-they were stiff. I finally figured out how to use the pliers at the right angle to pop them on. Then the wheels popped right on and off I went.
Was this helpful?
Thank you for voting!
Dryer door wouldn't catch and stay shut
1 person
found this instruction helpful.
-
Melody from TEXARKANA, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I take the screws out of the door, I removed the catch from behind inside the dryer door, I slid the new catch in the door and snapped it in place. After getting a new catch in the door I put the door back together and put the screws in. Easy repair
Was this helpful?
Thank you for voting!
door would stay closed
1 person
found this instruction helpful.
-
william from KILLEEN, TX
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
just replaced parys
Was this helpful?
Thank you for voting!
water delivery tube was rotted and no longer delivered water to the top arm, so top shelf of dishwasher no longer worked
1 person
found this instruction helpful.
-
Janice from NEW COLUMBIA, PA
- Really Easy
- 15 - 30 mins
we used hot water to soften the ends of the tube and then slid it onto the two ends of the parts in the dishwasher. It did take a little bit of "push" to get it on one end, but nothing we could not handle. I would say anyone with common sense and willingness to fix something them selves would have no problem. I would like to say the pa
... Read more
rt I ordered was of good quality and saved me a lot of money.
Read less
Was this helpful?
Thank you for voting!
Replace rubber water delivery tube
1 person
found this instruction helpful.
-
Kim from DALLAS, TX
- A Bit Difficult
- 15 - 30 mins
Like the video showed but very hard to stretch tube over wider part on interior of top shelf. Read afterwards that hair dryer would have helped. Video should mention that. Bruised hands and wrists getting it on good.
Was this helpful?
Thank you for voting!
Dry rotted water delivery tube
1 person
found this instruction helpful.
-
Judy from SCRANTON, PA
- Very Easy
- Less than 15 mins
I put a whirlpool tube on my Jen more dishwasher . Fits like a glove.
Was this helpful?
Thank you for voting!