KUDC21 KitchenAid Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
door latch broke
1 person
found this instruction helpful.
-
Debra from Oakland, NJ
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Pop out the old latch and replaced with a new one
Was this helpful?
Thank you for voting!
door catch broke therefore dryer door would not close
1 person
found this instruction helpful.
-
vernette from sprague, WA
- Really Easy
- Less than 15 mins
just put the new part in the door---sooo easy! THANK YOU!
Was this helpful?
Thank you for voting!
Dry rotted water delivery tube
1 person
found this instruction helpful.
-
Judy from SCRANTON, PA
- Very Easy
- Less than 15 mins
I put a whirlpool tube on my Jen more dishwasher . Fits like a glove.
Was this helpful?
Thank you for voting!
water delivery tube had rotted over time
1 person
found this instruction helpful.
-
Linda from GARLAND, TX
- Very Easy
- Less than 15 mins
followed the tutorial video and just removed the old one and the new one slipped right on.
Was this helpful?
Thank you for voting!
water delivery tube was rotted and no longer delivered water to the top arm, so top shelf of dishwasher no longer worked
1 person
found this instruction helpful.
-
Janice from NEW COLUMBIA, PA
- Really Easy
- 15 - 30 mins
we used hot water to soften the ends of the tube and then slid it onto the two ends of the parts in the dishwasher. It did take a little bit of "push" to get it on one end, but nothing we could not handle. I would say anyone with common sense and willingness to fix something them selves would have no problem. I would like to say the pa
... Read more
rt I ordered was of good quality and saved me a lot of money.
Read less
Was this helpful?
Thank you for voting!
Dryer door would not stay closed
1 person
found this instruction helpful.
-
Gregg from St. Augustine, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
After removing front door panel (2 screws) I removed the old latch catch and replace with the new part. 4 minutes later, the door was back together, the dryer was running and the door was staying closed.
Was this helpful?
Thank you for voting!
catch was missing to close dryer door
2 of 4 people
found this instruction helpful.
-
DONNA from SAN LORENZO, CA
- Really Easy
- Less than 15 mins
The only thing I had to do was hammer the catch inside the square fitting and presto it was done. It took me less than 3 mins. I thought I might of needed instructions, but it was really simple. Even a guy can do it. (smile)
Was this helpful?
Thank you for voting!
The door whould not close enough for the dryer to work.
1 person
found this instruction helpful.
-
Frank from Union Beach, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
Got my parts very quickly.
Popped out the old door latch with a screw driver and pressed in the new one.
Very simple.
Thanks Parts Select.
Popped out the old door latch with a screw driver and pressed in the new one.
Very simple.
Thanks Parts Select.
Was this helpful?
Thank you for voting!
The male part of the door catch was broken
1 of 2 people
found this instruction helpful.
-
David from Chhicago, IL
- Really Easy
- Less than 15 mins
Simply installed the piece and I was done. Took 10 seconds.
Was this helpful?
Thank you for voting!
Dryer door wouldn't shut
1 of 2 people
found this instruction helpful.
-
Amy from Cumberland, RI
- Really Easy
- Less than 15 mins
The door catch kit is soo easy. They give you instructions on which one to use depending on your dryer and it fit perfectly into the door. This was great especially since it was so inexpensive! My husband thought we would have to replace the door.
Was this helpful?
Thank you for voting!
Door wouldn't fasten shut
1 of 2 people
found this instruction helpful.
-
Susan from Laingsburg, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Popped the latch out and popped a new one in.
The real story here is that there was an ANSWER and a SOLUTION, to what was a GREAT
annoyance. If I wouldn't have found a part, I may have run off and bought a new dryer, when I really didn't need to, or paid A LOT of money for a repair man to come out. THANK YOU for your se ... Read more rvice. You made my life easier.
The real story here is that there was an ANSWER and a SOLUTION, to what was a GREAT
annoyance. If I wouldn't have found a part, I may have run off and bought a new dryer, when I really didn't need to, or paid A LOT of money for a repair man to come out. THANK YOU for your se ... Read more rvice. You made my life easier.
Read less
Was this helpful?
Thank you for voting!
The dryer door catch wouldn't hold the door closed
1 of 2 people
found this instruction helpful.
-
Gerald from Thompsonville, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
I ordered the door catch kit on a Wednesday at it arrived Saturday AM. It took less than 1 minute to pry out the old catch with a flat screwdriver and pop in the new one!
Was this helpful?
Thank you for voting!
Element not working
1 of 2 people
found this instruction helpful.
-
Helen from S LAKE TAHOE, CA
- Very Easy
- Less than 15 mins
Ordered element, it came within 3 days.
Removed tab and plugged in, easy peasy ??
Removed tab and plugged in, easy peasy ??
Was this helpful?
Thank you for voting!
The latch on my dryer door wasn't working. I was having to shove a towel in the door to get it to stay shut until I was able to repair it.
1 of 2 people
found this instruction helpful.
-
Dan from Lockport, LA
- Really Easy
- Less than 15 mins
All I had to do was get the model number off of the dryer and plug that information in online and within a couple of days the part arrived. It was great! There were directions that came with the part that explained how to replace the old latch with the new one.
I remember in the "olden days" when I would of had to call a repai ... Read more r guy out and paid a lot more than the $12.00 I did to replace the part myself. And, the only reason it was $12.00 dollars instead of $5-6 was because I had it shipped overnight.
Awesome!
I remember in the "olden days" when I would of had to call a repai ... Read more r guy out and paid a lot more than the $12.00 I did to replace the part myself. And, the only reason it was $12.00 dollars instead of $5-6 was because I had it shipped overnight.
Awesome!
Read less
Was this helpful?
Thank you for voting!
Dryer Door Wouldn't Shut
1 of 2 people
found this instruction helpful.
-
Megan from Kettering, OH
- Really Easy
- Less than 15 mins
My husband is the one who fixed the door. He said he just popped it into place and was done in just a couple of seconds! The best part though was the quick service we received. . . I ordered the part around 10:30 in the morning, and it was at my front door by 5pm the next day!!! What great service!!!! We will definitely do business a
... Read more
gain with partselect. Com if we ever need more parts.
Read less
Was this helpful?
Thank you for voting!