KUDC21 KitchenAid Dishwasher - Instructions

pulled old actuator base off, followed instructions on how to install new actuator - followed them -
piece of cake.

Thanks

Srewed it back on. . . Very simple!

Took old one off , installed new one!!

Hello -

Upper rack fell down unexpectedly one night while loading the dishwasher -- evidentally the rollers had been deterioraring for a long time.

Orderd the new ones from you folks and installed them.

The problem I had was not with the replacement parts received, but making sure they were the correct on ... Read more es 'on line', ( called as well ), and then not having a thin enough wrench to hold the nylon nut while unscrewing the bushings which required a large width screwdriver.

I have already sent you an e-mail saying how happy I am with the new pieces.

Just another example of how the right tools can make everything go a lot smoother, but we everyday consumers often don't have them.....

I have a new faucet so I remove the screen then I used an extender ring put on your adapter an got the washer to run.

I unscrewed the screws and slid the panels in. Very easy. I wanted all the appliances to have a stainless steel look.

Purchased and installed new faucet attachment. It arrived quickly and very easy to attach. Thank you !

Snapped in new ones (8) by hand. I was amazed
how fast I was able to find this part online and the
ordering was easy and in a few days the parts
arrived. No hassle trying to explain to anyone what
part I needed. There were pictures of all parts
available. Ordering online, especially if you
know what you a ... Read more re looking for, is really the way to go.

I squeezed the latch catch with a pair of pliers and pushed it in the catch hole. But that was the final repair. There were two "repairs" before that. First, we used two commercial grade rolls of wide plastic tape to tape the dryer door shut each time we used it, for a year, until we ran out of tape. Second, we positioned a chest of dra ... Read more wers in front of the dryer and wedged a 1" x 4" against the door. Very effective. Then I broke down and ordered the $3 catch.

all that was required was to push the catch into the slot notools needed.

I just pulled out the rack and removed the eight existing roller wheels and roller axles. I was able to remove most of the roller axles with my fingers but needed pliers to remove a couple of them. I then snapped the new roller axles onto the rack and then the roller wheels onto the new roller axles and put the entire rack back in the d ... Read more ishwasher.
The lower rack now rolls smoothly and consistently no matter how many dishes we have piled into it. Also, it has not come off the tracks since replacing the roller axles and roller wheels.

It was easy to remove rack from dishwasher. I screwed on rollers and it was like new!

I pulled off the broken parts and snapped on the new axles, then replaced the wheels. Very simple.

Jimmied out the latch using two screw drivers to get under the edges. Pushed the new piece in. Voila! Took 2 minutes for what my repair man told me would cost about $200 to fix. Unbelievable!!( I first watched some YouTube videos to get the idea )

i pulled the rack out, took off the old parts then added the new ones. it was quick and simple. i needed no tools and my package of parts arrived quicker than i thought. thanks!