EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCSP39WV2WW General Electric Range - Instructions

All Instructions for the JCSP39WV2WW
106 - 120 of 318

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't heat bottom
1 of 2 people found this instruction helpful.
  • Thomas N from Blackfoot, ID
  • Really Easy
  • Less than 15 mins
  • Nutdriver
.First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires and reversed the procedure with the new element very simple.
Was this helpful?
Thank you for voting!
only the inner/smaller part of the dual burner is working
2 of 5 people found this instruction helpful.
  • Albert from South Boston, VA
  • Really Easy
  • Less than 15 mins
I ordered a new burner assuming As is turns out: nothing wrong with the burner.
Was this helpful?
Thank you for voting!
small (inner) burner was not 'burning'
1 of 2 people found this instruction helpful.
  • Jerry from Tierra Verde, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
turn off the power at the breaker first

remove the 2 screws under the 'lip' of the stove top (open the oven door to get to them)

prop up the stove top on the cardboard box the part came in

pull off the wires one by one and attach to the new burner OR record where each wire goes first

remove the old burner (2 screws) and attach the new burner

screw down the stove top

try the burner - when it does not work flip the power breaker back on and then try again

bask in the joy, admiration and wonder directed your way by various family members
Was this helpful?
Thank you for voting!
burned out
1 of 2 people found this instruction helpful.
  • David from Woodbridge, VA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
My dealer was unable to find the part even with a model number. Your accurate drawings allowed me to select correct part. It was a perfect replacement in every way and cheaper (by $10) than the dealer. Also quicker.
Was this helpful?
Thank you for voting!
The oven heating element broke in two.
1 of 3 people found this instruction helpful.
  • Anna from Texas City, TX
  • Really Easy
  • Less than 15 mins
  • Socket set
Rating: 5 Stars!! We cut the power, removed two screws disconnected the two wires (just pulled them out of the covers) from the old element and pushed in the new ones. It didn't take longer than 10 minutes!

This is the first time it's been as easy as promised! Great customer service in addition to easy and reasonable prices !
Thank you,
Was this helpful?
Thank you for voting!
Lower bake element shorted out.
1 of 3 people found this instruction helpful.
  • Val Ray from Idaho Falls, ID
  • Really Easy
  • Less than 15 mins
  • Nutdriver
1st, Turn off the stove at the electrical box. 2nd, Remove the oven door by opening it to the first stop, and then pulled it straight up. 3rd, Remove the 2 screws using a 1/4" nut driver. 4th Pull the old heating element straight out, until the two wires that attach to the element are out 3" from rear oven wall. (Note: Place a peace o f tape around each wire before disconnecting from the element. this will keep the wires from falling back through the holes). Remove the wires from the old element and remove the old element. 4th Place the new element into the oven, place the wires onto the new element. Then reverse the order of removal for new element install, for the repair. Less than 10 minutes.
Was this helpful?
Thank you for voting!
cooktop inner ring did not work
1 of 3 people found this instruction helpful.
  • Matthew from Lexington Park, MD
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Dear PartSelect:

I am very impressed by your service and company. My order arrived in less than 24 hours. It was a perfect match and is currently in service. I am very satisfied with the entire experience and will use your company again.

I simply opened up the cooktop with a screwdriver and disconnected the wire s to the affected burner. After the part arrived, I reconnected them. I had to swap over two brackets from the old burner, so don't throw it away until the new one arrives. It went back together very easily and worked immediately.

Matt Brennan
Was this helpful?
Thank you for voting!
Glass outer door was shattered, needed to be replaced.
2 of 6 people found this instruction helpful.
  • David from Germantown, TN
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Took the frame off of the oven.
attached the outer door to the frame while keeping it flat.
Replaced the frame.
Was this helpful?
Thank you for voting!
baking element sparking
0 of 1 people found this instruction helpful.
  • Maureen from Cedar Falls, IA
  • Really Easy
  • 15 - 30 mins
  • Pliers
1. Turned breaker to the oven to the off position.
2. Removed screws from back of oven-This was the most difficult part of the entire process!
3. Pull out element about 3", then tugged a little harder to expose the wiring.
4. Unhooked wiring from element.
All of this took about 15 minutes.
When new one arrived (less than 48 hours), I did the reverse of the above. This took about 6 minutes replace with new element. Thanks so much!
Was this helpful?
Thank you for voting!
Replace Bake Element
0 of 1 people found this instruction helpful.
  • Jeff from Greensboro, NC
  • Really Easy
  • 15 - 30 mins
  • Socket set
Piece of cake. Pulled range out, unplugged it, opened stove, unscrewed element from back of stove w/ socket wrench, pulled out 1/2 way, unplugged bad bake element from the 2 wires, plugged in new bake element in, reattached to back of oven, plugged in stove and it worked.
Was this helpful?
Thank you for voting!
Bottom element would not heat
0 of 1 people found this instruction helpful.
  • GARY from OREM, UT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Remove two screws holding element. Pull element forward exposing connections. Pull connections apart. Replace with new element. replace screws. Done
Was this helpful?
Thank you for voting!
Bake cycle wouldn't work (broil did)
0 of 1 people found this instruction helpful.
  • Joe from Levittown, NY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Remove dthe two screws and removed the element. Put the new element in and replaced the terminals and screws. Partselected is the fastest shippers on the net.
Was this helpful?
Thank you for voting!
Two stage burner was not working on the outer part of burner.
0 of 1 people found this instruction helpful.
  • Gregory from Pleasant Valley, MO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Locate breaker box and turn off breaker to stove. Removed the two screw in front that hold the top in place. Raised the top and supported it with the box the new burner came in. Removed two screws that held the burner in place and the 5 wires one at a time an installed them on the new burner. Put new burner in place and installed two mounting screws. Reinstalled the two screws in the front to hold the top in place then turned the breaker back on and tested burner. Worked great. Received part in 2 days.
Was this helpful?
Thank you for voting!
oven would not heat on bake
0 of 1 people found this instruction helpful.
  • Larry from Burnsville, NC
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
The hardest part of repair was moving the oven from the cabnets to unplug and gain access to rear of oven. Remove rear cover panel unplug two spade connectors attached to the heating element. Open oven door and remove the two screws holding the heating element to back of oven. Pull heating element out. Then slide the new element in an d assemble in reverse order.
Was this helpful?
Thank you for voting!
Lower oven element burned out.
0 of 1 people found this instruction helpful.
  • Gary from Powder Springs, GA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
First I removed the two screws holding the element to the back of the oven. When I pulled the element out I disconnected the two wires and removed the element. I found the serial / part number on the existing part and order from PartSelect. The element arrived two days sooner than expected!! Replacing the element was a bit more difficu lt in that I had to pull the stove away from the wall and remove the rear cover in order to pull the wires and element through the insulation in the back of the oven. Four screws held the rear cover, but once those were removed the element easily went into place and the repair was finished. Cleaning behind and under the stove took a few extra minutes but the entire repair only took about 30 minutes, plus the wait time for the part. Two tips, pliers were used to disconnect and reconnect the slip-on connectors. The connectors were pretty tight and reaching to the rear of the oven was difficult to get leverage to pull apart and reconnect. Also, the oven light caused considerable glare on my glasses so I taped the door button controlling the oven light and used a flashlight to see inside. Otherwise, a simple repair. PartSelect had the best price on the element and service and delivery were excellent!
Was this helpful?
Thank you for voting!
All Instructions for the JCSP39WV2WW
106 - 120 of 318