EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCSP39WV2WW General Electric Range - Instructions

All Instructions for the JCSP39WV2WW
121 - 135 of 318

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven element caught on fire and burned in half.
0 of 1 people found this instruction helpful.
  • Jean from Springdale, AR
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Simply turned off the power (circuit box). Unscrewed the screws holding the element in place and detached the element from the wires. Replaced with the new element and replaced the screws. Turned the power back on. Easy as pie and saved lots of $$!
Was this helpful?
Thank you for voting!
the burn element on the bottom burned out
0 of 1 people found this instruction helpful.
  • DEMETRA from MEMPHIS, TN
  • Easy
  • 15 - 30 mins
  • Pliers, Wrench (Adjustable)
first i unplugged the stove to disconnect all power. next itried using pliers to unscrew the screws and was having a hard time so hubby got the adjustable wrench and it was much easier. after taking out the two screws, i pulled the element out about three inches and disconnected the element from the two wires that hold it in place. then i snapped the new element in place just as the old one was and reattached the element to the stove using the two screws. after assuring that element was secure, i turned my oven on to 300 degrees and voila!!! we're cookin again!!!
Was this helpful?
Thank you for voting!
Cracked Baking element in Stove
0 of 1 people found this instruction helpful.
  • Lionel from Luling, LA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
Removed two scres that hold element in Place. Pulled out element about 3" and removed wire disconnect. Re-connected new element and re-installed mounting screws. Very easy. Parts were delivered promptly. Great service!!!! Thank you Parts select!!!!! Saved me a trip to Sears to purchas a new element or Stove.
Was this helpful?
Thank you for voting!
oven element was fractured in 5 places
0 of 1 people found this instruction helpful.
  • Sam from ann arbor, MI
  • Easy
  • 15 - 30 mins
  • Pliers
the only challenging thing realizing that the screws in the back weren't for a screw driver, they were for a very small wrench. Since I didn't have such a tool, I just used vice grips. It all went well though. The oven currently heats to 400 degrees in 7.5 min. I am quite happy.
Was this helpful?
Thank you for voting!
Heating element burned out
0 of 1 people found this instruction helpful.
  • Kim from Munsonville, NH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the two screws pulled out the old element and slid the new element in and put the screws back in. I used it that night to bake supper
Was this helpful?
Thank you for voting!
Bake element broke
0 of 1 people found this instruction helpful.
  • Laura from Telluride, CO
  • Easy
  • 15 - 30 mins
  • Socket set
Removed the two screws and pulled out the bake element. Then plugged in the new element and replaced the screw. Easy
Was this helpful?
Thank you for voting!
oven elements sparked and would not turn off
0 of 1 people found this instruction helpful.
  • ophelia from paducah, KY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
removed two screws, pulled element out (which broke at the sparking site) Took screw driver to push off where the element was connected. Put new one in, re-did screws. Turned on and off oven. This company was great to work with, smooth sailing. It was funny when we noticed the problem-Husband said $125.00 repair, I got on net and said no about $40. He is taking me out to dinner tonight.
Was this helpful?
Thank you for voting!
bake element burned out
0 of 1 people found this instruction helpful.
  • Dean from Rolla, MO
  • Easy
  • 15 - 30 mins
  • Nutdriver
I turned the power off.Pushed on the terminals,and used a nut driver to secure the element to the oven back wall.Great service.I recieved the part in 24 hours with reg. shipping at a great price,Unbelieveable!!!
Was this helpful?
Thank you for voting!
Bake element burned out
0 of 1 people found this instruction helpful.
  • eric from Melbourne, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
With less than 24 hrs from ordering to delivery, I was making cookies. Installation was quick and painless.
Was this helpful?
Thank you for voting!
The bottom bake unit burned out
0 of 1 people found this instruction helpful.
  • Larry from Fredericksburg, VA
  • Really Easy
  • 15 - 30 mins
  • Socket set
Very simple. Two small hex shaped screws hold the unit to the back of the stove. Remove those with a small socket wrench. Rachet type makes the job easier. Gently pull the element from the back of the stove. Remove the two push-on wires from the element. They simple pull off. The elements have supporting feet toward the front. Thos e must be down to rest the element on the bottom of the stove. Replace the push-on wires, push the element back into the holes in the rear of the stove and screw the small hex shaped screws back into the oven wall. The job is done.
Was this helpful?
Thank you for voting!
Old Element Was Rusted.
0 of 1 people found this instruction helpful.
  • Joan from Mascotte, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Very well, I made a mistake with the model #. So I had to return and reorder .
Was this helpful?
Thank you for voting!
Element turned into a welder
0 of 1 people found this instruction helpful.
  • Greg from Hamburg, IA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
pulled out oven, unplugged power. Removed back cover for element, disconnect old element. Moved to front of oven and removed the two screws that held the old element,removed old element. Installed new element, connect element, installed cover, reconnect power.
Was this helpful?
Thank you for voting!
The baking element was not heating up
0 of 1 people found this instruction helpful.
  • Karen from Leland, NC
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I followed the directions in the video on the website. The repair was so easy!! I simply unscrewed the screws holding the element in place at the back of the oven, pulled the wires out. This did take a little bit of time, as I didn't want to pull the wire off of the element and lose it in the back of the oven, but I was able to eventua lly work it free from the insulation and make the connectors visible. I slid off the old element, slid the wires back on to the new one and pushed them back into the wall of the oven and replaced the screws. Works like a charm!! I will definitely use your website for other appliance repairs!!
Was this helpful?
Thank you for voting!
Bottom element broke in half
0 of 1 people found this instruction helpful.
  • jason from newcastle, WY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Pulled oven from wall, Unplugged oven from outlet, Took 5/16 nut driver pulled back cover off oven to expose the quick connect wires, Pulled wires off old element, Opened oven door took the 2 screws off bracket on back of oven, Removed old element, Put new element in place, Put the 2 wires back on, Buttoned back up check to see if worked it did ((:
Was this helpful?
Thank you for voting!
bake element arked
0 of 1 people found this instruction helpful.
  • robert from mount pleasant, SC
  • Really Easy
  • 15 - 30 mins
  • Socket set
After watching the video on your website the repair was a cinch. I would never have attempted doing it if I hadn't seen your video. Thanks for saving us a lot of money.
Was this helpful?
Thank you for voting!
All Instructions for the JCSP39WV2WW
121 - 135 of 318