- Home
- JCBP35SK2SS
- Instructions
JCBP35SK2SS General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broker inner glass
4 of 5 people
found this instruction helpful.
-
marc from PARK RIDGE, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers
Very easy to remove the parts and to reassemble
Was this helpful?
Thank you for voting!
top oven heating element
4 of 5 people
found this instruction helpful.
-
marlene from Pilgrim, KY
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I first turned off power, then I removed the old top oven heating element, I connected the new element to power supply then placed the element back into holders.
Was this helpful?
Thank you for voting!
oven would not heat
5 of 8 people
found this instruction helpful.
-
Jim from Williamsburg, VA
- Easy
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers
I removed the 4 hex head screws holding the control panel , then the other 4 slotted screws. Disconnected all wires being careful to keep track of the color coding. Had a little trouble with the adhesive holding the face plate( I don't know why they even used it). Put the new panel in and reconnected it. Re set circuit breaker and tried t
... Read more
he oven. It still wouldn't heat. it wasn't the control panel, but a burned out wire connecting the element in the back of the oven. Well, anyway I learned how to do the job and the the new panel activates better, so all was not lost.
Read less
Was this helpful?
Thank you for voting!
Inner glass assembly had cracked
3 of 3 people
found this instruction helpful.
-
Richard from Gorham, ME
- Really Easy
- 30 - 60 mins
-
Socket set, Wrench set
Took the oven door off and removed the inner door panel, put new glass assembly part in and reassembled. The hard part was getting the door hinges locked back into place.
Was this helpful?
Thank you for voting!
Burned out broiler element.
3 of 3 people
found this instruction helpful.
-
Jack from YORK, PA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Pulled the stove out from between the cabinets, used a blade screwdriver to pop the oven door retainers down and lifted the oven door out, removed the racks. used a 1/4'' nut driver to remove the 5 screws holding the broiler in place. From the time I unplugged the stove from the outlet until I plugged the stove back in was 15 min. I would
... Read more
suggest wearing gloves because the metal frame around the burner element has sharp edges.
Read less
Was this helpful?
Thank you for voting!
OVEN CLOCK CONTROL MALFUNCTIONED
3 of 3 people
found this instruction helpful.
-
Gregoire from N CHESTERFLD, VA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Wrench set
I turned off the circuit breaker and unplugged the stove. I removed the back panel and marked the location of the wires on the new oven clock control. I detached the wires and removed the old card. I installed the new one and reconnected the wires. I plugged the stove and turned on the circuit breaker. All the lights came on and the oven
... Read more
worked fine. I reinstalled the back panel and it took me less than thirty minutes to complete the job.
Read less
Was this helpful?
Thank you for voting!
blew out board by crossing wires..mistakenly toke out bulb assembly to replace bad bulb
3 of 3 people
found this instruction helpful.
-
Ken from CALABASH, NC
- Very Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Turne off power to range..pulled oven out..Took top back panel off with nut driver. 4screws .. Took picture of control board....removed bad control board with Phillips driver...4 screws....installed New board...removed 1 connection at a time and replaced in New board..Turned power on to test new board...check picture to make sure connect
... Read more
ions are correct...turn off power...put back panel back on...put range back in place...turn power back o n...done ..approximate time 15 to 20 minutes..
Read less
Was this helpful?
Thank you for voting!
Heating element burnt out
3 of 3 people
found this instruction helpful.
-
Margie from MYRTLE BEACH, SC
- Really Easy
- 30 - 60 mins
-
Screw drivers
I am a 62 year old woman with NO experience fixing appliances However I didn't have the money for a repairman so I ordered the part and googled "Hiw to change a heating element in a GE range". All the instructions were there and now my oven is working perfectly. I even posted on Facebook for my female friends to encourage them to do repai
... Read more
rs themselves. What a GREAT feeling.
Read less
Was this helpful?
Thank you for voting!
Two sockets for electric elements and their end terminals were badly burned.
4 of 6 people
found this instruction helpful.
-
Marco from Santa Barbara, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
0) Take the back cover of the range off.
1) Carefully noted how the wires and the sockets were connected.
2) Visually checked that the new parts were practically identical old ones.
3) Put together the new sockets from the parts in the kit.
4) disconnect the old sockets and put the new sockets in place.
5) For eac ... Read more h unit disconnect one old wire at the time and connect the new wire. Repeat the same for second wire.
6) Neatly bunch together the rest of the wires with electrical tape. Do not cut the wires!
That's it! It took about 20-30 minutes.
1) Carefully noted how the wires and the sockets were connected.
2) Visually checked that the new parts were practically identical old ones.
3) Put together the new sockets from the parts in the kit.
4) disconnect the old sockets and put the new sockets in place.
5) For eac ... Read more h unit disconnect one old wire at the time and connect the new wire. Repeat the same for second wire.
6) Neatly bunch together the rest of the wires with electrical tape. Do not cut the wires!
That's it! It took about 20-30 minutes.
Read less
Was this helpful?
Thank you for voting!
Oven would not heat up
3 of 3 people
found this instruction helpful.
-
Myron from SCOTTSDALE, AZ
- Very Easy
- 15 - 30 mins
-
Socket set
Changed the lower heating element. Simple, simple, simple. I first went on YouTube and watched a couple of videos. Reassurance is a good thing. Okay here we go. 1) Pull the oven out from the wall 2) UNPLUG 3) remove the racks in the oven 4) Unscrew the (2) screws holding the element to the back wall of the oven. 5) There are t
... Read more
wo (2) connections that you simply pull off. Remove the element. 6) Throw the old heating element away and connect the NEW element where the OLD one was. 7) Put the old screws back in. Plug the oven back in and test. VOILA!!! you are now a repairman.
Read less
Was this helpful?
Thank you for voting!
Burner Knob missing when I moved in my house
3 of 3 people
found this instruction helpful.
-
Jared from Greenwood, MO
- Really Easy
- Less than 15 mins
Open the package and slide the Knobs in place. 30 seconds to place 4 knobs.
Was this helpful?
Thank you for voting!
Grease spilled on old gasket----gasket hardened
5 of 9 people
found this instruction helpful.
-
Delores from Rocksprings, TX
- Really Easy
- Less than 15 mins
Simply pulled old gasket from door and pushed new gasket clips into existing holes and tucked in ends at bottom of door.
Was this helpful?
Thank you for voting!
Incorrect oven temperature due to defective temperature sensor.
3 of 3 people
found this instruction helpful.
-
Anthony from FARMINGVILLE, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
Performed repair using a video for reference.
Was this helpful?
Thank you for voting!
Switch started arcing in the dial range of 2 to 8 in about a year.
3 of 3 people
found this instruction helpful.
-
Brian from HONEA PATH, SC
- Very Easy
- Less than 15 mins
-
Screw drivers
Pulled the range out and unplugged it. Removed the back panel. Removed one wire at a time and plugging it in on the new switch. unscrewed the existing switch from the front panel (Two screws). Screwed the new one in, replaced the panel, plugged in the range and tested it. The new switch was a perfect OEM replacement and worked perfectly.
Was this helpful?
Thank you for voting!
Switch was not turning off range indicator light
3 of 3 people
found this instruction helpful.
-
Charles from PORTLAND, OR
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Pulled stove out and unplugged. At the rear of the range there were 4 faster. Used a nutdriver piece in an electric drill. Pulled off the cover and located the switch. At the front of the stove, I removed the knob and unscrewed two screws releasing the switch. I undid and replaced each wire connector one-by-one to avoid any wrong connecti
... Read more
ons. Replaced and secured the switch and replace the back panel. All secured, power on and fixed! Easy repair, but something that had been put off for a year!
Also follow the installation videos from PartSelect - very helpful!
Also follow the installation videos from PartSelect - very helpful!
Read less
Was this helpful?
Thank you for voting!