- Home
- JCB560DF1WW
- Instructions
JCB560DF1WW General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replacment of burner control switches
-
Judith from Keezletown, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
I watched your video on the subject and followed it exactly. It explained everything I needed to know. The hardest part was CLEANING under the stove once I pulled it out from the wall!
Was this helpful?
Thank you for voting!
none to occasional power to burner elements
-
Mohammed from San Jose, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
Exactly followed the instructional video and my installation was flawless. Now the burners power up and function like new. The whole repair was smooth and easy.
Was this helpful?
Thank you for voting!
The burner would not work.
-
Sue from Fort Oglethorpe, GA
- Easy
- 15 - 30 mins
-
Screw drivers
I pulled the range out, unplugged it, took the back off, unplugged the old terminal block and removed it. Attached the new block and ran the wires through to the back and plugged them in. Reattached the cover on the back of the range, plugged the range back in and pushed it back into place.
Was this helpful?
Thank you for voting!
Drawer glider broke about a year ago.
-
loma from Neah Bay, WA
- Easy
- 15 - 30 mins
-
Screw drivers
My wife could open and close the drawer without too much difficulty, but occasionally, it would not close properly and she would have to empty the contents do could alaign it properly to close. The last time she was talking about buying a whole new drawer. I asked her what the part looked like, as I never to fight with it. I went online a
... Read more
nd found the part for $1.16 plus shipping at $8 plus. It was well worth the time and effort, and I now have a happy wife. Paul Parker
Read less
Was this helpful?
Thank you for voting!
broken light socket
-
James from Monterey, TN
- Easy
- 15 - 30 mins
-
Nutdriver
The only tool needed was a nutdriver to remove the lamp socket. I needed my head mounted light to see what I was doing, and everything went smoothly from there. Simple job.
Was this helpful?
Thank you for voting!
Burner wouldnt heat
-
Mary from Leon, KS
- Easy
- 30 - 60 mins
-
Nutdriver
Watched video,and used it as guideline.Biggest problem was removing tape from old wires.
Was this helpful?
Thank you for voting!
Oven Sensor Replacement
-
Barbara from Edwardsville, IL
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver
The part was just like the old one and would have been an easy fix except our range suffered from a lighting hit. The clips had melted together. Called a dealer and asked about a new wiring harness. He said in those cases just cut the clip off and hard wire with wire clips,or firecrackers. We used wire nuts and taped all together and
... Read more
the oven works just great. Nothing is ever as easy as it should be.
Read less
Was this helpful?
Thank you for voting!
Burner would not turn off
-
Thomas from Winter Garden, FL
- Easy
- 30 - 60 mins
-
Screw drivers
The burner light did not turn off, and the rear burner stayed hot. Unplugged unit and removed switch, which turned off the "burner lit" lamp. Thus I figured it was the switch that was causing the problem. Ordered the switch (I think around $18 and plugged it in. I think there were 4 screws to get the panel off, and then another 2 to get t
... Read more
he switch off. When I plugged the unit back in (it had been unplugged while I waited for the part to ship) it beeped for a while. I had to turn the breaker on and off, and that solved the beeping problem.
Read less
Was this helpful?
Thank you for voting!
2 mounting bracket included, wires too long
-
Fuad from Sarsota, FL
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Pliers
I couldn't tell which one work best till I installed 2 units and I liked the other bracket for stability.The wired were too long and there is not a given way to strap them and keep them away from the heat source.
Was this helpful?
Thank you for voting!
Burner Would Not Turn Off
-
BILLY from WEBSTER, FL
- Really Easy
- 30 - 60 mins
-
Nutdriver
Replace control switch
Was this helpful?
Thank you for voting!
oven continued to get F2, F3 and F5 error messages when ovewn got hot
-
Ralph from Redding, CA
- Difficult
- 1- 2 hours
-
Nutdriver, Screw drivers, Socket set
This repair was quite a bit more difficult then what had been described on the web site. First off, I have a double wall oven that is built in. Sliding it out of the cabinet was difficult and because oven was hard wired, I had to disconnect the actual wiring from the oven back. . Positioning the oven and allowing for it to rest on a s
... Read more
upport bench was the most difficult part The oven is heavy. Eventually, removing the back and top panels of the oven revealed the sensor connection. I was then able to feed it through the oven and reconnect all the wiring harnesses.. Getting the oven back in the cabinet was equally a challenge. But it did seem to fix the problem with over heating.
Read less
Was this helpful?
Thank you for voting!
burner switch needed replacing
-
daniel from norwalk, CT
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers
replaced wire for wire
Other Parts Used:
Was this helpful?
Thank you for voting!
GE Electric Range rear left burner quit coming on
-
Richard from Richmond, TX
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Removed the back top cover with 1/4" nutdriver. Removed the burner terminal block with 1/4" nutdriver. Within 15 minutes had the terminal block kit removed and installed and in service.
Was this helpful?
Thank you for voting!
Needed to replace drip bowls
-
Gloria from Dallas, TX
- Really Easy
- Less than 15 mins
Husband just snapped in place in about 8 seconds! Thanks for the fast delivery and pleasant staff assistant.
Was this helpful?
Thank you for voting!
needed "original style" on older stove
-
David from N. Fort Myers, FL
- Really Easy
- Less than 15 mins
I needed to replace all stovetop bowls and found all after-market bowls "just a little off" effecting how flat the burner rested so called PartSelect's hotline and was assured that if I were using the actual model number found on the stove the parts would definitely fit and not almost fit, guaranteed, and they did!
Other Parts Used:
Was this helpful?
Thank you for voting!