- Home
- JCB560DF1WW
- Instructions
JCB560DF1WW General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Found out Drip Bowls can not be added to self-clean
-
Gary from Renton, WA
- Really Easy
- Less than 15 mins
Dropped in new bowls. I was surprised how in-expensive new ones were.
Other Parts Used:
Was this helpful?
Thank you for voting!
Orange light "Hot Stovetop" lense broke off.
-
John from Woodbridge, VA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Parts arrived in record time and the right parts. The detailed diagram was so helpful in finding exactly the part I needed to order. Was so easy my girlfriend with no mechanical or electrical experience completely helped me through the entire project. She secured the electrical breaker to the range, and I had the top back to the oven r
... Read more
emoved. I showed her how the little white box simply slides off the lens cover, then replaced the new one in the holes and slide it back on. Secured the back and she turned on the breaker back on...and all lights work. Thanks for making this project easy, simple and quick.
Read less
Was this helpful?
Thank you for voting!
Oven light wire broken, damaged socket
-
Patricia from Brandenburg, KY
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.
Was this helpful?
Thank you for voting!
Replaced my drip pans
-
Nancy from Mead, CO
- Really Easy
- Less than 15 mins
The new drip pans are great. I had purchased generic ones locally that were supposed to be universal. The problem was that they did not fit right and the burner coils did not sit flat. The new drip pans fit well and look great too.
Other Parts Used:
Was this helpful?
Thank you for voting!
I ord. drip pans for my Mother in another state
-
Susan from Alpena, MI
- Really Easy
- Less than 15 mins
The drip pans arrived and she switched them out with the old ones Easy!
Other Parts Used:
Was this helpful?
Thank you for voting!
My drip bowls were rusted and corroded
-
Glenda L from Lake Placid, FL
- Really Easy
- Less than 15 mins
I ordered new drip bowls and put them in place. They fit just fine.
Other Parts Used:
Was this helpful?
Thank you for voting!
needed new drip pans-
-
Connice from Massena, NY
- Really Easy
- Less than 15 mins
replaced pans- what I would like to comment on is the time- I ordered one day at noon and had them the next day at noon- I live in tiny town on northern border of USA- it was awesome- I couldn't believe it was them- 24 hours- super job and excellent price too
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip Bowels badly stained.
-
Dean from Hill, NH
- Really Easy
- Less than 15 mins
Unplug heating elements and pick up drip bowels and reinstall elements.
Other Parts Used:
Was this helpful?
Thank you for voting!
Rusted out burnner bolws
-
charles from ft.pierce, FL
- Really Easy
- Less than 15 mins
Remove old burnner bolws and install new ones
Other Parts Used:
Was this helpful?
Thank you for voting!
dirty bowls
-
Richard from Bainbridge, NY
- Really Easy
- Less than 15 mins
used my hands to remove heating element, then remove drip bowls, then install new bowls, then install heating elements, done!!!!!
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner light would not go out.
-
Creed from Topsham, ME
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers, Socket set
Identified the switch that went bad. Order a new one and replaced it. The part came in a timely fashion and I am pleased with the result.
Was this helpful?
Thank you for voting!
Burner Switch Went Out
-
Jim from Prosser, WA
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Turn off power at main electric panel/ move stove away from wall and unplug cord from outlet. Take knob off the front take two screws off the panel, take back panel off and remove the used switch and take and replace the wiring to the new one , one at a time wire for wire. Then put back tighter in reverse of the way you took it off.
... Read more
Plug in cord and move stove back to the wall. Easy
Read less
Was this helpful?
Thank you for voting!
surface burner would not work
-
julio from hobbs, NM
- Really Easy
- Less than 15 mins
-
Nutdriver
watched it on parts select this is a real fast and simple install took longer to pull the range out of its position well started by shuting off the power then double checked that the range was deenergized removed the knob then the 2 screws then on the rear of the range removed the back panel about 8 screws used a nut driver then removed t
... Read more
he old switch removed each wire one by one and pluged each wire into the new switch just as they were on the old switch the new switch was exactly the same so every thing matched up perfect installed the screws to the front which hold the swich in place then the back cover turned on the power and tested the switch every thing working ok done shut off power slid range back into its place turned power back on everything still ok
Read less
Was this helpful?
Thank you for voting!
needed new drip bowls for stovetop GE
-
Patricia from Centereach, NY
- Really Easy
- Less than 15 mins
removed the burners and dropped the drip bowls in. Very easy to do,
Other Parts Used:
Was this helpful?
Thank you for voting!
stained drip bowls
-
Sunny from Salt Lake City, UT
- Really Easy
- Less than 15 mins
unplugged burners replaced drip bowls plugged in burners
Other Parts Used:
Was this helpful?
Thank you for voting!