EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBS86SP3SS General Electric Range - Instructions

All Instructions for the JBS86SP3SS
61 - 75 of 132

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
F2 Warning - Oven overheating
3 of 3 people found this instruction helpful.
  • john from bend, OR
  • Really Easy
  • Less than 15 mins
  • Socket set
I checked various sites on the net and decided that the temperature sensor was the problem. The GE price for the replacement part was about $105, most of the other sites offered the sensor in the $70 range. PartSelect $12.95 When the part arrived, I removed a small self taping screw, pulled the high temperature wire connector into th e oven space, disconnected the quick disconnect fitting, attached the new temperature sensor, pushed the connecting wire into its hole, replaced the screw and that was it. I probably saved about $200 in parts and labor over what a local repairman would have charged. Oh yes!! I first disconnected the power at the breaker box. Very important.
Was this helpful?
Thank you for voting!
Large right burner would only light in the outside and would not stay on
3 of 3 people found this instruction helpful.
  • JoAnne from LAMBERTVILLE, MI
  • Very Difficult
  • More than 2 hours
  • Wrench set
Ordered the part. Received the box damaged and did not realize the part was damaged until our son came all the way from Columbus Ohio to install it. We ordered another part which came in a timely manner. Even though I reported the problem and told them that we are not very computer literate they still would not accept that the part was da maged until we sent a picture. Our son came back from Columbus to install the new part which took about an hour. He took pictures which I was then able to send. They then asked for a serial number. I had already sent all the numbers from the part but that is when they said they wanted the serial number from the stove. We are elderly and getting that required me getting on my hands and knees to get it near the floor. Luckily I was able to get up. After multiple emails I now have to send the part back. Good luck to anyone working with this company. I will be waiting for them to reimburse me for the defective part.
Was this helpful?
Thank you for voting!
Element went out in glass top stove.
4 of 6 people found this instruction helpful.
  • Aleshia from O BRIEN, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Unscrewed the stove top and replaced the element.
Was this helpful?
Thank you for voting!
burner not work
3 of 4 people found this instruction helpful.
  • SILVIA from Midlothian, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Fue muy facil desconectar primero la estufa despues quite los tornillos de la parte superior detras de la estufa, desconecte un cable del switch y lo conecte en el nuevo despues el siguiente hasta conectar todos los cables en el nuevo switch. Lo mejor es desconectar uno por uno para mo mesclar los cables , despues removi el switch de la e stufa y puse el nuevo , puse las partes de regreso y listo conecte la estufa t revise si funcionava el quemador y listo sin ningun problema.
Was this helpful?
Thank you for voting!
Oven Light Assembly damaged
5 of 10 people found this instruction helpful.
  • Jose from Frederick, MD
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
I have a double oven and coincidently I had to replace the two Oven Light Assemblies.
I am really glad about your web site because once I got the number from my oven model you guys were the first ones that came up. Thanks to your prompt and reliable service my oven is back to its original state.

Jose Figueroa
Was this helpful?
Thank you for voting!
Replaced Oven Thermostat Sensor in oven
2 of 2 people found this instruction helpful.
  • C Thomas from SAN MARCOS, CA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
1) Shut off power to oven
2) Removed oven door using snap down hinges on door
3) Removed 4-phillips head screws holding the oven frame to cabinets
4) Pulled oven out of cabinet and set it on stool in front of opening
5) Remove 2-hex screws holding metal shield covering the electrical wiring on back of oven
6) Unpl ugged bad thermostat connector
7) Removed the single hex screw holding thermostat inside the oven
8) Pulled the thermostat and lead wire from oven
9) Fed the new thermostat wire into inside back of oven
10) Reverse steps 1-7
Was this helpful?
Thank you for voting!
broken light cover
2 of 2 people found this instruction helpful.
  • Francis from LAKE ELSINORE, CA
  • Very Easy
  • Less than 15 mins
twisted it in place
Was this helpful?
Thank you for voting!
Replace Thermostat
2 of 2 people found this instruction helpful.
  • Russell from Morgantown, WV
  • Really Easy
  • Less than 15 mins
  • Socket set
Pull oven out away from the wall, unplugged from outlet, removed center cover by removing 5 sheet metal screws. disconnected thermostat sensor from control cable. Opened oven door and removed screw that holds thermostat sensor. Pulled thermostat sensor out replaced with new sensor. Plugged sensor in to control cable. Replace panel and scr ews. Then my wife made me clean the oven. I recommend making the repair when your wife is not home.
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people found this instruction helpful.
  • Gerald from WINTERVILLE, GA
  • Very Easy
  • Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
Stove overheated with an F2 error
2 of 2 people found this instruction helpful.
  • Richard from PHOENIX, AZ
  • Easy
  • 15 - 30 mins
  • Nutdriver
Removed screws holding temp sensor, pulled wire out from behind wall until found connector, disconnected old sensor.
Measured resistance of old sensor and compared with new sensor, they measured nearly the same. Installed the new sensor and tested the stove. Came up to temp ok. No problem since, about 2 weeks.
Was this helpful?
Thank you for voting!
front lift burner not working and surface light on with everything off
2 of 2 people found this instruction helpful.
  • kevin from GAYLORD, MI
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
unplugged the range removed 4 screws from back top cover then took the knob off controller removed 2 screws from behind the knob removed 1 wirer at a time and placed it on the new controller in same order the wires came off put everything back to gather did not fix the problem .
Was this helpful?
Thank you for voting!
Defective switch
2 of 2 people found this instruction helpful.
  • Mary from EDENTON, NC
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Replaced element control switches
Was this helpful?
Thank you for voting!
Oven tempeture off by 50 degrees
4 of 8 people found this instruction helpful.
  • James from CHESTER SPRGS, PA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver
Sensor is in rear and on top ov oven. What could be a 10" job took 45". My problem was the oven door was diffinately in the way. Also I wear bifocals which makes me tilt head to see nuts. I felt like a contortionist. HINT: remove door and give yourself some room to work.
Was this helpful?
Thank you for voting!
Burner spontaneously cycled without knob activation
2 of 3 people found this instruction helpful.
  • Anil from Milpitas, CA
  • Easy
  • Less than 15 mins
  • Screw drivers
First I cut the circuit at the breaker, and then pulled the range from wall to access the access panel. This top panel was held with 4 screws and removable with a standard phillips head screwdriver.

I then removed the 5 wire-crimped fasteners from the defective surface burner switch. (I first labeled these wires to ensure cor rect placement to the new switch). There were an additional two screws behind the corresponding knob that needed to be removed in order to completely remove the old switch.

The new switch was installed in reverse order to the steps indicated above (two screws behind knob, 5 wire-crimped fasteners, 4 screws to panel). Range was pushed back into position and breaker turned on.
Was this helpful?
Thank you for voting!
Erratic oven temp
2 of 3 people found this instruction helpful.
  • Gail from Glen Allen, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Socket set
RE: 2 yr. old GE double wall oven with convection option in upper oven, non-convection in lower oven: baked goods were not browning, were undercooked or burned. Tested both ovens on regular bake setting using 2 oven thermometers. Set ovens for 350. Although after 10 min both ovens beeped "ready", the oven thermometers actually read 20 0 - then would swing up as high as 500 and as low as 200 during the 20 min test period. Decided to first replace top oven sensor only, just in case it really was a more expensive control panel problem. It was a bit awkward to reach back there with the oven door in the way, but I have long arms! Aimed my flashlight, removed nuts with a socket wrench, pulled out the sensor, popped the clip and the old sensor easily separated from its connection. Snapped on the new sensor, pushed it back in and reset the nuts. Easy. Set the oven for 350 and tested again with 2 oven thermometers for 45 min. Voila! The oven thermometers read exactly 350 when the oven beeped "ready" and it stayed at 350 throughout the entire 45 min retest period with only a 3 degree variation both up and down. What a great improvement! Immediately went online to Parts Select and ordered another sensor for the bottom oven which was having the same problem. Fixed both ovens all for under $30 - and just in time for Christmas cookies! Don't want to know what the repair guy would have charged.......Merry Christmas!
Was this helpful?
Thank you for voting!
All Instructions for the JBS86SP3SS
61 - 75 of 132