- Home
- JBS86SP3SS
- Instructions
JBS86SP3SS General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
f-2 or f-3
-
daniel from gap, PA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
remove two bolts in on sensor and slip thru back un plug and reverse to put in
Was this helpful?
Thank you for voting!
Replacment of burner control switches
-
Judith from Keezletown, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
I watched your video on the subject and followed it exactly. It explained everything I needed to know. The hardest part was CLEANING under the stove once I pulled it out from the wall!
Was this helpful?
Thank you for voting!
Pilot light out
-
Henry from Sonoita, AZ
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Removed the power plug from the wall, screwdriver and small socket allowed me to remove the front control panel. Once I located the pilot light I pulled off the holding clips and placed a new light into the holding clips...problem solved.
Was this helpful?
Thank you for voting!