JBS034N1 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Element burned out
1 person
found this instruction helpful.
-
Wendy from CHESHIRE, CT
- Really Easy
- 15 - 30 mins
-
Socket set
My husband first turned the main breaker off to the stove. Pulled the stove away from wall, took off the back plate, unhooked the element and out the new one in!!
Was this helpful?
Thank you for voting!
No heat from bake element
1 person
found this instruction helpful.
-
Roberta from Southampton, NJ
- Really Easy
- Less than 15 mins
-
Socket set
Ordered part, took old bake element out, installed new bake element. It was real easy.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person
found this instruction helpful.
-
Lavona from JACKSONVILLE, FL
- Very Easy
- Less than 15 mins
-
Screw drivers, Socket set
Flip the circuit breaker going to oven off, then used a 1/4 inch socket on the mounting flange bolts and the bolt head screws attaching the wires. Then used a flat head screwdriver to reattach the wires with the supplied screws and bolted the new element in place. Back to the circuit breaker flipped the switch and turned the oven on to te
... Read more
st it, and now works fine. *be sure to remove the sticker before installation, use rubbing alcohol to remove any residue.*
Read less
Was this helpful?
Thank you for voting!
Bottom oven heating element was out
1 person
found this instruction helpful.
-
John from FALL RIVER, MA
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Very easy repair. 2 hex head screws to take the heating element out. Then 2 more slot head screws for the wire connections. Perfect fit and operation of the new heating element.
Was this helpful?
Thank you for voting!
The bottom bake element burned out.
1 person
found this instruction helpful.
-
Pauline from DECATUR, GA
- Really Easy
- 30 - 60 mins
-
Screw drivers
1. Cut power off. 2. Remove old element, make sure you do not lose the screws, pull the connecting posts out and we used strings on posts so they could not get lost in the wall. 3. We then replaced the new element with little of no problems, it took approximately 30-45 minutes for the whole process.
Was this helpful?
Thank you for voting!
Element had a crack in it and was shooting sparks from it
1 of 2 people
found this instruction helpful.
-
Tiffany from WINCHESTER, KY
- Very Easy
- Less than 15 mins
-
Screw drivers, Socket set
Unplugged range. Removed old element from back of oven which was held in by two screws. Unscrewed the wires that were attached to old element and screwed them into the new one.
Was this helpful?
Thank you for voting!
Bake element burned out
1 of 2 people
found this instruction helpful.
-
Dora from Port Orange, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Turned off power. Removed oven racks. Removed the 2 screws that held the element in place. Pulled element out about 3 in. & disconnected 3 wires. Placed new element, reconnected 3 wires & reconnected the 2 screws that hold element in place. Turned power back on & it works great!!. Was very pleased at how easy it was & also how fast I re
... Read more
ceived the part, which was day after I ordered it.
Read less
Was this helpful?
Thank you for voting!
lower element did not heat
1 of 2 people
found this instruction helpful.
-
mary from cape coral, FL
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
First shut off power to the store and used a socket set to remove 2 screws and disconnnect the element. Connected the new element but had to use the old screws as the new ones did not work with my appliance.
Was this helpful?
Thank you for voting!
Bake element failure
1 of 2 people
found this instruction helpful.
-
Daniel from St Mary's, GA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I removed the old element and replaced it with a new part. It was very simple.
The power was turned off. The elemnt wiring was removed. The new one was installed in reverse order. Power back on and the oven tested just fine.
The power was turned off. The elemnt wiring was removed. The new one was installed in reverse order. Power back on and the oven tested just fine.
Was this helpful?
Thank you for voting!
no power going to burner when switch is on, switch bad
2 of 5 people
found this instruction helpful.
-
Robert from Woolwich Twp., NJ
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I followed the easy instructions and everything went well. I had the new switch installed in about 30 minutes. My wires were different colors than on the instructions but it was still easy to figure out where the wires went on the new switch. Just do not be in a hurry and make sure you measure before you break off the extension bar. My kn
... Read more
ob fit on the new switch without any of the parts that came with the switch.
Read less
Was this helpful?
Thank you for voting!
Oven would not heat, but broiler, burners and thermostat was clicking, so we figured it was the bake element.
1 of 2 people
found this instruction helpful.
-
Patricia from Reading, MA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Had to take back panel off of the inside of the oven to get to the screws to remove the old element and attache the new. Removed the two screws to remove the old, pulled it out unattached the wires and attached the new one.
Was this helpful?
Thank you for voting!
Lower oven element burnt out
1 of 2 people
found this instruction helpful.
-
Brenda from Elida, OH
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers, Socket set
I first removed the two hex head screws, pulled the element slowly forward about four to five inches and disconected the two wires on the old element.
I removed the old element and attached the wires to the new element. I then slowly pushed it back into the rear wall of the oven, carefull not to disturb the insulation around the ... Read more opening and replaced the two screws that hold the element to the back wall of the oven. It was easy enough to do, even for a woman. I turned on the oven and it worked great. No problems so far.
I removed the old element and attached the wires to the new element. I then slowly pushed it back into the rear wall of the oven, carefull not to disturb the insulation around the ... Read more opening and replaced the two screws that hold the element to the back wall of the oven. It was easy enough to do, even for a woman. I turned on the oven and it worked great. No problems so far.
Read less
Was this helpful?
Thank you for voting!
bake element burned out
1 of 2 people
found this instruction helpful.
-
Joe from Ashland, MO
- Really Easy
- Less than 15 mins
-
Nutdriver
removed the two screws, unsnapped the burnedout element and snapped new element in place, replaced two screws.
Was this helpful?
Thank you for voting!
element burned out
1 of 2 people
found this instruction helpful.
-
Randy from Seagoville, TX
- Really Easy
- Less than 15 mins
-
Nutdriver
Could not believe how fast the part shipped. 2 days and it was here. All it took was using a nut driver to remove 4 screws and then put the new one in.
Was this helpful?
Thank you for voting!
Oven Element wouldn't heat
1 of 2 people
found this instruction helpful.
-
Rachelle from Oakdale, CA
- Really Easy
- Less than 15 mins
-
Socket set
My 17 year old son and I (his mom) replaced the oven element in less than 15 minutes!!! It was so easy. We first unplugged the stove since I didn't want to go and shut off the circuit breaker in the dark!! We then removed the two screws that hold the element in place and started to pulled out the element. It was actually corroding in m
... Read more
y hands as I pulled it out. We disconnected the wires and then put in the new element by reconnecting the wires, pushing the connections back in and replacing the two screws that hold the element in. The oven heated right up!!! What a savings to do it yourself and not have a repairman charge us extra to do a 10 minute job!! Thank you Part Select for your fast service. I will definitely look here before I shop anywhere else. Thanks,
Read less
Was this helpful?
Thank you for voting!