EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBS034N1 General Electric Range - Instructions

All Instructions for the JBS034N1
76 - 90 of 355

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven heating element was broken
1 person found this instruction helpful.
  • Daniel from Denver, CO
  • Really Easy
  • 15 - 30 mins
  • Pliers
I removed the 2 screws and the 2 wires from the broken heating element. I removed the broken oven heating element. Then I attached the 2 wires to the new heating element and put the 2 screws in to attach the new heating element into the oven. The new oven heating element worked just fine and I was done.
Was this helpful?
Thank you for voting!
Element at the bottom of oven cracked
1 person found this instruction helpful.
  • AMELDA from BRYANS ROAD, MD
  • Really Easy
  • 15 - 30 mins
  • Pliers
First I turned off the circuit breaker leading to the oven. Then I removed the two screws that held the old element in place. I pulled out the element and disconnected the wires. I reconnected the wires to the new element and pushed it back in place. I then secured it with the two screws. I turned the circuit breaker back on and turn ed on the oven. Works just great!!!
Was this helpful?
Thank you for voting!
Element either shorted or burned out.
1 person found this instruction helpful.
  • Patrick from Durham, NC
  • Really Easy
  • 15 - 30 mins
  • Pliers, Socket set
Removed two socket head screws form inside oven rear wall. Pulled element out and disconnected two screws attaching wiring. Replaced with new.
Was this helpful?
Thank you for voting!
Bake element developed a hot spot that burned through it.
1 person found this instruction helpful.
  • Paul from Slatington, PA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Easily removed two screws, pulled the wires out of the oven wall, disconnected the old and reconnected the new, pushed it back into the insulation, inserted the screws and tightened them. There was a problem with the model number. It was on a vinyl plate inside the oven drawer wall. The plate was slightly yellowed so I used my fing er to wipe the yellow away. When I did, the model number ended up as a black smudge on my finger tip. GE's engineers could have come up with a better method of displaying the model number. GE's customer service operator, however, did an excellent job of helping me to ascertain, at least, some of the number.
Was this helpful?
Thank you for voting!
boken element
1 person found this instruction helpful.
  • cynthia from snyder, NY
  • Really Easy
  • 15 - 30 mins
  • Wrench set
remove screws attaching burner plate to back of oven, pull out element, undo wiring to old burner by unscrewing 2 screws, remove old burner, reverse process to put new burner in
Was this helpful?
Thank you for voting!
Oven lower Bake Element exploded
1 person found this instruction helpful.
  • Fred from Renton, WA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Socket set
First observed the situation to determine if I should try and repair. I decided I could and should. Got the element and proceeded. I first turned the power off at the circuit breaker to cut the electrical power to the stove then I removed the two screws that holds the unit in place and then pulled unit out to where I could see the wire co nnection; removed the two screws on the wire connection and replaced the old element with the new element. reinserted the unit back into position and replaced the two screws that holds the unit in the stove. Turned power back on and tested the oven for any problems. Stove is working great.
Was this helpful?
Thank you for voting!
Baking element no longer worked.
1 person found this instruction helpful.
  • Stanley from Cave Creek, AZ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Removed 4 screw nuts and replaced with new baking element using same 4 screw nuts. Real easy job.
Was this helpful?
Thank you for voting!
The bake element burned in half.
1 person found this instruction helpful.
  • RICHARD from BETHLEHEM, PA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
First I turned the power off to the oven/stove at the breaker box in the basement. Then I took the back plate off. Then I removed the two screws holding the wires onto the damaged element. Then I removed the two screws holding the element to the inside rear of the oven. Then I pulled the old element out and replaced it with the new elemen t. I replaced the two screws that hold the element to the inside of the oven. Then I replaced the wires on the element where it protruded at the back of the oven. I put the back plate back on, slide the oven back in place and turned the power back on at the breaker and everything worked.
Was this helpful?
Thank you for voting!
The bottom oven heat element didn't work
1 person found this instruction helpful.
  • Marilee from Newburgh, IN
  • Easy
  • 15 - 30 mins
  • Pliers, Socket set
1. Removed the old element. Had a little trouble loosening the screws. After we got them loose, everything was easy.
2. Pulled out the element and disconnected the wires.
3. Connected the wires on the new element.
4. Screwed the element back in.
5. Connected the stove and turned on the oven.
6. It works like a ne w one.
Was this helpful?
Thank you for voting!
Bake element shorted and broke
1 person found this instruction helpful.
  • David from Littleton, CO
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
TURN OFF CIRCUIT BREAKER before doing anything even if oven is not turned on! If I hadn't checked voltage with tester before starting I would have made a shocking discovery.
1) unscrewed shield cover to get get at the element screws.
2) unscrewed element screws and removed old element - pulling connecting wires out about 3 inch es
3)attached new element to connecting wires (2 screws)
4) pushed new element into place and reattached element connector plate to wall of oven
5) reattached shield cover to wall of oven
Was this helpful?
Thank you for voting!
bake element no heat
1 person found this instruction helpful.
  • larry from buckhannon, WV
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
took old element out , put new element in.very easy.
Was this helpful?
Thank you for voting!
Oven wouldn't heat
1 person found this instruction helpful.
  • Doug from Sewickley, PA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Couldn't be a much simpler repair. You pull the old element off by removing two screws. Then you slide the old element toward you several inches and remove the two screws holding the wires that are attached to the old element. To replace, just do everything in reverse. One cautionary measure, even though the oven is off, there is stil l a small amount of electricity going to the element. Turn the stove off at the circuit breaker, or unplug the stove before you attempt the repair.
Was this helpful?
Thank you for voting!
Really old range. Broken bake element in oven.
1 person found this instruction helpful.
  • Kathleen from Grand Rapids, MI
  • Very Easy
  • Less than 15 mins
Turned off power. Removed old broken one installed new one in minutes. Turned power on and tested it out. If this 60 something lady can do it, you can too.
Was this helpful?
Thank you for voting!
Bottom Bake Element had burnt into/split
1 person found this instruction helpful.
  • Miranda from UNION GROVE, NC
  • Really Easy
  • Less than 15 mins
  • Socket set
Very easy and simple/ After making sure power supply was off, removed socket screws in back plate of element, slid old element out, attached new element and replaced/tightened socket screws on plate and new element. Power on, oven on .. heated quickly and nicely. Used oven several times since ... no problems.
Was this helpful?
Thank you for voting!
Oven heating element failed
1 person found this instruction helpful.
  • megrew, from COLORADO SPGS, CO
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Identify oven breaker and turn off power before starting. Opened oven door. Removed oven racks. Use 1/4" socket or nut driver to remove the 2 bolts holding heating element mounting bracket at rear base of oven. Carefully pull element out of installation mount to remove the 2 machine screws that attach electrical wires to the heating eleme nt. Reattach wires in same order as original element. Then reinstall new element in reverse order of removal. Took all of maybe 15 minutes! Excellent OEM Parts!
Was this helpful?
Thank you for voting!
All Instructions for the JBS034N1
76 - 90 of 355