EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBS034N1 General Electric Range - Instructions

All Instructions for the JBS034N1
121 - 135 of 355

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
bottom stove element went out
0 of 1 people found this instruction helpful.
  • Georgia from Groesbeck, TX
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
removed the old, replace the new. The delivery of my new part was exceptional, received the very next day after ordering.
Was this helpful?
Thank you for voting!
My baking element had broken
0 of 1 people found this instruction helpful.
  • Elyse from Mankato, MN
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
My sons helped with that. They had to use a pliers to remove the old screws (did not have to notches). After that they they removed the element. Then the wires had to be disconnected (after we unplug the oven from the main power source. Then the wires were connected to the new heating unit. We only got one screw in so far will work o n getting the second one in when they return tomorrow. I did turn on the oven and it works!!!

Thank you to the nice young man that helped me on the phone.
Was this helpful?
Thank you for voting!
Bake element burned out
0 of 1 people found this instruction helpful.
  • Mark from Fleming Island, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Simple replacement. Price for replacement was excellent. Cheaper than any replacement I priced locally and arrived the day after I ordered.


Thanks!
Was this helpful?
Thank you for voting!
Needed to replace the lower heating element in my oven
0 of 1 people found this instruction helpful.
  • mark from tallahassee, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set, Wrench (Adjustable)
1)Unscrewed the mounting nuts, 2) pulled the heating element out a couple of inches, 3) unscrewed the screws holding the wires in place, 4) removed and tossed the old heating element, 5) placed the new heating element in place, 6) re-screwed the wires to to the element, 7) pushed the heating element back into the wall of the oven, 8) rese t the mounting nuts, 9) cleaned up the work area, 10) cranked up the oven and made a pizza. I'm not particularly skilled when it comes to things of this nature, but it was ridiculously easy...
Was this helpful?
Thank you for voting!
The control knob stem broke off when I moved the stove.
3 of 10 people found this instruction helpful.
  • Jonathan from Harvard, MA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I located and removed 2 sets of hex-head screws under the front lip of the cooktop, then lifted the entire cooktop to access the burner controls. Removed the wires and taped them, and took out the old control after removing 2 phillips head screws. Installed replacement part easily. Only tricky part is that the various shaft adapters do n't quite work with my knob. I'll fix it completely with a bit of epoxy and the adapters they sent.
Was this helpful?
Thank you for voting!
Bake element burned out
0 of 1 people found this instruction helpful.
  • Phyllis from Metropolis, IL
  • Easy
  • 15 - 30 mins
Actually you are right, I removed the two screw pulled the element out , disconnected the two wires holding the old element and put the new one on. I spent more time finding out whether or not it would be safe to work on it, being on my own for the first time and always had someone do it for me. I was told as long as the oven was not on it was safe and so I went to work. I was also very impressed at the short time it took to get the part. Three days!!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
Old element burned into. A piece approx. 2in long burned into.
0 of 1 people found this instruction helpful.
  • Ward W from Keyser, WV
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Removed the two screws which held the element in place. Then I pulled the element out about 2-3 inches and disconnected the two wires. Of course I turned off the breaker which fed the range. This had been done earlier so that wife could throughly clean the oven while the element was out of the way, When the new element arrived, we put it into the oven, reconnected the wires to the lugs on the element, pushed it back into the hole, pushed the insulation which protruded back into the hole, and replaced the two screws which held the back plate in place. Turned the breaker back on and turned oven on to test the repair job. Everything worked AOK.
Was this helpful?
Thank you for voting!
Burned out element.
0 of 1 people found this instruction helpful.
  • Gordon from Converse, TX
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Two screws to remove the element and two screws for the wire connectors and it was done.
Was this helpful?
Thank you for voting!
Baking part of oven stopped working
0 of 1 people found this instruction helpful.
  • Karen from Melba, ID
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
First I turned off the power to the stove,removed oven racks,removed the two screws that held the element in place,pulled unit out a couple inches ,removed the two screws that held the wires in place ,removed element.
Placed new unit where old one went and placed wires in proper order and put together and placed back . turned power back on and WALAA......nothing......apparently that wasnt the problem....Husband baught me a new stove,after 35 years why not.
Was this helpful?
Thank you for voting!
Oven wouldn't heat
0 of 1 people found this instruction helpful.
  • Brian from Ohmaha, NE
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Remove the 2 screws, pull out the backing element. remove the 2 screws and replace the element....pay attention to what wire go where.
Was this helpful?
Thank you for voting!
bottom oven element would not heat up
0 of 1 people found this instruction helpful.
  • Jean from Burlington, WI
  • Really Easy
  • 15 - 30 mins
Ordered the part online, received it in a coupledays and my son-in-law installed it in a flash. The cost was very reasonable also. The whole experience was a snap. Thanks so much!
Was this helpful?
Thank you for voting!
Heating element went out!
0 of 1 people found this instruction helpful.
  • Sheila from Arlington, TX
  • Really Easy
  • 15 - 30 mins
1) turned off breaker to oven
2) removed oven racks
3) removed screws holding old element
4) pulled out element far enough to remove 2 wires attached to old element
5) noted colors, left white, right black
6) attached new element to wires
7) attached new element to oven
8) put back oven racks
9) tur n breaker back on
10) test oven
done
EASY!!
Was this helpful?
Thank you for voting!
bake element sparking..then a complete break in the element.
0 of 1 people found this instruction helpful.
  • orin from loganville, GA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I first remove the oven door, which is very east on this model. You tilt it a quarter of the way when you open it to use and pull up. It comes off very easy. My second step was pulling on the bake element towards the front. It will expose the wiring connection to the bake element. You will see two wire that are attached by two one screw for each connection. You will need a nut driver to remove. The removal is very simple. Note: Please be sure to turn off your circuit breaker to the oven! ( this is a safety measure,plus it will make you more at ease with the installation. You then can remove the screw nuts & replace with you new bake element. A real piece of cake & very easy even for a average home-owner. Thanks to Part Select for ease of ordering this item. It is a very friendly website! Thanks! Orin
Was this helpful?
Thank you for voting!
element broke/burnt in pieces
0 of 1 people found this instruction helpful.
  • BARBARA ANN from CINCINNATI, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Unscrewed the two screws that held it in place; disconnected the old; connected the new; replaced the screws. DONE.
Was this helpful?
Thank you for voting!
Heating element had gone out in oven.
0 of 1 people found this instruction helpful.
  • Brad from Cottage Grove, MN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I removed the old element after turning off the breaker to the oven. Remove the two screws that hold it to the back wall of the oven, slid it towards me exposing the wire connection. Removed the screws from the wires and removed the old element. Cleaned the oven and installed the new element by reversing the steps I just talked about. Qui ck and easy, oven has never worked better.
Was this helpful?
Thank you for voting!
All Instructions for the JBS034N1
121 - 135 of 355