J797D2 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
original trim rings
0 of 1 people
found this instruction helpful.
-
larry from fort wayne, IN
- Really Easy
- 15 - 30 mins
replace trim rings with the new shiny ones I got from parts select. Thank you!
Other Parts Used:
Was this helpful?
Thank you for voting!
replacing old rusted drip pans w/ rings
0 of 1 people
found this instruction helpful.
-
steven from peabody, MA
- Really Easy
- 15 - 30 mins
simply lifted the heat coil and slid the rings off and lifted the drip pans off. Vacumed the bottom underneath the old pans. Cleaned the grease off around the stove where the rings sat. Let it dry and added the new rings and pans. Looks like it did 30 years ago.......let them try making a stove last that long today !! Make sure the power
... Read more
is OFF at the electrical box.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Broiler Element burned out.
0 of 1 people
found this instruction helpful.
-
George from Lecanto,, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
The replacement was straightforward, six screws. Instructions were provided with the part along with the necessary screws to fit the new element terminals.
Open the breaker, verify power is off, remove the old burner. Install the new burner and mounting bracket. Restore power and test. In and out in less then thirty minutes.
Open the breaker, verify power is off, remove the old burner. Install the new burner and mounting bracket. Restore power and test. In and out in less then thirty minutes.
Was this helpful?
Thank you for voting!
Blown Broiler Element
0 of 1 people
found this instruction helpful.
-
William from Kalama, WA
- Really Easy
- 15 - 30 mins
-
Nutdriver
Removed 3 screws from cover {center of back side of oven}, removed 2 screws from wires connected to element, then removed 2 screws mounting element
{inside oven}, pulled it & replaced it.
{inside oven}, pulled it & replaced it.
Was this helpful?
Thank you for voting!
Replace Broiler Element
1 of 4 people
found this instruction helpful.
-
William from Chapel Hill, NC
- Really Easy
- 15 - 30 mins
-
Screw drivers
After an exhaustive search of local oven dealers and big box stores, I could not find a broiler element for my aged GE stove. I did find it online at Parts Select for about 1/3 the cost from GE online parts.
Replacement was easy-- just as described in posts for this part. The 'hardest' job was getting the screws started that ... Read more hold the wires to the element-- small screws and small holes-- but just required some patience. A simple, inexpensive repair that avoided my having to replace the entire stove. Thanks!
Replacement was easy-- just as described in posts for this part. The 'hardest' job was getting the screws started that ... Read more hold the wires to the element-- small screws and small holes-- but just required some patience. A simple, inexpensive repair that avoided my having to replace the entire stove. Thanks!
Read less
Was this helpful?
Thank you for voting!
broiler element wa burned out
0 of 1 people
found this instruction helpful.
-
joan from coram, NY
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I shut down the electric to the oven at the circuit breaker. Then i loosened the mounting screws and pulled the element from the back wall of oven. Then i disconnected the two leads to the element with a phillips screwdriver and removed element. Installation was done in reverse order.
Was this helpful?
Thank you for voting!
broil element had a "burn through", w/n turn on
0 of 1 people
found this instruction helpful.
-
BRIAN from WEST POINT, UT
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
less than 15 minutes R2 the part, ops ck'd good. 4ea 1/4" screw/nuts, they didn't fight me...
Was this helpful?
Thank you for voting!
both oven and broiler coils were burnt out
0 of 1 people
found this instruction helpful.
-
margaret from lantana, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
extremelyquick delivery on standard mail and so easy to install and really the lowest price. so happywith this company
Was this helpful?
Thank you for voting!
needed to replace drip bowl and trim ring
0 of 1 people
found this instruction helpful.
-
Stephanie from Kitty Hawk, NC
- Really Easy
- Less than 15 mins
The replacement drip bowl and trim ring fit perfectly.
Other Parts Used:
Was this helpful?
Thank you for voting!
replaced trim rings and drip pans
0 of 1 people
found this instruction helpful.
-
Louise from Wesley Chapel, FL
- Really Easy
- Less than 15 mins
Simple replacement on an old "built in" range in good condition but drip pans and trim rings soiled beyond cleaning. Stove top, although 20+ years old, now looks like new. So glad to find parts were still available as "universal" replacement parts for the 8 inch burner do not fit. Delivered to my door in days.
Other Parts Used:
Was this helpful?
Thank you for voting!
Original parts lost or discarded by prvious owner
0 of 1 people
found this instruction helpful.
-
Steven from West Melburn, FL
- Really Easy
- Less than 15 mins
Just replaced drip pans and rings on stove
Other Parts Used:
Was this helpful?
Thank you for voting!
Old and corrosive due to age
0 of 1 people
found this instruction helpful.
-
Donald from McConnells, SC
- Really Easy
- Less than 15 mins
After receiving parts, was getting rims unpackaged and removing the old rims, then and installing the new ones. Extremely easy to do. No tools needed
Other Parts Used:
Was this helpful?
Thank you for voting!
Old drip bowls could not be cleaned
0 of 1 people
found this instruction helpful.
-
Karl from Kempner, TX
- Really Easy
- Less than 15 mins
Replaced drip bowls.
Other Parts Used:
Was this helpful?
Thank you for voting!
burners were burnt
0 of 1 people
found this instruction helpful.
-
John from Brookhaven, PA
- Really Easy
- Less than 15 mins
replaced
Other Parts Used:
Was this helpful?
Thank you for voting!
old and rusted rings and pans
0 of 1 people
found this instruction helpful.
-
Bradley from Gate City, VA
- Really Easy
- Less than 15 mins
lift stove eyes and replace
Other Parts Used:
Was this helpful?
Thank you for voting!