- Home
- GDF520PSJ0SS
- Instructions
GDF520PSJ0SS General Electric Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ge Dishwasher was not filling with water
2 of 2 people
found this instruction helpful.
-
Robert from DANBURY, CT
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers
I replaced the Flood Switch Part Number: WD21X10519.
I found that be removing the bottom front cover under dishwasher door, there was a small black plastic clamp holding up the wiring cable. By disconnecting the clamp, it gave me a few more inching of wire inside the machine, which made disconnecting old flood switch easier. It also ... Read more help in installing the new flood switch. Then finally i reinstall the clamp cable under the machine to finish the job.
I found that be removing the bottom front cover under dishwasher door, there was a small black plastic clamp holding up the wiring cable. By disconnecting the clamp, it gave me a few more inching of wire inside the machine, which made disconnecting old flood switch easier. It also ... Read more help in installing the new flood switch. Then finally i reinstall the clamp cable under the machine to finish the job.
Read less
Was this helpful?
Thank you for voting!
The soap dispenser was broken os to save money I ordered one on-line
2 of 2 people
found this instruction helpful.
-
GARY from SOAP LAKE, WA
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
The repair instructions were great and the repair went well. The repair took less than an hour.
Thank you
Gary
Thank you
Gary
Was this helpful?
Thank you for voting!
dishes were not dry at end of completed wash cycle
2 of 2 people
found this instruction helpful.
-
louis from FRANKFORD, DE
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers
Followed the instructions on the video, it was pretty straight forward. It was helpful to know what to expect before hand like removing accumulated water in the drain before removing the flood switch so as not to have that water drain under the dishwasher. Knowing to have a nut driver with magnetic tip was helpful in removing and reinsert
... Read more
ing the screws. all in all it was pretty easy repair.
Read less
Was this helpful?
Thank you for voting!
Old rack had rusted and broken tines
2 of 2 people
found this instruction helpful.
-
Andrew from WINONA, MN
- Really Easy
- 15 - 30 mins
1. Take a picture of the old rack in the dishwasher! Just in case!
2. Remove rail channel end caps and place them on the tabletop on the correct side to make sure you put them back on the correct side.
3. Remove old rack.
4. Carefully snap off the water sprinkling unit. (carefully push down tabs so they don't break).
5 ... Read more . Using your picture as a reference (!) snap the water sprinkling unit on the new rack (it's easy).
6. Put the new rack back onto the rail channel and replace the end caps.
Done! Very easy installation ! Rack was not nearly as expensive as I anticipated and was delivered quickly. Note: You get the rack only. All ot the other parts are from the old unit.
2. Remove rail channel end caps and place them on the tabletop on the correct side to make sure you put them back on the correct side.
3. Remove old rack.
4. Carefully snap off the water sprinkling unit. (carefully push down tabs so they don't break).
5 ... Read more . Using your picture as a reference (!) snap the water sprinkling unit on the new rack (it's easy).
6. Put the new rack back onto the rail channel and replace the end caps.
Done! Very easy installation ! Rack was not nearly as expensive as I anticipated and was delivered quickly. Note: You get the rack only. All ot the other parts are from the old unit.
Read less
Was this helpful?
Thank you for voting!
Wife said Dishes were not Drying and leaving Spots !
2 of 2 people
found this instruction helpful.
-
Randal from TWIN FALLS, ID
- Really Easy
- Less than 15 mins
-
Pliers, Socket set
I tested Heating Element with Ohm Meter-Direct Short (if open it would have been bad and I would need to replace the element. Per the Website Troubleshooting for GE dishwasher, it said Heating Element (65%), Float Switch (32%), or Computer Board (only 3% Chance of it being board). So I ordered Float Switch. Later I noticed that the di
... Read more
shwasher would not change wash cycles from Heavy, Normal or Light.
So I turned the Circuit Breaker on and off. This fixed the Wash Cycle.
When the Float Switch Came in, I installed it in a few minutes watching the video on the GE Troubleshooting Page. Later when it was running I checked the operation and when I opened the door, the wife says seeing the steaming water, You fixed it, the Water is Hot now ! It was all about Hot Water, not the Heating Element at all ! And I think everything was fixed when I flipped the Circuit Breaker on and off and re-set the computer board. I think replacing the Float Switch was good maintenance, cause it was really dirty and needed to be replaced soon anyway. And it may have avoided my wife's next misdiagnosis with our dishwasher. This was 2 weeks ago, and all is well.
Sincerely,
Scott
So I turned the Circuit Breaker on and off. This fixed the Wash Cycle.
When the Float Switch Came in, I installed it in a few minutes watching the video on the GE Troubleshooting Page. Later when it was running I checked the operation and when I opened the door, the wife says seeing the steaming water, You fixed it, the Water is Hot now ! It was all about Hot Water, not the Heating Element at all ! And I think everything was fixed when I flipped the Circuit Breaker on and off and re-set the computer board. I think replacing the Float Switch was good maintenance, cause it was really dirty and needed to be replaced soon anyway. And it may have avoided my wife's next misdiagnosis with our dishwasher. This was 2 weeks ago, and all is well.
Sincerely,
Scott
Read less
Was this helpful?
Thank you for voting!
All 3 spray arms were stoped up.
3 of 5 people
found this instruction helpful.
-
Kenneth from SEBRING, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
Replaced all 3 spray arms in less than 10 minutes.The top one came in two pieces,the mounting bracket and the arm.Snap the bracket on the dishwasher first , then attach the arm to the bracket.
Other Parts Used:
Was this helpful?
Thank you for voting!
Racks were rusted.
2 of 2 people
found this instruction helpful.
-
Charles from MYRTLE BEACH, SC
- Very Easy
- Less than 15 mins
Ordered new parts, unpacked the shipping containers, removed old racks and inserted the new ones. piece of cake. Perfect fit and prompt service.
Other Parts Used:
Was this helpful?
Thank you for voting!
Original lower rack rusted
2 of 2 people
found this instruction helpful.
-
ANNE from LAKE PLACID, FL
- Really Easy
- Less than 15 mins
Pulled out old rack and replaced with new rack.
Was this helpful?
Thank you for voting!
Old lower rack was rusted
2 of 2 people
found this instruction helpful.
-
Russ from SPRING, TX
- Very Easy
- Less than 15 mins
Opened the box took the rack out and placed it in the dishwasher. Good as new.
Was this helpful?
Thank you for voting!
Drain pump quit draining
2 of 2 people
found this instruction helpful.
-
Mary from KINGSVILLE, MO
- Very Easy
- 15 - 30 mins
-
Screw drivers
My granddaughter's fian'ce actially replaced the pump.
He pulled the dishwasher out, tipped it over and quickly and easily replaced the pump.
I had already snapped the converter on to the pump so it was ready to hook up. I had read previous messages that this part had a converter.
After putting the washer back in place we ... Read more set it on a light wash to test it.
It went very well.
He pulled the dishwasher out, tipped it over and quickly and easily replaced the pump.
I had already snapped the converter on to the pump so it was ready to hook up. I had read previous messages that this part had a converter.
After putting the washer back in place we ... Read more set it on a light wash to test it.
It went very well.
Read less
Was this helpful?
Thank you for voting!
Lower dishwasher rack was rusted through
2 of 2 people
found this instruction helpful.
-
robert from WAUSAU, WI
- Easy
- 15 - 30 mins
The dishwasher rack was supposed to come with wheels it did not but I was able to use the existing wheels from the lower rack and snap them on was pretty easy
Was this helpful?
Thank you for voting!
No water getting to the dishwasher
2 of 2 people
found this instruction helpful.
-
William from JUNCTION CITY, OR
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Wrench set
Researched what others have posted about on Parts select. That really helped with the diagnosis! Took a chance on a $28 part. Repairman was going to charge $150 just to show up, then diagnose, leave for 2 months while waiting for the part, charge another $150 plus the part to fix…
Just had to pull out dishwasher far enough to take th ... Read more e water supply line off. Then the water inlet solenoid then 2 more screws and a 2 pronged plug reattach water supply then done! 15 minutes MAX!!!
Just had to pull out dishwasher far enough to take th ... Read more e water supply line off. Then the water inlet solenoid then 2 more screws and a 2 pronged plug reattach water supply then done! 15 minutes MAX!!!
Read less
Was this helpful?
Thank you for voting!
The upper arm in the dishwasher broke.
2 of 2 people
found this instruction helpful.
-
Cris from BAYFIELD, CO
- Really Easy
- 15 - 30 mins
Followed your instructions and was finished in 5 minutes.
Was this helpful?
Thank you for voting!
old nasty gasket needed to be replaced
3 of 5 people
found this instruction helpful.
-
Peter from N HOLLYWOOD, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
youtube youtube youtube!
No videos for the exact unit, but I got the gist from one video which included the trick of holding the door hinge springs in place with allen wrenches, while the door slid up and away for access to the gasket. I also had to pull the unit out from under the counter by about a foot. No need to disconnect anyth ... Read more ing. Good luck.
No videos for the exact unit, but I got the gist from one video which included the trick of holding the door hinge springs in place with allen wrenches, while the door slid up and away for access to the gasket. I also had to pull the unit out from under the counter by about a foot. No need to disconnect anyth ... Read more ing. Good luck.
Read less
Was this helpful?
Thank you for voting!
Drain pump needed replaced
2 of 3 people
found this instruction helpful.
-
Kim from BLACKFOOT, ID
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
The only directions that came with the new pump and filter, was how to replace the filter. I had to find a You Tube video to show me where the drain pump was located., and the way to get to it. I also had to figure out how the new pump was hooked up electrically, since the new pump did not work with the plug in on the machine.
Was this helpful?
Thank you for voting!