FGF337GBA Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Low amperage to gas safety valve no gas flow.
2 of 3 people
found this instruction helpful.
-
RONALD from VIRGINIA BCH, VA
- Very Easy
- 15 - 30 mins
-
Nutdriver, Wrench (Adjustable)
Disassembled inside of oven. Slid away from wall opened back replaced safety valve and igniter. Safety valve was good changed only because it was apart. Resemble and test sat. Kept old safety valve for emergency spare.
Was this helpful?
Thank you for voting!
oven wouldn't light consistently
2 of 3 people
found this instruction helpful.
-
BRADLEY from SHERIDAN, MI
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
remove oven floor and racks remove two self tapping screws unplug igniter replace be careful not to touch element plug in reverse order to reassemble
Was this helpful?
Thank you for voting!
Igniter gets hot but wouldn't ignite
2 of 3 people
found this instruction helpful.
-
Vajai from RICHMOND HILL, NY
- Very Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I did the repair with the instructions from parts select
It was very self explationatry
Thank you parts select
I saved at least $400.
It was very self explationatry
Thank you parts select
I saved at least $400.
Was this helpful?
Thank you for voting!
Lacking oven racks on used appliance
2 of 3 people
found this instruction helpful.
-
Katherine from Roanoke, VA
- Really Easy
- Less than 15 mins
Your website is great...easy and it literally took me no mote than 5 minutes to find what I needed and order...and received it VERY quickly. Must say I was dreading going to some parts house that we have in our town in bad area, and searching on dusty shelves for what I needed...am so glad I found you!!
Was this helpful?
Thank you for voting!
panel behind the handle of the oven door was cracked
2 of 3 people
found this instruction helpful.
-
William from Ivyland, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Once I recieved the new part it was easy to determine what two screws to remove to remove both the panel and the handle. I removed the two screws, slid the panel up and removed it. The new panel locked into place when slid down over the door and I replaced the sctews.
Was this helpful?
Thank you for voting!
Needed an additional rack
1 person
found this instruction helpful.
-
Gary from Darragh, PA
- Really Easy
- Less than 15 mins
Open the door and slide in the new rack.
Was this helpful?
Thank you for voting!
Code f10
1 person
found this instruction helpful.
-
bennie from san francisco, CA
- Really Easy
- Less than 15 mins
-
Nutdriver
Easy installation using a nut driver and a Phillip screwdriver.plug in harness connector and done.
Was this helpful?
Thank you for voting!
Old screws were damaged
1 person
found this instruction helpful.
-
Miriam from BROOKLYN, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Took out old screws and replaced with new
Was this helpful?
Thank you for voting!
The range clock wasn't keeping time, and the oven would shut off randomly in the middle of baking.
1 person
found this instruction helpful.
-
Andrew from San Juan Capistrano, CA
- Easy
- 15 - 30 mins
-
Screw drivers
Removed the metal cover on the back of the range by unscrewing the square-drive screws around the perimeter, left the center screw until the end to make it easier to hold for removal.
The control unit was held in with 4 Philips head screws, and connected by a single wire-to-board connector. Unplugged the connector and removed t ... Read more he screws and the control unit came right out.
The replacement unit doesn't come with a face plate, so I used a razor blade to carefully remove it from my old unit. The adhesive that held it on was still sticky so I was able to easily attach it to the new unit.
Then I just put everything back together in reverse order. One of the easiest appliance prepares I've done.
The control unit was held in with 4 Philips head screws, and connected by a single wire-to-board connector. Unplugged the connector and removed t ... Read more he screws and the control unit came right out.
The replacement unit doesn't come with a face plate, so I used a razor blade to carefully remove it from my old unit. The adhesive that held it on was still sticky so I was able to easily attach it to the new unit.
Then I just put everything back together in reverse order. One of the easiest appliance prepares I've done.
Read less
Was this helpful?
Thank you for voting!
No problem
1 person
found this instruction helpful.
-
Pamela from DETROIT, MI
- Very Easy
- Less than 15 mins
-
Screw drivers
My daughter did the installation and it was quick. She had no problem, and it's working great. She love it. She just use a philp screwdriver to take off the bolt then unplug the control adaptor. From the back then plug the new one in and that's it. Easy as 123
Was this helpful?
Thank you for voting!
replaced theoriginal power cord.
1 person
found this instruction helpful.
-
Blanca from Union City, NJ
- Really Easy
- 30 - 60 mins
-
Screw drivers
moved the stove forward and removed old cord by uncruing two small screw and on ploged the all and replaced with the new one.
Was this helpful?
Thank you for voting!
Gas oven stopped working. I read that it probably was the igniter. Bought a new one to ins
1 person
found this instruction helpful.
-
Dennis from WEST ROXBURY, MA
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
YouTube video I used was for a newer version of the same model stove. Door did not have latches to remove it. It was fairly easy getting to the old igniter but a bit of a struggle getting to unplug it, as the connector was behind a small metal shield in the bottom left corner of the oven. Because I couldn’t remove the oven door, it made i
... Read more
t more difficult to undo the screw holding it in. I finally did, and from that point it went smoothly. I was worried that I was going to access it from the back, but I didn’t need to. I installed the new one, turned gas back on, moved the stove back to position, and turned on the oven. Very happy to have succeeded, adding a few more years to the stove and saving money for the installation of the igniter.
Read less
Was this helpful?
Thank you for voting!
Igniter did not light.
1 of 2 people
found this instruction helpful.
-
marcus from hot springs, AR
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
The electric was the next step it worked.
Was this helpful?
Thank you for voting!
my housekeeper broke the stove knob
1 of 2 people
found this instruction helpful.
-
karen from brooklyn, NY
- Really Easy
- Less than 15 mins
I was so happy to get the part before Thanksgiving. While I was opening the box I was telling to concierge how fast I got the part. A neighbor overheard me & asked who I used & I tor off the top of the receipt so he could use your company. He said all his knobs are held together w. rubberbands.
The best part was the help finding the ... Read more serial #. I would have never found it on my own.
Thanks, Karen T
The best part was the help finding the ... Read more serial #. I would have never found it on my own.
Thanks, Karen T
Read less
Was this helpful?
Thank you for voting!
The top burner knobs for this range had deformed over time and were discontinued.
1 of 2 people
found this instruction helpful.
-
David from Naperville, IL
- Really Easy
- Less than 15 mins
Through an extensive web search of parts suppliers, I discovered a top burner knob in production that had the same shaft measurements as the original discontinued model. Once the ordered replacements arrived, it was a simple matter of removal and replacement.
Was this helpful?
Thank you for voting!