EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FGF337GBA Frigidaire Range - Instructions

All Instructions for the FGF337GBA
46 - 60 of 133

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No problem, just needed to convert to LP gas.
5 of 10 people found this instruction helpful.
  • Edward from Janesville, WI
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Wrench set
After looking over the installation instructions I was confident that I could perform this on my own, However, changing the burner orifices was a bit tricky. Getting the original ones out worked well, they stayed in the nut driver when it was lifted. One of the new ones fell out when inserting it. Thankfully it fell all the way down a nd I could retrieve it. A small piece of tape was needed to keep it in the driver. The rest of the install went per instructions.
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 people found this instruction helpful.
  • Ronald from Ozone Park, NY
  • Easy
  • 1- 2 hours
  • Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass.
It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
Plastic mounting brackets on unit broke off
3 of 4 people found this instruction helpful.
  • Karl from HIGHWOOD, IL
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I followed the instructions given pretty much, however none of them mentioned one important point.To remove the cover plate, do NOT try to pry it away from the unit. It will crack. Fortunately I caught it in time.I then started in another corner by inserting a razor knife between the face plate and unit and sliding it around all four sid es. There was enough goo left on the plate to enable me to affix it to the new unit.
Was this helpful?
Thank you for voting!
The Cap On The Range Door Broke
3 of 4 people found this instruction helpful.
  • Chuck from Toms River, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
There were only 2 screws that held the door handle & cap in place, removed screws & handle to get cap pieces off. Ordered new cap, - lost screws - cap delivered - no screws had to order screws, damn! They're expensive too !! Got screws, installed handle & cap, now wife is happy again!
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 people found this instruction helpful.
  • Marilyn from Clearwater, FL
  • Easy
  • Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience with those in need of you services. Thanks. Marilyn Kasson
Was this helpful?
Thank you for voting!
Oven stopped heating all together when turned on.
2 of 2 people found this instruction helpful.
  • Jalen from GREENWOOD, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
removed racking, flame cover, and wire plug in cover by pulling out racking, removing one nut, and one screw for the cover. Removed two small bolts to remove igniter, and then unplugged from two locations. Did the same in reverse for install.
Was this helpful?
Thank you for voting!
old knob fell off
2 of 2 people found this instruction helpful.
  • Gloria from DALLAS, TX
  • Very Easy
  • Less than 15 mins
order anew knob, put it on
Was this helpful?
Thank you for voting!
Igniter wouldn't glow and obviously no heat
2 of 2 people found this instruction helpful.
  • David from JERSEY CITY, NJ
  • Very Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Partselect always have their install video with the parts they sell so it was easy. I know contractors must not be happy with people like partselect and YouTube with all the instructional videos they supply us with. Keep up the great work partselect.
Was this helpful?
Thank you for voting!
Igniter failed to ignite propane
2 of 2 people found this instruction helpful.
  • Philip from FREDERICKSBRG, TX
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Pulled out broiler drawer, removed 3 bolts, plugged in new igniter. Only issue was one of the tiny bolts stripped, so now only have 2 holding it in place.
Was this helpful?
Thank you for voting!
Stove was dropped and had broken, bent frame and adjuster feet
2 of 2 people found this instruction helpful.
  • Paul from PORT ORANGE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
New ones fit perfectly. Take a minute to bend the frame straight. Then and I used oversize screws on the replacement parts as the drop had stripped out the screw holes of the frame.
Was this helpful?
Thank you for voting!
burner ingnighter would not lite burner
30 of 86 people found this instruction helpful.
  • Wayne from Palestine, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy ju st the spark module for the burner.
Was this helpful?
Thank you for voting!
Oven would not operate, & down button didn’t work
2 of 2 people found this instruction helpful.
  • Larry from ELDRIDGE, IA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
6 screws to remove upper back panel, 4 screws to remove control. Unplug wire harness. Carefully remove adhesive backed front display cover & press to new control, & reverse process to reinstall. Exact original replacement part, quick delivery! replacement
Was this helpful?
Thank you for voting!
Oven would not ignite
2 of 2 people found this instruction helpful.
  • Joe from REAGAN, TN
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I didn’t follow the instructions for the igniter
I simply jerked hard on the bottom drawer & it cam out onto the floor . Pulled range out & changed the oven sensor with a nut driver.
Same for the controller, 5 screws with a nut driver to remove back plate & 4 screws holding the controller in place , used the old face plate and it was easy as pie
Was this helpful?
Thank you for voting!
Clock or oven didn't work
2 of 2 people found this instruction helpful.
  • Marjorie from WILLARDS, MD
  • Really Easy
  • 30 - 60 mins
  • Socket set
Repair went well. I went on You Tube and was able to watch what to do. That was better than reading instructions.
Was this helpful?
Thank you for voting!
The igniter won't work
2 of 2 people found this instruction helpful.
  • Bobby from FORT DEFIANCE, AZ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
On the front left burner would not ignite, after the installation of the new one, same problem, new one didn't fix.. I guess it's something with the electric igniter
Was this helpful?
Thank you for voting!
All Instructions for the FGF337GBA
46 - 60 of 133