Home
AFC1
Instructions

AFC1 - Instructions

All Instructions for the AFC1

The splashguard on the disposall had deteriorated leaving a silver-dollar-sized hole.

1 of 3 people found this instruction helpful.

R M from Bloomfield, NE
Really Easy
Less than 15 mins

The repair was simple. I removed the old splash guard and placed the new splash guard in. It took less than a minute. Absolutely no tools required.

Quick shipping too. I had the replacement part in 2 days.

Was this helpful?

The Splash Guard had begun to disintgrate. One from Lowes didn't fit correctly. The Stopper got thrown away by accident during the holidays.

2 of 6 people found this instruction helpful.

Susan from Crossville, TN
Really Easy
Less than 15 mins

New Splash Guard fits perfectly and allows food to go into the disposer more easily. Couldn't be happier. ordered items one day and were here the next at no extra cost.

Other Parts Used:

Garbage Disposal Drain Stopper – Part Number: WC11X20163

Garbage Disposal Drain Stopper

Garbage Disposal Drain Stopper – Part Number: WC11X20163

Garbage Disposal Drain Stopper

Was this helpful?

splash guard on disposer worn out

0 of 1 people found this instruction helpful.

Scott from Evansville, WI
Really Easy
Less than 15 mins

pulled the old one out and pushed the new one in place.

Was this helpful?

splash guard was worn out

0 of 1 people found this instruction helpful.

Warren from Sanford, NC
Really Easy
Less than 15 mins

Received the new splash guard within 3 days, took it out of the package, pulled out the old one and inserted the new one. No tools, it took about 1 minute. Very easy!

Was this helpful?

Replace water filter

0 of 1 people found this instruction helpful.

Brenda from Lykens, PA
Really Easy
Less than 15 mins

Very simple to replace

Was this helpful?

Old splash guard was worn out.

0 of 1 people found this instruction helpful.

Pat from Elkin, NC
Really Easy
Less than 15 mins

Simply took old one out and snapped new one in place.

Was this helpful?

you have to turn it off and on to run.

0 of 1 people found this instruction helpful.

chris from woodland hills, CA
Really Easy
Less than 15 mins
Nutdriver

Just like the video showed me.It still does not work. Have to turn it off and on to make it start up.I also replaced thermostat in freezer. Does not work.

Was this helpful?

Heard a five second buzzing sound repeated 4 or 5 times per cycle coming from rear lower left compressor side.

Burton from Pecatonica, IL
Easy
15 - 30 mins
Nutdriver

Removed the six screws holding the bottom access plate found at the rear of the refrigerator. This gives you easy access to the run capacitor that has a retaining clip. Remove the wire clip and pull out the capacitor (it has two quick disconnect terminals). Reverse the process using the new run capacitor to complete the repair.

Was this helpful?

Frig not cooling.

Adam from Randolph, ME
Really Easy
Less than 15 mins
Pliers

After plugging in the new relay to no avail. I replaced the thermostat. That fixed the problem.

Was this helpful?

Refrigerator stop cooling

Ba from Van Nuys, CA
Really Easy
Less than 15 mins

I did remove the run capacitor of the starthing kit of compressor and another one new. It work fine.

Was this helpful?

Part was worn out

ALICE J from El Paso, TX
Really Easy
Less than 15 mins

Simply pressed the splash guard in to place

Was this helpful?

bottom of spash guard worn away

Lowell from Wheelersburg, OH
Really Easy
Less than 15 mins

Pulled old one out. It goes into basket from top of sink.Placed the new one in.

Was this helpful?

The splash guard had deteriorated and kept falling into the disposall.

ELENO from CHINO HILLS, CA
Really Easy
Less than 15 mins

The repair was extremely simple, it took less than a minute to complete. It was a perfect fit and it significantly reduced and dampened the noise once it was installed. The shipping was super fast as it arrived within 48 hours of my placing to order.

Was this helpful?

The rubber got old and weak. The splash guard kept falling into the disposer when you tryed to push food down.

Ivan from Waggaman, LA
Really Easy
Less than 15 mins

Just like one of the other guys who had this problem, I had purchased a "universal" replacement from ACE that did not fit my appliance. When I got your replacement it took me just seconds to pop out the old one and push in the new one. It works perfectly! Thanks

Was this helpful?

replace garbage disposal guard

Thomas from Irvine, CA
Really Easy
Less than 15 mins

simply replaced in the sink cavity!

Was this helpful?

All Instructions for the AFC1