AFC1 - Instructions

I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck le ... Read more t's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!

The splash guard for the disposer was deteriorating and kept falling into the disposer and getting chewed up making it even less reliable. I purchased two different 'universal' splash guards at the hardware store. Neither of them fit. I finally crawled under the sink with my eyeglasses and a flash light to find the model number. I se ... Read more arched for the model number on part select and received veery quickly. I just popped it in (less than a minute) and now everything is wonderful. Don't buy a new disposer (my wife wanted me to) buy the replacement part that is giving you trouble at PartSelect!

changed the starter connected to the compressor

Purchased new one and just put into the hole.

What a snap just push it in and all is OK. Tried the generic one from Lowes didn,t work. This was great and cheap including shiping charge.

i had used your web site before and i read several problems that your readers had. i went to the back of the unit, removed the bottom cover and right there the i found the run capacitor and i chaged it. since i had only ordered this part to save money i went back and ordered the Start Device which when i took it off it was completely burn ... Read more ed. the replacement part came labeled with 2 different compressor #, so i picked the one that i had and unpluged each wire. the part may differ from the one that it's in the unit but it worked when i pluged everything back on. it also helps to take a picture of everything before removing the wires in case you have to leave it and come back later. i hope to use this refrigerator another 10 years. thank you all for your help.

Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached ... Read more incorrectly previously) but all is well with no leaks. Dishwasher hose needed to be re-attached after hopper mounted and locked in position.

Removed old splash guard by pulling it up and out of the disposer then pressed the new guard in place. It was a perfect fit.

It was very difficult to find a splash guard to fit. Have tried at major stores LOWES and small Hardware stores. The people who worked on your Phone line helped me to choose the correct splashguard even though the model number did not match. I think the diposal was old. thanks for your help. It fit perfectly.

The repaire was so easy that it is hardly can qualify as a repair. I just pulled the old splash guard and put in the new. Thirty seconds and garbage disposer looks like brand new!

Removed used one and replaced with new one. Perfect fit no tools required. Suggestion: Always buy orgional manufacture's parts when possible. Then you know they will fit and work properly.

My order arrived in the mail in 2 days, I popped it in and it was a perfect fit. AAHH, what a relief not to have it fall in constantly!

Got a new one! Order Monday, delivered Tuesday! Fit perfectly!!

****Make are you order Capacitor & Starter relay too (we ordered separtely so had to pay shipping twice)**** Super easy just open access panel on back near compressor and remove retention clip with fingers, remove & replace both capacitor & starter, put clip and acce ... Read more ss panel back on, plug in and allow 8 hours to cool! Works like new again! Hope it goes another 10 years

Simply removed the old splash guard which was partially destroyed and inserted the new one.