8419 - Instructions

Instant repairman suggested the problem and I'd ordered the parts that was suggested thru part select and shipping was fast! I don't have any knowledge repairing appliances, but through partselect made it easy for me. I went online through youtube to see and to have some idea how to fix the problem. It was shown to me step by step and the ... Read more safety procedure how to fix the problem. The video that was shown to me was a whirlpool older model but the diagram are similar. Able to fix my dryer in less than 30 minutes and it's working fine now and saves me a couple hundred dollars. Thanks partselect! I am one of your very satisfied customer and will do business in the future again.

I followed the video posted on partselect.com of how to fix dryer belt. And only took 20 minutes to fix the dryer.Proud of myself! and save over $160 compared to ask a sears technician come to home to help.

Belt was sent and delivered very quickly. I was able to follow directions that came in the package. Thanks so much for efficient handling.

Watched video first made the job go easy and fast. Video was repair class 101. Go for it. Parts arrived 2 days after order was placed.

I followed the instructions in your video, just be careful

with the sharp edges when installing belt..Very easy to

install....Thanks

Found PartSelect on line and looked through the website to find the part. While there, found the how-to video and watched the how-to steps. The video was the most important step to this repair project. When the part arrived, the replacement went as smoothly as shown on the video. Thanks for making this a smooth and inexpensive repair.

had to put new belt on...watched video first when belt came it was easy to followed it directions

Using screwdriver, pry up top lid from front. I used bungee cord to hold it up and out of the way. There is one screw towards the top holding the front panel to each side panel. Remove screws and pry open. Prop up right side panel so wires at top are protected.

Verify that the belt is broken. Order new belt. Follow instruction ... Read more s on package to put new belt on -- pretty easy. If it's not the belt, consider whether your skills are good enough for further diagnosis, or whether you need to call a pro.

Reverse paragraph above to put dryer back together. Catch up on backed-up laundry.

I ordered the parts for my elderly mother's dryer, printed all the DIY instructions, plus the instructions that came with the belt. And wha-laa, my brother changed it out in 30 mins. tops, we were both pleased she didn't have to buy a new one!!! The other stories really are true! I now, am also another impressed customer, great service ... Read more , advice, quick, and accurate.

The repair was simple and a good diagram accompanied the belt. The best way to do this is to make sure the tensioner is in place with the spring attached on both ends. Replace the drum with the belt over it. Lay on the floor and with your left had grab the bottom of the belt, run it under the tensioner, then loop it over and onto the m ... Read more otor pulley. Hand rotate the drum to assure that all is lined up, swing up the front of the dryer, then pull the top down and snap it all together, start the dryer, grab a beer and watch your favorite sports program!

I researched the part and schematics on the model I was working on.I then watched the instructional video.The part I ordered arrived and folling the instructions , I installed it that afternoon and put everything back together.I plugged it in and turned it on.It worked like a charm.Thank You very much.Sincerely,Jay Twilla

The top has clips at each front corner,and two screws in the lint filter door that need to be removed, and the top can be popped up. Now you can see the belt,or not if its broken.The lower kick panel under the door is removed next, by gently prying off the panel.Unhook the springs to lift the door.The door is removed with 4 screws in each ... Read more corner of the panel. I propped the drum up with wood and removed the door,installed the belt with the instructions included with the belt. Reassemble in reverse order.

Repair was easy popped the top off and removed the front then the drum route belt around drum motor and idler pulley and reassemble

Use putty knife to release top catches and lift top. remove 2 screws holding front panel and remove panel. Slide drum slightly forward to get new belt around drum, reseat drum and set tensioner against belt. Replace front panel. Close top. Done.

i watched the video supplied with part on web site it was a great help.