65021 - Parts

This genuine carburetor gasket plate is an original replacement part sourced directly from the manufacturer for use in snowblowers by MTD, Yard Machines, Troy-Bilt, Yard Man, and Cub Cadet. Positioned between the carburetor and the choke control bracket, this component is essential for creating a secure, airtight seal that ensures proper ...Read moreengine performance. Made from a thin, durable material, the gasket plate may require replacement if it becomes damaged or worn. This item is sold individually and may require a socket set and pliers for installation. For best results, consult your equipment’s service manual and perform the repair with the engine off and cool.

This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually. Th...Read moreis part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation. Customers rate this repair as Easy.

This high quality replacement v-belt is an authentic manufacturer sourced replacement part. It is specially produced for use with Husqvarna and Poulan walk-behind lawn mowers. This is the the main belt that rotates the blades. Over time belts tend to wear out, stretch or break eventually requiring replacement. When replacing this belt, ma...Read moreke sure to clean off the drive pulleys to prolong the life of the new belt. This part is made from durable rubber and it is sold individually.

A choke control bracket is designed to mount a choke lever/knob, allowing you to open or close the choke whenever necessary. This bracket is designed for use with snowblowers and is made of high-quality metal and features a built-in choke lever and connects to a push rod which actuates the choke on the carburetor. If you find that you hav...Read moree little-to-no control over the choke, or that the choke engages and/or disengages at random, this bracket may be damaged or worn and need to be replaced. To replace this bracket, you will need a screwdriver and wrench to access the inside of the carburetor housing, disconnect and replace the bracket, and reassemble the entire housing. This bracket is sold as an individual and is a genuine OEM part.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

Keep your equipment powered and ready with this authentic OEM 12V battery charger, specifically designed for use with Husqvarna and Poulan lawn mowers. Sourced directly from the original manufacturer, this charger ensures reliable performance and compatibility—unlike aftermarket alternatives. Its primary function is to recharge the bat...Read moretery that powers your mower, helping maintain consistent starting power and overall functionality. Please note that using this charger with a weak or defective battery can cause damage to the charger itself. If you're unsure whether the issue lies with the battery or the charger, it's recommended to have the battery tested at a certified service center before replacing any components. Each order includes one (1) 12V charger. This is a must-have replacement part for maintaining your mower’s electrical system and ensuring dependable operation throughout the season.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This lightbulb is supplied by the original manufacturer and intended for use in lawn tractors and riding mowers with a 12-volt system. It is positioned on the front of the equipment as part of the equipment lighting system. The lightbulb illuminates the area allowing for improved visibility when working in low-light conditions. The lightb...Read moreulb can fail due to various reasons, such as burnout, electrical issues, or physical damage. Once the lightbulb stops functioning, visibility will be reduced which makes it difficult to safely operate the equipment. Before you begin the repair, disconnect your equipment from the power source to avoid electrical hazards. Remove the bulb housing cover, and carefully unscrew the old bulb. Thread the new bulb into the housing and ensure that it is securely seated. Finally, reattach the housing cover, reconnect the power supply, and test the new bulb. Note that this bulb is part of a dual usage system, therefore ensure that you order at least two as each bulb is sold individually.

This part is an OEM from MTD for use with Snow Blowers and Engines. The Choke push rod connects the choke thermostat lever to the carburetor choke plate lever to control airflow through the carburetor during engine start-up. The most common reason for replacing the choke link is if the engine will not run smoothly or will not start at all...Read more. This part is sold individually. The tools that you will need to replace the choke push rod is a 5/16 inch socket or nut driver.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This deflector shield torsion spring is an original part from Craftsman for lawn mowers, rotary mowers, and gas walk behind lawn mowers. This part connects to the hinge rod and allows the shield to hinge down and up. You will need pliers to replace this part. This deflector shield torsion spring is made of metal and sold individually.