All Installation Instructions for 65021

My self-propelled lawnmower did not function. The front wheel assist did not work.

15 of 27 people found this instruction helpful.

Russ from ALTENBURG, MO
Very Easy
Less than 15 mins
Socket set

I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socke ... Read more

Read less

Was this helpful?

Cable was broke.

6 of 7 people found this instruction helpful.

James from ASHTABULA, OH
Really Easy
15 - 30 mins
Pliers

Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.

Was this helpful?

Carburetor rebuild

3 of 6 people found this instruction helpful.

Jason from PEABODY, MA
Very Difficult
More than 2 hours

I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- [email protected]

Was this helpful?

Front drive wheel locked up, causing the mower to not be able to be pushed.

4 of 12 people found this instruction helpful.

Walter from EVERETT, WA
Easy
Less than 15 mins
Socket set

Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.

Was this helpful?

65021 - Instructions