65021 - Parts

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.

The Push Nut is a black, metal nut, which can be installed with pliers and a hammer. It's used to secure parts in place in various locations on a variety of equipment. If damaged will not longer hold in place. Installation is rated as "Easy", but it will depend on the parts your are securing and the equipment you are using. Consult your m...Read moreake, model and diagrams to ensure this is the correct part. The part is sold individually.

This is a genuine manufacturer approved item. It is supplied directly from original equipment manufacturer for use with walk-behind lawn mowers. It allows unit to be mobile for easy movement/transportation. This wheel is made out of plastic and it is sold individually. Please note, the axle bolt and the washer that secures this wheel are sold separately. A wrench will be needed to replace this wheel.

This is a genuine Husqvarna part for use with Husqvarna, Poulan and Jonsered Lawn Mowers. The height adjuster moves the lawn mower wheel up or down to adjust the lawn mower deck to the desired cutting height. The most common reason for replacing the height adjuster plate is if it is damaged. This part is sold individually. Here is a list ...Read moreof tools that are needed to install the left front wheel adjuster are a flat-head screwdriver, 9/16" nut driver, and a 3/8" nut driver.

This key a genuine manufacturer-sourced replacement part for use with outdoor equipment. They key is inserted into the ignition to power on the equipment. It is made of durable plastic and is approximately 1 inch wide and 2.25 inches long. You will need a replacement key if yours is broken or lost. Each key is sold individually.

This fuel tank assembly is a genuine replacement part supplied straight from the manufacturer. It is commonly used in snowblowers. This tank is designed to contain the fuel needed to power the machine. It should be replaced if it is damaged or begins to leak. Before replacing this part, first be sure to empty the fuel tank.

It is a genuine OEM supplied item which is made for walk-behind lawn mowers. This is a high-quality replacement for a missing or a damaged pinion gear that helps to drive the mower's wheel. Unfortunately, over time due to friction, the teeth on the gear may wear out. If this happens it will no longer engage the wheel and the mower will no...Read moret move. To ensure the exact location and the correct installation of the new part, refer to the diagrams of your specific model. Note, one durable metal pinion is included. You will need a wrench set and pliers to remove the old pinion and secure the new one.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers to install. If broken, damaged or worn, there may be a problem with the part it is securing and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part.

The fuel tank nipple, also referred to as a fitting, connects the fuel tank of your lawn equipment to its engine fuel line, allowing fuel to reach the engine. If you observe fuel leaks or a loose connection, the nipple may be damaged and requires replacement. When removing the old fuel tank nipple, ensure the tank is empty and the engine ...Read moreis turned off. Use a wrench or pliers to detach the nipple. This high-quality OEM replacement part is sold individually.

This part has been sourced from the original manufacturer and is intended to be used with walk-behind lawnmowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The metal pawl is used to secure the pinion to the transmission axle to allow the two parts to rotate in unison. This drive pawl is priced as a single item, please note two may be needed.