65021 - Parts

This replacement item is supplied by the original manufacturer for use with Husqvarna and Poulan lawn and garden equipment. It is one of the special bolts utilized to secure components together, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This choke knob is an authentic OEM replacement part designed for snowblowers. It is a small plastic knob, measuring 2 inches in diameter. It restricts the airflow to the engine which enriches the fuel mixture and makes it easier to start the snowblower when the engine is cold. Depending on your exact model you can find the choke knob eit...Read moreher near the engine or on the control panel. Failure of the choke knob can occur due to wear, damage, or clogging. If the choke knob is damaged or worn down, you will have difficulties starting your snowblower, the engine may stall, and you will notice decreased performance from the snowblower. To remove the faulty choke knob, remove the clips or screws that hold it in place, and pull it off the shaft. Align the new choke knob with the shaft and secure it in place with the fasteners. Run your equipment and test the new choke knob to confirm that the choke can engage and disengage appropriately.

This is a genuine replacement part sourced from the original manufacturer for use with lawn mowers made by Husqvarna, Poulan, and Jonsered. The key start with zone control cable attaches to the control bar on the handle and helps to start the motor. A set of pliers may be necessary during the installation of this part. It is made of plast...Read moreic and will need to be replaced if it breaks. Keep in mind that this part is priced individually.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged ev...Read moreentually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair.

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

This replacement part is supplied directly from the original equipment manufacturer. It is specially designed for walk-behind lawn mowers. The bracket is an important component which helps to provide support for the deflector. This is an identical replacement for a damaged or a missing part that was installed on a new unit. Keep in mind t...Read morehis high-quality hinge bracket assembly is made of durable metal and is sold individually. Make sure to refer to the diagrams of your model for the correct installation of the new part. Note, the hardware to secure it is sold separately.

This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hex washer screw. Ke...Read moreep in mind this high-quality part is made of durable metal and is sold individually.

This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may ...Read morealso find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.

It is an authentic OEM sourced replacement part that is specially designed for use with lawn mowers. This is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct application. This screw is made high-quality metal and it is sold individually.

This screw is a high quality hardware that is specially manufactured for use on MTD and Yard Machines lawn and garden equipment. It is an authentic part that has multiple uses depending on the equipment. Make sure to check appropriate diagrams for correct location and applications of this screw. Please note, one hex head screw is included per order that will require a wrench to install or remove it.