EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3VET2 Whirlpool Refrigerator - Instructions

All Instructions for the 3VET2
61 - 75 of 401

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken glass shelf for top of crisper
5 of 6 people found this instruction helpful.
  • Tom from SHEBOYGAN, WI
  • Very Easy
  • Less than 15 mins
Part fit perfectly glass dropped right in
Was this helpful?
Thank you for voting!
freezer constantly covered with ice not defrosting
7 of 12 people found this instruction helpful.
  • michael from millstone, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I opened rear wall inside freezer (two screws) cut the wires on old thermostat and removed it. Then I attatched the new thermostat to the existing wires using wire nuts and electrical tape and slid it onto the copper tubing. Re-installed the rear wall. Freezer works like a charm and the refridgerator is also colder. Job completed in twent y minutes and Tim Allen has nothing on me. Mike Milne
Was this helpful?
Thank you for voting!
Broken drawer
5 of 6 people found this instruction helpful.
  • Linda from Mabscott, WV
  • Really Easy
  • Less than 15 mins
I ordered the drawer which arrived 3 days later and I just took out the old one removed the white handle cover placed it on the new drawer and put it back in quick, easy done.
Was this helpful?
Thank you for voting!
The door light socket was broken and hanging down
6 of 9 people found this instruction helpful.
  • David from Roanoke, VA
  • Really Easy
  • Less than 15 mins
The refrigerator light in our Kenmore fridge has been flaky for a number of years. The slightest bump would knock it out of the hole it fits into leaving the bulb dangling. Usually since we were used to it, we could avoid bumping it so it was no real problem, but a recent visitor bumped it and it once again was hanging. I decided this tim e, to take a serious look at it and fix the problem for real. I had options, duct tape, hot glue gun, goop...or a new part! A quick search on the internet, and I found www.PartSelect.com I entered my model # , quickly found the correct part number. The part came 1 1/2 days after I ordered it. The repair was very simple, I unplugged the fridge, removed the wires from the spade connectors on the old light socket, and attached them to the new socket. I then pushed the socket into the hole, and with new spring clips, it snapped snuggly into place. The socket came with extra wire connectors which I didn't need, the socket fits multiple brands of appliances. It also came with a bulb protector, but that wasn't needed for my fridge either. I was very pleased with the speed and ease of the repair. No more dangling light bulbs!
Was this helpful?
Thank you for voting!
Cracked crisper
5 of 6 people found this instruction helpful.
  • Ronald from Pomona, CA
  • Really Easy
  • Less than 15 mins
Took out the cracked one, and replace with the new one. Fitted perfectly.
Was this helpful?
Thank you for voting!
Light in my refrigerator didn't work.
5 of 7 people found this instruction helpful.
  • Joseph from Byron Center, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
At first I went to a local part supplier and they didn't have it in stock but could order it for me for $55.00 plus $10.00 to ship it. I told them I would have to think about it. I went home and got on the computer and found your web site and was I shocked when I saw the same part listed for $6.98 and $7.00 to ship it. You guys saved m e $50.00. The part arrived in two day and took 5 min. to install. I now have light in my refrigerator. Thank you.
Was this helpful?
Thank you for voting!
Lost shelf support bracket
4 of 4 people found this instruction helpful.
  • DAVID from LAFAYETTE, LA
  • Really Easy
  • Less than 15 mins
Ordered shelf support stud kit. Product was promptly delivered, and contained the parts as shown on website. Took longer to open the package than to replace the missing shelf support bracket. No problems. Would order from them again.
Was this helpful?
Thank you for voting!
Crisper Drawer Rail Broken
4 of 4 people found this instruction helpful.
  • Tom from DESTIN, FL
  • Really Easy
  • 15 - 30 mins
Removed crisper drawers removed glass shelf installed Rail.
Replaced glass shelf then installed crisper drawers.
Was this helpful?
Thank you for voting!
Refrigerator light would not stay on
4 of 4 people found this instruction helpful.
  • Dave from Manchester Center, VT
  • Easy
  • 15 - 30 mins
  • Nutdriver, Socket set
Removed the 2 screws holding the light bulb shield, then the 4 uolding the metal panel. Unplugged the olw door switch and replaced.
reassembled the pieces.
Was this helpful?
Thank you for voting!
The drawer cracked and broke.
4 of 4 people found this instruction helpful.
  • Leonard from MASTIC BEACH, NY
  • Very Easy
  • Less than 15 mins
Just slid the drawer into the runners and finished.
Was this helpful?
Thank you for voting!
Cracked Meat Keeper and Crisper
5 of 7 people found this instruction helpful.
  • Theodore from Simi Valley, CA
  • Easy
  • Less than 15 mins
Replaced drawers.
Was this helpful?
Thank you for voting!
Gasket wouldn’t hold door shut.
4 of 4 people found this instruction helpful.
  • Patti from GARNEILL, MT
  • Difficult
  • 1- 2 hours
NO DIRECTIONS CAME WITH GASKET! Project failure as gasket tore on a corner. For the price of this gasket, I was DISAPPOINTED. Door is being held shut with a childproof strap.
Was this helpful?
Thank you for voting!
Freezer froze and refrigerator wet
5 of 8 people found this instruction helpful.
  • Patricia from Marengo, OH
  • Easy
  • 1- 2 hours
  • Screw drivers, Socket set
First took all frozen food out and than undid the screws that held back on--than cut the wires that held the piece and replaced it but also found that the plug was frozen so we thawed that out, that is why it took longer. Used air compressor to blow air and it broke it free and than we finished and put the food back after it got cold. So far it is working find and to beat all we received our part the next day so my husband could fix it that weekend--Thank you for the quick respond-
Patricia in Marengo Ohio
Was this helpful?
Thank you for voting!
Lights not working some times
4 of 5 people found this instruction helpful.
  • Harry from COLUMBIA STA, OH
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Removed old switch and installed new - but did not solve problem
Was this helpful?
Thank you for voting!
I broke the plastic handle on my brand new refrigerator
4 of 5 people found this instruction helpful.
  • Elmer from Annapolis, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed the two screws on top, then slide the trim cover at the bottom of the handle down and removed the third screw to remove the handle.

New handle goes in with two top screws first, then third screw at tem bottom of the handle. Don't forget to slide the trim piece back on to cover the third screw...
Was this helpful?
Thank you for voting!
All Instructions for the 3VET2
61 - 75 of 401