3976 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
a fan blade broken causing it to make a loud noise
3 of 5 people
found this instruction helpful.
-
Marnie from Denver, CO
- Really Easy
- Less than 15 mins
-
Pliers
we took off the old one and replaced it.
Was this helpful?
Thank you for voting!
Door would drop down when opened
2 of 2 people
found this instruction helpful.
-
Donald from Lauderhill, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
Removed the door by removing the top hinge and lifting it off the broken bottom hinge/cam assembly. Removed the broken hinge/cam assembly found out why the cam broke the doorstop was bent so I had to order the doorstop also. The ordering of the parts was so easy. They shipped them on Monday and they arrived the next day. I will use Parts
... Read more
Select again
Read less
Was this helpful?
Thank you for voting!
Closing cam disintegrated
2 of 2 people
found this instruction helpful.
-
Larry from Renton, WA
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Removed everything from the refrigerator door. Removed the screw holding the cover over the top hinge. Removed the two (8mm) bolts holding the top hinge to the refrigator. Removed the door. Removed the plastic grill/cover and the two (8mm) bolts from the lower hinge assembly. Installed the new hinge assembly. Replaced the closing c
... Read more
am (included in the hinge assembly kit) on the bottom of the door. Put the door back on the lower hinge. Installed the upper hinge. Adjusted the door and tightened the bolts on the upper hinge, and replaced the hinge cover. Done!
Read less
Was this helpful?
Thank you for voting!
freezer stoped freezing
2 of 2 people
found this instruction helpful.
-
paul from ENDICOTT, NY
- Very Easy
- 15 - 30 mins
-
Pliers, Screw drivers
my freezer quit freezing, it would freeze for one day, thaw the next, so I went online, found PARTS SELECT, LOOKED UP MY MODEL #, come to find out it needed three parts to keep my freezer to freeze, first part was a thermistor a small PART took me longer to remove all the covers, and shelving, PULLED THE
... Read more
OLD OUT, CUT THE WIERS TO SIZE, AND REINSTALLED, IT WELL! THAT WASN'T ENOUGH THE FREEZER STILL DIDN'T FREEZE IT THOUT IT WAS A COOL WORMING OVEN, HAD TO INSTALL THE THERMISTOR I, SO I DID, TEN MIN, NOW I THOUGHT THAT WAS IT BECAUSE IT STAYED FROZEN FOR A WEAK, HAVE YOU EVER EATEN SOUPY ICE CREAM? SO BACK TO PARTS SELECT, THIS TIME I BOUGHT ONE MORE PT, THE RUN CAPACITOR, FIVE MIN, THAT/S ALL IT TOOK TO INSTALL. I DID NOT KNOW AT THE TIME YOU NEED THE THREE OF THEM TO RUN THE FREEZER ONE TO KEEP THE TEMP., ONE TO KEEP THE FAN RUNNING THE WAY IT SHOULD, AND THE THIRD TO MAKE SURE THE OTHER TWO KEEP RUNNING. NOW I CAN SET IT AT 4- 5 AND. FREEZE.
Read less
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people
found this instruction helpful.
-
Gerald from WINTERVILLE, GA
- Very Easy
- Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
door hinge
2 of 2 people
found this instruction helpful.
-
Steve from BRANDON, MS
- Very Easy
- Less than 15 mins
-
Nutdriver, Socket set
put block of wood under the door, removed old hinge and installed the new one. about 15 minutes
Was this helpful?
Thank you for voting!
Light out
2 of 3 people
found this instruction helpful.
-
Jodi from Benton Harbor, MI
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
Turned off the breaker to the fridge because I couldn't reach the power plug to unplug it . Use small flat head screwdriver to pop out the piece, disconnected the rubber prong connectors, inserted the new piece into the rubber prongs snapped it back into place. Flipped the breaker back on and prayed it worked. It did and I saved myself $
... Read more
120 service call.
Read less
Was this helpful?
Thank you for voting!
Refrigerator was running 24/7 and not cooling
3 of 6 people
found this instruction helpful.
-
Louie from Mount Airy, MD
- Really Easy
- 15 - 30 mins
-
Socket set
I knew that the compressor was cooling because the freezer was half-working. The back wall was frozen-up and found that the iced-up coils where blocking the air circulation. So even if the fan was running, there was no air circulation. Hence the deforst cycle was not working.
Was this helpful?
Thank you for voting!
drawer rails broken
2 of 3 people
found this instruction helpful.
-
josh from springfield, OR
- Really Easy
- Less than 15 mins
-
Screw drivers
installed 3 of 4 shipped parts. ended up with 2 upper right hand slide rails, even though ones package said upper left.
Other Parts Used:
Was this helpful?
Thank you for voting!
Needed a new door module
2 of 3 people
found this instruction helpful.
-
Marc from Hollywood, FL
- Really Easy
- Less than 15 mins
Fit perfectly, took 2 seconds to install.
Was this helpful?
Thank you for voting!
the slide rail on the top drawer broke in half
2 of 3 people
found this instruction helpful.
-
Sandy from Greenwood, SC
- Really Easy
- Less than 15 mins
-
Screw drivers
I took the glass plate off the top of the drawer, then removed the draw. I then removed the two screws holding the slide rail. I put the new slide rail in place, put the screws back in it, slide the drawer back in place and replaced the glass top. nothing to it.
Other Parts Used:
Was this helpful?
Thank you for voting!
Refrigerator was not cooling
2 of 3 people
found this instruction helpful.
-
Jeffrey from Statesboro, GA
- Really Easy
- Less than 15 mins
-
Screw drivers
The refrigerator was no longer cooling and it was suggested by my father that it could be our defrost timer as he has owned many Hotpoint refrigerators in his lifetime and he said the defrost timer was always the problem he had with them when they were not cooling properly. I removed the cover and unplugged the defrost timer, ordered a n
... Read more
ew timer through this website and installed it by plugging it where the old timer was, replaced the cover and plugged the refrigerator back in. The refrigerator is now cooling again and just in time for Christmas.
Read less
Was this helpful?
Thank you for voting!
Light would no longer turn on
3 of 6 people
found this instruction helpful.
-
paypal_shipping_address from Ripon, CA
- Really Easy
- Less than 15 mins
-
Pliers
I watched the video online, followed the instructions and within minutes had the part installed. The frig light was working once again! I will say the original switch was very snug and I had to do some very minor scraping of the plastic to get the new part to slide in.
Was this helpful?
Thank you for voting!
Refrigerator door won't close
3 of 6 people
found this instruction helpful.
-
CYNTHIA from NEWARK, DE
- Easy
- 15 - 30 mins
-
Wrench (Adjustable)
First I removed the top hinge of the refrigerator door and then lifted it off the bottom assembly. I had to turn the door on its side to work on the bottom where the broken part was located. I unscrewed the bottom assembly and replaced the broken part with the new door cam. Put it all back together and now the door closes but must be manu
... Read more
ally pushed to close. When the door was working properly it would shut automatically when released from any position. I think I need to install an additional part - maybe a shim? to make it close automatically. That will be another story.
This was a fairly simple jog to do but since I did not have the proper tools it did take me longer than usual to remove the bolts. I'm happy I did it myself and saved a big repair bill! Thanks to the people at PartSelect.com.
This was a fairly simple jog to do but since I did not have the proper tools it did take me longer than usual to remove the bolts. I'm happy I did it myself and saved a big repair bill! Thanks to the people at PartSelect.com.
Read less
Was this helpful?
Thank you for voting!
Refrig & Freezer Warmer than normal but could manually reset and defrost. Then good for several days.
2 of 3 people
found this instruction helpful.
-
Charles from Barnwell, SC
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Removed guard at bottomof frig. Located timer & performed tests. Manually rotated timer motor until defrost cycle start. Watched timer for several hours. Timer did not come out of defrost.. Rotated timer more until compressor started. Cooled fine several days then started to get warm again. Manually defrosted and started compressor a
... Read more
gain. Ordered part. Followed wiring diagram on timer for push on lugs. Frig now back to normal operation.
Read less
Was this helpful?
Thank you for voting!