EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3968 - Instructions

All Instructions for the 3968
106 - 120 of 178

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
on Indicator light on all time
  • Euclides from Orlando, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Disconnect the range from wall outlet. remove 2 screws in the back of the cabinet,remove switch plug. connect back range to outlet to check if it is the switch. make sure the light isn't on. then I order the switch online at PartSelect.com and it arrived in 2 days. When I installed the piece, the problem had been solved. I hope this infor mation will be helpful for others.
Was this helpful?
Thank you for voting!
My oven was not holding temperature.
  • Anthony from Acworth, GA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I removed the old sensor via the two screws holding it in, unplugged it and replaced it with a new one.
Was this helpful?
Thank you for voting!
Oven would not program and would shut down
  • Sreve from Deland, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
The "PartsSelect" General discription of the parts funtion helped me to confirm my suspitions that there was some form of temperature registering problem. I whatched the short video they provided on how to change the part out, even though, in this case, it's pretty self explanitory.The part was in my hands a day erlier than promised and i n reality, much earlier than I had anticipated from the beginng. It took me all total, 20 minutes to exchange the part out and have the oven in operation again.
Was this helpful?
Thank you for voting!
Replace 8" Element Switch
  • John from Summerfield, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Disassembled upper unit with Phillips screwdriver. Removed 2 "plug connectors" from element switch. Replaced switch. Plugged both connectors back onto switch. Reassembled the upper portion of the range. Tested and OK
Was this helpful?
Thank you for voting!
temperature varied in oven.couldn't set
  • tom from winter haven, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed 2 screws in probe and pulled it out.had to take back off as wire was tangled from factory and couldn't do quick repair
Was this helpful?
Thank you for voting!
The oven was not heating up to temperature
  • Max from Bothell, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I replaced the oven sensor which was easy to replace. A pigtail wire was provided with the sensor which is intended to be installed first so you don't have to reach around the front and back of the oven at the same time. The replacement was easy. However, that turned out not to be the problem. The real problem was the maytag electroni c clock control timer, temperature control unit. The part number is 7601P177-60. This device has been discontinued and I was fortunate enough to find the part at a local supplier. Once I replaced this, the problem went away. The oven heats up normally. My original symptom was that when setting the oven temperature to something like 350 degrees, the display would rapidly report heating up the oven to that temperature, and the oven was only mildly warm. If you have that symptom, it is probably not the oven sensor. It is the electronic clock unit. Hope you can find one. If you can't, I think you need to by a new oven. Regards
Was this helpful?
Thank you for voting!
Oven randomly turned off and locked
  • Robert from homilton, MT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Replace the oven sensor per the excelent easy video you provided
Was this helpful?
Thank you for voting!
Oven tempature varies.
  • Wilfred from Hoover, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
We took the back off the stove and unscrewed the two screws from the inside holding the sensor on and pulled it through and plugged it in and then replaced the screws. Very easy. We are still having trouble as the display does not read the same as the tempature is in the oven.
Was this helpful?
Thank you for voting!
oven temperature was of & then taking along time to heat
  • Barbara from Newark, DE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Followed video
Was this helpful?
Thank you for voting!
Upper oven shut down after reaching temperature
  • Earl from Globe, AZ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
The hardest part was deciding if this part would fix the problem. The upper oven became unusable. Both elements worked fine until reaching temperature. The oven would not come back on after that. I took two screws out. Then I pulled the wires out and unsnapped the coupling. The install was reverse. I just snapped the coupling in pla ce and replaced the two screws. All works fine now. Saved a couple thousand as wife was prepared to buy a new one.
Was this helpful?
Thank you for voting!
The front left side burner was broken.
  • Yelena from San Francisco, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
We lifted the glass top, uninstalled the old burner and installed the new burner in it's place. It worked right away - and is still working. No other tricks the new burner was a perfect fit.
Was this helpful?
Thank you for voting!
Used stove was missing 1 leg.
  • Clarence from Monroe, WI
  • Really Easy
  • Less than 15 mins
  • Pliers
My used stove had been dropped by the previous owner. While I could live with the minor scratches on one side the wooden shims holding up one corner were annoying. A new leveling leg was less than $2. I used a pair of needle nose pliers to straighten the mounting hole and screwed the new leg in. This used stove was originally $2000 but I bought it for $999. the new leg plus shipping was about $10. What a deal.
Was this helpful?
Thank you for voting!
Broken leveling leg.
  • Don from Crestwood, MO
  • Really Easy
  • Less than 15 mins
  • Pliers
This is a no brainer. I am only doing this because you asked. Pull out the stove, tilt it back, remove broken leg, install new leg.
Was this helpful?
Thank you for voting!
Light bulb failure
  • Grant from Alexandria, VA
  • Really Easy
  • Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!
Oven light Switch
  • William from APACHE JUNCTION, AZ
  • Really Easy
  • Less than 15 mins
  • Pliers
Compressed the springs and removed the damaged switch, then changed the wiring over to the new switch and press into place, worked fine.
Was this helpful?
Thank you for voting!
All Instructions for the 3968
106 - 120 of 178