38FK Magic Chef Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Thermostat bulb was hanging loose
2 of 5 people
found this instruction helpful.
-
Willi from Old Saybrook, CT
- Really Easy
- Less than 15 mins
-
Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people
found this instruction helpful.
-
RAYMOND from JACKSONVILLE, FL
- Really Easy
- Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Replaced appliance bulb in owen
1 of 2 people
found this instruction helpful.
-
Billy from Grand Prairie, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed burnt bulb. On replacing the bulb I glued the bracket, retainer gasket and bulb cover together- I used only a small amount of glue-just enough to hold the three items together. You need to do this since the three items slip in your hand while you attempt to screw the bracket to the oven wall. Need my help, email me @ Lexidog999@t
... Read more
x.rr.com
Read less
Was this helpful?
Thank you for voting!
old tube burned out
2 of 5 people
found this instruction helpful.
-
JERRY from SPANISH FORK, UT
- Really Easy
- Less than 15 mins
removed the shield and removed the old tube. Replaced with the new tube and replaced the shield. The only place I could locate this tube was through the internet. This Co. had as good a price including shipping that I found.
Was this helpful?
Thank you for voting!
After doing an oven self clean cycle, oven temp couldnt be set correctly, heat element was warm,not hot
1 of 2 people
found this instruction helpful.
-
Philip from Winter Haven, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
After trying to set the bake temp after the self cleaning, it would not heat up. I Googled the model number,selected your link because it mentioned my symptom,and said usually it is the temp sensor in the oven that gets damaged by the high self cleaning heat. Your site had a place to enter my model number. You provided a great exploded vi
... Read more
ew of the parts, showing me my sensor,then you provided the part number of the kit i needed,and filled out the order form with payment method. Less than a week later I got my part with instructions. Your video showed me the two screws I remove from the front ,and I pulled the old part out and uplugged it's connector. Replacement was easy, and oven was fixed! Thank you for a great site! You held my hand through it all!
Read less
Was this helpful?
Thank you for voting!
Terminal block arc'ed because a wire had become loose.
1 of 2 people
found this instruction helpful.
-
Larry from Scranton, KS
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Ordered and received the terminal block. Installed it along with a new 220V power cord and the appropriate insulator . Ensured the terminals were tight with a nut driver. Reinstalled cover. Then, using the control panel, I did a function check on all the heating elements, clock, oven light, to satisfy all operational requirements. All ch
... Read more
ecked good! And, I was relieved that the control panel had not been shorted out as the terminal block was due to a loose connection. Easy fix.
Read less
Was this helpful?
Thank you for voting!
Broiler element broken
1 of 2 people
found this instruction helpful.
-
Walter J from Boynton Beach, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Very simple, unscrew the old element. Remove the electrical spade connectors and reverse to install new element. The folks at parts select.com were very helpful and even after I ordered the wrong part, the return process was hassle free. Prompt shipping, very happy.
Was this helpful?
Thank you for voting!
Top oven element works, but bottom element works only intermittently
2 of 5 people
found this instruction helpful.
-
Bruce from Glencoe, MN
- Really Easy
- 15 - 30 mins
-
Screw drivers
Replaced the long Oven Sensor but have not resolved the root problem. Oven still will not reach required temperature. Bottom element becomes red hot, but turns off and will not start again.
Was this helpful?
Thank you for voting!
Oven Over Heating
1 of 2 people
found this instruction helpful.
-
Steve from New Albany, OH
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed the oven from the wall. Removed back cover and unplugged sensor from the harness. Remove and replace sensor from inside the oven. Reconnect harness and reinstall back cover. Secure oven back into the wall.
Was this helpful?
Thank you for voting!
F1-1 and F3-1 error code
2 of 5 people
found this instruction helpful.
-
Barbara from Lakeville, MA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Very easy to repair, but you have to be able to pull your stove out. Two screws in the oven and then remove part of back cover of oven and one plug from there. Simple to do, but did not fix our problem. We are waiting repair now from service company as it looks like it needs a control panel. Worth trying yourself to fix the problem.
... Read more
Inexpensive part and easy to install. Also be sure to turn power off your oven to reset the control panel as this may fix the problem - try this first and also after installing new part - like rebooting a computer...
Read less
Was this helpful?
Thank you for voting!
my stovetop light did not work
1 of 2 people
found this instruction helpful.
-
Geraldine M. from Fork Union, VA
- Really Easy
- 15 - 30 mins
We actually had to get the repairman back that had repaired our microwave. Our range has the attached microwave above the range. My stovetop light worked prior to the visit. When he left, I prepared supper without the light, which did not go on. Ultimately, we had to replace the fluorscent tube, which thankfully, you had. No applianc
... Read more
e store in a 35 mile radius did. We finally got the glass protector off, and the new tube did not go on. Back to the repairman, to tell him the new bulb did not work and that probably something happened when he visited before. He came back, found that indeed a wire had been broken when he was working on the microwave. I had indicated to him I did not expect to pay another repair bill after I had alrealy spent 117. before plus the cost of the new bulb, 22. something including shipping. He obliged and id not charge me anythink to repair the broken wire.
Now I have the old bulb for back up!!!
Thank you for having my replacement tube!!
Now I have the old bulb for back up!!!
Thank you for having my replacement tube!!
Read less
Was this helpful?
Thank you for voting!
Oven would not heat
1 of 2 people
found this instruction helpful.
-
Ralph from Nicholasville, KY
- Easy
- 30 - 60 mins
-
Screw drivers
Flipped off breaker and removed oven door and pulled built in stove out so the back panel could be removed. Unplugged the sensor then removed the two screws securing the old sensor inside the oven and installed new sensor. Put stove back together and installed back into counter top, re-installed oven door, flipped on the breaker and ove
... Read more
n works like new.
Read less
Was this helpful?
Thank you for voting!
Oven not heating to desired temp
2 of 5 people
found this instruction helpful.
-
Raymond from Ridgecrest, CA
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Screw drivers
Had to remove oven from mounting cabinet to get to the back since the wire lenght to the conector was to short to come through the mounting hole.
Other than that the repair was straight forward. 4 screws to dismount the Oven from cabinet, 2 screws to remove Sensor and 3 srews to open the back of the oven once out in the open. New cab ... Read more le adapter that came with the new sensor was needed in my case.
Other than that the repair was straight forward. 4 screws to dismount the Oven from cabinet, 2 screws to remove Sensor and 3 srews to open the back of the oven once out in the open. New cab ... Read more le adapter that came with the new sensor was needed in my case.
Read less
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people
found this instruction helpful.
-
Ivanka from Atlantra, GA
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh
... Read more
t bulb in was not the problem.
Read less
Was this helpful?
Thank you for voting!
element or temperature sensor failed: not working
1 of 3 people
found this instruction helpful.
-
David from Mary Esther, FL
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Removed unit from counter, removed 14 screws holding glass top to frame, removed ceramic element, swapped over mounting brackets to new element, checked wireing as per instruction sheet (direct replacement) connected wires, re-installed glass top to frame and placed back into counter. ops check good.
Was this helpful?
Thank you for voting!