EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

38FK Magic Chef Range - Instructions

All Instructions for the 38FK
121 - 135 of 237

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
element shorted out startedto arch inside oven
1 of 3 people found this instruction helpful.
  • David from Traverse city, MI
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Turned off power, first then removed two screws
from bracket holding element. Then removed two
screws from element mounting bracket. I then
disconnected two wires using piers, and one with
a screwdriver. then put the newone in, in reverse.
Was this helpful?
Thank you for voting!
Error code F-1&F-3
1 of 3 people found this instruction helpful.
  • Carl from Franklin, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove two screws back panel and remove sensor two screws inside top oven.
Was this helpful?
Thank you for voting!
missing clock knob
1 of 3 people found this instruction helpful.
  • Jimmie from Hampton, VA
  • Really Easy
  • Less than 15 mins
placed knob on clock shaft with my fingers
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people found this instruction helpful.
  • Janet from Ada, MI
  • Really Easy
  • Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people found this instruction helpful.
  • William from Schwenksville, PA
  • Easy
  • Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
not heating/kicking oven off
0 of 1 people found this instruction helpful.
  • Kevin from Virginia, IL
  • Easy
  • Less than 15 mins
  • Screw drivers
Husband got on partselect.com and read reviews, we ordered a long oven sensor kit. When it came in the mail, I took it out and look at it, decided I could probably switch the part.... and so I did. Easy Breezy ... and it worked well
Was this helpful?
Thank you for voting!
F2 and F5 if I remember correct.
2 of 7 people found this instruction helpful.
  • Joe from Troy, AL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Removed the two screws pulled the element out and unhooked the wires then used one of the included adapters to reinstall the new sensor then screwed the two screws back in to secure the sensor. Everything works fine now.
Was this helpful?
Thank you for voting!
Varying heat
0 of 1 people found this instruction helpful.
  • Kimbel from Rhoadesville, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed two screws, unplugged the old unit, plugged in the new, screwed the new in. Job done. Would have been less than five minutes if I hadn't kept dropping the screws.
Was this helpful?
Thank you for voting!
thermostat temprature bulb hanger clips
1 of 4 people found this instruction helpful.
  • Dwayne from Atlanta, GA
  • Really Easy
  • Less than 15 mins
snaped them into oven cavity attached temp bulb job complete
Was this helpful?
Thank you for voting!
replaced oven lightbulb
0 of 1 people found this instruction helpful.
  • peggy ann from forest city, NC
  • Really Easy
  • Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Light burned out in upper oven
0 of 1 people found this instruction helpful.
  • Shirley from Las Vegas, NV
  • Really Easy
  • Less than 15 mins
Screwed in light bulb and glass protector
Was this helpful?
Thank you for voting!
Oven would not turn on and get hot.
0 of 1 people found this instruction helpful.
  • Tom from Altus, OK
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Our oven quit working again. I called the repair(dealer) man and he said we needed a new control panel. It would cost $180.00 and labor would be $60. The total repair would be $240.00. We considered just purchasing a new one. It is a slide-in range and they start at about $1500. So I began looking for a control panel on line. I found yo ur web site and entered what was wrong with the oven. Your site suggested we try replacing the oven sensor. There was a video that showed how simple the repair was. We ordered the part. It came quickly and I immediately made the repair (about 10 min). I was very disappointed that it did not work. I went back to you web site and tried the next option. It was a terminal block for only $20.00. I didn't even know what a terminal block was, what it looked like or where on the range to find it. But I went again to your video and I learned quickly what to do. I ordered the part and it came in two days. I made the repair in about 15 min. My wife was very happy that the repair worked. Our total cost was about $80. The $240 quote would not have fixed the oven anyway. The repairman was wrong. I was very happy with the results and the money we saved.. Good Job PartSelect and thanks.
Was this helpful?
Thank you for voting!
Oven temperature all over the place
0 of 1 people found this instruction helpful.
  • Paul from Plaistow, NH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I slide the oven out from the counter and unpluged it. I removed all the oven racks. I then removed the machine screws that held the sheet metal that covered the back of the unit. This made it a lot easier to disconnect the long oven sensor wire and put the wire through the insulation. I removed the two screws on the inside of the oven th at held the sensor onto the inside rear wall of the oven. The old sensor did not test too bad but the temperature is reaching the set temperature. I still had to adjust the oven temp up ten degrees using the control panel. I have learned that it takes a few cycles of the element going off and on during the warming to reach the desired set temperature. One more issue is that the buzzer goes off signaling that the set temperature has been reached when it has not. When I set it for 350 F the buzzerr goes off at 280 F and I have a good oven thermometer. I own three oven thermometers and they all read the same. We use to have nothing but Maytag appliances but no more. We have had issues with Maytag front loading washers and ranges. PartSelect is great. Good prices and fast delivery.
Was this helpful?
Thank you for voting!
Getting codes and beeping
1 of 4 people found this instruction helpful.
  • Arthur from Dallas, TX
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Control panel was responsive however oven would not heat up. I Replaced sensor with one of the adapters and oven is now working again.
Was this helpful?
Thank you for voting!
Had to replace heating element and element gasket
0 of 1 people found this instruction helpful.
  • George from Camp Springs, MD
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed old element and element gasket. Replaced both by alining gasket with element and screwing in retaining screws. Jod completed.
Was this helpful?
Thank you for voting!
All Instructions for the 38FK
121 - 135 of 237