EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

38FG Magic Chef Range - Instructions

All Instructions for the 38FG
106 - 120 of 277

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burner ceramic disintegrated & spalled
1 of 2 people found this instruction helpful.
  • Gary L from North Tonawanda, NY
  • Really Easy
  • Less than 15 mins
Pulled buner element out of socket as you would for detailed cleaning. Replaced burner element & drip pan with OEM parts. Fit was perfect, tested burner on all heat ranges, good as new.
Was this helpful?
Thank you for voting!
Replaced appliance bulb in owen
1 of 2 people found this instruction helpful.
  • Billy from Grand Prairie, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed burnt bulb. On replacing the bulb I glued the bracket, retainer gasket and bulb cover together- I used only a small amount of glue-just enough to hold the three items together. You need to do this since the three items slip in your hand while you attempt to screw the bracket to the oven wall. Need my help, email me @ Lexidog999@t x.rr.com
Was this helpful?
Thank you for voting!
Large burner on stove not working
1 of 2 people found this instruction helpful.
  • Cherie from Dowagiac, MI
  • Really Easy
  • Less than 15 mins
I removed the heating element and noticed that the prongs were corroded. I looked for a model number but couldn't find it so it made it difficult to find a replacement until I got on this website. I found the replacement part and also found that as I checked for other sites for this part this company was the most resonable priced.
T he part arrived and I replaced it in seconds. Turned it on and it worked immediately. Super easy.
Was this helpful?
Thank you for voting!
Terminal block arc'ed because a wire had become loose.
1 of 2 people found this instruction helpful.
  • Larry from Scranton, KS
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Ordered and received the terminal block. Installed it along with a new 220V power cord and the appropriate insulator . Ensured the terminals were tight with a nut driver. Reinstalled cover. Then, using the control panel, I did a function check on all the heating elements, clock, oven light, to satisfy all operational requirements. All ch ecked good! And, I was relieved that the control panel had not been shorted out as the terminal block was due to a loose connection. Easy fix.
Was this helpful?
Thank you for voting!
Drip bowls very dirty and stained
1 of 2 people found this instruction helpful.
  • john from donna, TX
  • Really Easy
  • Less than 15 mins
Remove burner elements. Remove old drip pans. Thoroughly clean stove top under drip pan edges, and under top cover. Install new drip pans. Install burner elements.
I never seem to be able to find the correct replacement drip pans at retail outlets in the quantities I need. Your parts identification, selection and ordering proces ses were simple and delivery was faster than I hed expected.
Thank you
Was this helpful?
Thank you for voting!
Old burner pan warped.burner sat at 15 degree angle.
1 of 2 people found this instruction helpful.
  • Michael from Portland, OR
  • Really Easy
  • Less than 15 mins
Removed burner and then burner pan.Then replaced pan and reinstalled burner.
Was this helpful?
Thank you for voting!
old tube burned out
2 of 5 people found this instruction helpful.
  • JERRY from SPANISH FORK, UT
  • Really Easy
  • Less than 15 mins
removed the shield and removed the old tube. Replaced with the new tube and replaced the shield. The only place I could locate this tube was through the internet. This Co. had as good a price including shipping that I found.
Was this helpful?
Thank you for voting!
Thermostat bulb was hanging loose
2 of 5 people found this instruction helpful.
  • Willi from Old Saybrook, CT
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
After doing an oven self clean cycle, oven temp couldnt be set correctly, heat element was warm,not hot
1 of 2 people found this instruction helpful.
  • Philip from Winter Haven, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
After trying to set the bake temp after the self cleaning, it would not heat up. I Googled the model number,selected your link because it mentioned my symptom,and said usually it is the temp sensor in the oven that gets damaged by the high self cleaning heat. Your site had a place to enter my model number. You provided a great exploded vi ew of the parts, showing me my sensor,then you provided the part number of the kit i needed,and filled out the order form with payment method. Less than a week later I got my part with instructions. Your video showed me the two screws I remove from the front ,and I pulled the old part out and uplugged it's connector. Replacement was easy, and oven was fixed! Thank you for a great site! You held my hand through it all!
Was this helpful?
Thank you for voting!
Burners needed replacing
1 of 2 people found this instruction helpful.
  • Alene from INDIANAPOLIS, IN
  • Very Easy
  • Less than 15 mins
Pulled out the old burners and put in the new ones.
Was this helpful?
Thank you for voting!
The three braces under the coils had weakened and fallen apart
2 of 5 people found this instruction helpful.
  • Suzanne from COZAD, NE
  • Very Easy
  • Less than 15 mins
I simply pulled out the old coils and plugged in the new ones. I saved the little pieces that accompanied each coil, because I didn't know what they were used for.
Was this helpful?
Thank you for voting!
Drip pans were old and with burnt on food that I couldn't get off. Disgusting!!
1 of 2 people found this instruction helpful.
  • Nicki from ELSIE, NE
  • Very Easy
  • Less than 15 mins
No problem Took off old ones and replaced with new.
Was this helpful?
Thank you for voting!
Drip pans needed to be replaced
1 of 2 people found this instruction helpful.
  • Mark from ROSENBERG, TX
  • Very Easy
  • Less than 15 mins
1) removed heating elements. 2) removed drip pans. 3) installed new drip pans. 4) reinstalled heating elements
Was this helpful?
Thank you for voting!
Simple - needed to replace the drip pans on the stove between tenants in a rental apartment
1 of 2 people found this instruction helpful.
  • Tama from Pacific Grove, CA
  • Really Easy
  • Less than 15 mins
This wasn't much of a repair -- rather a replacement of a simple abused part. At the same time, PartSelect allowed me to order what I needed after two failed attempts to buy replacements that would fit the range. I'll remember PartSelect if we need parts for other older appliances in the rental units.
Was this helpful?
Thank you for voting!
Element had burned out
1 of 2 people found this instruction helpful.
  • Judith from Star, ID
  • Really Easy
  • Less than 15 mins
Package arrived while I was working at the computer and my husband announced minutes later, "That's what I like to see". I didn't know what he was talking about until he tossed the packing list on my desk and said, "It works perfectly. Good Job!" It had only taken a minute to pop the new parts in and he already had water on for coffee.
Was this helpful?
Thank you for voting!
All Instructions for the 38FG
106 - 120 of 277