EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

38FG Magic Chef Range - Instructions

All Instructions for the 38FG
121 - 135 of 277

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My drip pans were in bad shape
2 of 5 people found this instruction helpful.
  • Sandra from Oldsmar, FL
  • Really Easy
  • Less than 15 mins
I removed the old and repaced with new. I never ordered anything one day and got it the next. I'm impressed
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people found this instruction helpful.
  • RAYMOND from JACKSONVILLE, FL
  • Really Easy
  • Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
F1-1 and F3-1 error code
2 of 5 people found this instruction helpful.
  • Barbara from Lakeville, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Very easy to repair, but you have to be able to pull your stove out. Two screws in the oven and then remove part of back cover of oven and one plug from there. Simple to do, but did not fix our problem. We are waiting repair now from service company as it looks like it needs a control panel. Worth trying yourself to fix the problem. Inexpensive part and easy to install. Also be sure to turn power off your oven to reset the control panel as this may fix the problem - try this first and also after installing new part - like rebooting a computer...
Was this helpful?
Thank you for voting!
my stovetop light did not work
1 of 2 people found this instruction helpful.
  • Geraldine M. from Fork Union, VA
  • Really Easy
  • 15 - 30 mins
We actually had to get the repairman back that had repaired our microwave. Our range has the attached microwave above the range. My stovetop light worked prior to the visit. When he left, I prepared supper without the light, which did not go on. Ultimately, we had to replace the fluorscent tube, which thankfully, you had. No applianc e store in a 35 mile radius did. We finally got the glass protector off, and the new tube did not go on. Back to the repairman, to tell him the new bulb did not work and that probably something happened when he visited before. He came back, found that indeed a wire had been broken when he was working on the microwave. I had indicated to him I did not expect to pay another repair bill after I had alrealy spent 117. before plus the cost of the new bulb, 22. something including shipping. He obliged and id not charge me anythink to repair the broken wire.
Now I have the old bulb for back up!!!
Thank you for having my replacement tube!!
Was this helpful?
Thank you for voting!
Broiler element broken
1 of 2 people found this instruction helpful.
  • Walter J from Boynton Beach, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Very simple, unscrew the old element. Remove the electrical spade connectors and reverse to install new element. The folks at parts select.com were very helpful and even after I ordered the wrong part, the return process was hassle free. Prompt shipping, very happy.
Was this helpful?
Thank you for voting!
surface burner heating element broken
2 of 6 people found this instruction helpful.
  • Marlene from Charleston, SC
  • Really Easy
  • Less than 15 mins
took out old element, replaced with new.
Was this helpful?
Thank you for voting!
The burner was shortening out and would work sometime. The first time I replace the burner but the new one shorted out quickly.
1 of 3 people found this instruction helpful.
  • shawn from Vancouver, WA
  • Really Easy
  • Less than 15 mins
  • Pliers
I unplugged the stove. Took out the burner and removed receptacle by pulling it out of the bracket and clipping the wires. One thing you want to make sure is that when you clip the wires from the receptacle you're replacing you leave enough wire so that you can connect them to the wires on the new receptacle when it is in place on the stove. I had just enough but would have liked more. The bracket I received didn't match the one on the stove so I used the one on the stove since the receptacle itself was the same as the one I was replacing.
Was this helpful?
Thank you for voting!
missing clock knob
1 of 3 people found this instruction helpful.
  • Jimmie from Hampton, VA
  • Really Easy
  • Less than 15 mins
placed knob on clock shaft with my fingers
Was this helpful?
Thank you for voting!
Receptacle had become bad poor connection.
1 of 3 people found this instruction helpful.
  • JAMES from Harrodsburg, KY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I disconnect the breaker. I removed the defected receptacle and cut the wires. I connected the new receptacle with parts with the new part. Turned the breaker back on and everthing worked fine.
Was this helpful?
Thank you for voting!
element shorted out startedto arch inside oven
1 of 3 people found this instruction helpful.
  • David from Traverse city, MI
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Turned off power, first then removed two screws
from bracket holding element. Then removed two
screws from element mounting bracket. I then
disconnected two wires using piers, and one with
a screwdriver. then put the newone in, in reverse.
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people found this instruction helpful.
  • Ivanka from Atlantra, GA
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh t bulb in was not the problem.
Was this helpful?
Thank you for voting!
Electrical receptacle for burner was defective.
0 of 1 people found this instruction helpful.
  • gerald from Hillsboro, TN
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers, Socket set
After buying a 'universal' part at Lowe's and it not fitting correctly and shorting out the burner, I went online and found this source for an exact replacement part. Beside having to disassemble the drop in stove burner two or three times it went well when I had the correct part. I lost one screw somewhere and that delayed me a short t ime to find a replacement. Thus the 1 to 2 hours. It would have been about a 30 minute job if I had been smarter.
Was this helpful?
Thank you for voting!
Oven temperature lagging set temperature by almost 100F
0 of 1 people found this instruction helpful.
  • William from Edgewood, WA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Removed frame to cabinet lag screws
Slid oven out of cabinet (required because wire harness could not be pulled through inside of oven)
Removed two screws holding attaching sensor inside oven
Uncoupled wire harness
Installed new sensor in reverse order

Unfortunately, neither the new bake element or sensor fi xed the problem, so I just ordered the more expensive control board -- hope that does it.
Was this helpful?
Thank you for voting!
Little or no heat from oven, cakes baking unevenly
3 of 10 people found this instruction helpful.
  • STEVE from Lehigh Acres, FL
  • Easy
  • 30 - 60 mins
  • Screw drivers
Replaced both parts to not take any chances. Had to first find the hole in the back of the oven for the temperature sensor kit. We were trying too hard and overlooked the obvious. It goes behind the small black panel, as you look at the back of the stove it is top left and held in place by only one screw. Once we found it everything went very well and the oven is working great-back in the cake business again!
Was this helpful?
Thank you for voting!
one of wire melted and broken off from receptacle
0 of 1 people found this instruction helpful.
  • Young from Cordova, TN
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Cut broken wire and existed wire off and put splice on both new and old wires to connect them.
It's easy job.
Was this helpful?
Thank you for voting!
All Instructions for the 38FG
121 - 135 of 277