EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3890 - Instructions

All Instructions for the 3890
46 - 60 of 113

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
knobs were getting hard to read.
1 of 2 people found this instruction helpful.
  • Dave from Bloomingburg, NY
  • Really Easy
  • Less than 15 mins
Pulled old knobs off, pressed new ones on. Probably well under a minute for 6 knobs. Anyone with the IQ of a horseradish could have done it. But what was really great was the help and personality of the agent at the other end of the phone. Shipping was as promised, and the entire experience was delightful!
Was this helpful?
Thank you for voting!
lost one of the knobs
1 of 2 people found this instruction helpful.
  • Sabra from Dallas, TX
  • Really Easy
  • Less than 15 mins
Ordering and installing was easy. The hardest part was getting the exact match to 20 yr. old appliance knobs. First one I ordered had wrong shaft hole, but it matched perfectly in design. Decided to reorder and just replace all four with matching new-style knobs and the correct shaft hole. Yeah. Looks great and REALLY easy to install.
Was this helpful?
Thank you for voting!
Drip pans were in need of replacement
1 of 2 people found this instruction helpful.
  • JOANNE from MONKEY ISLAND, OK
  • Really Easy
  • Less than 15 mins
No brain surgery required. Removed electric burner, put in new drip pans. Voila! Good for many more years of service looking like new.
Was this helpful?
Thank you for voting!
The original grease filter was damaged in our dishwasher (it is quite fragile) and needed to be replaced.
1 of 2 people found this instruction helpful.
  • Martyn from Middletown, OH
  • Really Easy
  • Less than 15 mins
1. Remove the exhaust vent cover, located in the center of the top of the range. It just lifts off.
2. Swivel the clamp 90 degrees to release the filter.
3. Remove the filter and throw it away
4. Place new filter in place and lock in place by rotating the swivel clamp back 90 degress.
5. Replace the exhaust vent cover
Was this helpful?
Thank you for voting!
Drip pans were a mess
1 of 2 people found this instruction helpful.
  • Chhristopher from Houston, TX
  • Really Easy
  • Less than 15 mins
Replaced the drip pans
Was this helpful?
Thank you for voting!
Elec. stove-top knobs (imprinted with HI to LO numbers 1 to 10)worn to non-readable.
1 of 2 people found this instruction helpful.
  • Lenice from Stuart, FL
  • A Bit Difficult
  • 30 - 60 mins
Knobs sent fit the shafts, but due to molded internal stop wouldn't seat. Had to drill out the stop, and also file down the shafts a bit for knobs to seat acceptably closer to stove-top.
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people found this instruction helpful.
  • Ivanka from Atlantra, GA
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh t bulb in was not the problem.
Was this helpful?
Thank you for voting!
Over the years the numbers has worn off the knobs.
1 of 3 people found this instruction helpful.
  • John from Flippin, AR
  • Really Easy
  • Less than 15 mins
Fed-Ex delivered the package and within 10 min I had open the package, removed the old knobs and installed the new ones, My wife was very impressed with the ease of the transactionl. It is good to know that we can still get parts for our cook top even though it is 26 years old. Thanks for every thing.
Was this helpful?
Thank you for voting!
Existing knobs were bent & unreadable
1 of 3 people found this instruction helpful.
  • James from Smithfield, VA
  • Really Easy
  • Less than 15 mins
Removed old knobs and installed new. No tools were required.
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people found this instruction helpful.
  • Janet from Ada, MI
  • Really Easy
  • Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
vent fan cloging up
0 of 1 people found this instruction helpful.
  • JAMES from McALESTER, OK
  • Really Easy
  • Less than 15 mins
old filter fell into from removing and cleaning,
removed cover pulled out filter ,replaced it with new one.
Was this helpful?
Thank you for voting!
My drip pans had rusted and I had a hole in one of them.
0 of 1 people found this instruction helpful.
  • Bobby from Paragould, AR
  • Really Easy
  • Less than 15 mins
I just pulled the electric element out of the slot and dropped the drip pan in place and slipped the electric element back in place and it was ready to go. It looks almost new. We built a new house in 95. It took 17 months to build it. I got the stainless steel cook top that you can have the grill on one side or you can pull the grill of f and slip in the burners. It is only 4 burners but it is plenty to work with. It has a down draft.
Was this helpful?
Thank you for voting!
Filter needed replacement. Old one was falling apart.
0 of 1 people found this instruction helpful.
  • Sophie from Warrenton, VA
  • Really Easy
  • Less than 15 mins
Removed old filter, dropped in the new one.
(This really was not a "repair")
Was this helpful?
Thank you for voting!
old coil burners with one burned out
0 of 1 people found this instruction helpful.
  • Kenneth L. from Rush, KY
  • Really Easy
  • Less than 15 mins
Our old Jenn-air cooktop was at least 28 years old.They looked bad.We didn't see the need to buy a whole cooktop when the rest of the stove, fan,etc. still worked great. So I got on the Partselect web site and found a black radiant cartridge. It came exactly the day the said it would. I took out the old coil cartridge and plugged the new one. Lo, my stove now looks modern. We also ordered a terminal block. With this my husband repaired the old burned out coil burner and in about 20 minutes I had a spare to use with my canner. I really like the new cartridge and plan to buy another one. It was a pleasure to do business with Partselect.
Was this helpful?
Thank you for voting!
burned drip pans
0 of 1 people found this instruction helpful.
  • Julie from Bloomfield Hills, MI
  • Really Easy
  • Less than 15 mins
replaced drip pans--they fit perfectly and look great!
Was this helpful?
Thank you for voting!
All Instructions for the 3890
46 - 60 of 113