EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3890 - Instructions

All Instructions for the 3890
31 - 45 of 113

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
worn out control knobs that couldn't be read.
3 of 5 people found this instruction helpful.
  • Chester from Pittston, PA
  • Really Easy
  • Less than 15 mins
Simply pull off old knobs and replace with the new parts. Didn't think I was going to find replacement parts. The equipment is actually over 25 yrs old. Thanks for partselect.
Was this helpful?
Thank you for voting!
old, crusty drip pans
3 of 5 people found this instruction helpful.
  • John from Richardson, TX
  • Really Easy
  • Less than 15 mins
This was so easy. I've looked for years in stores for these pans. I finally tried the Internet, found PartSelects and, holding my breath at what i'd find, voila'...perfect fit, perfect replacements. And it took just a couple days to arrive. I'll definately be back!
/John
Was this helpful?
Thank you for voting!
install burner drip pans
3 of 5 people found this instruction helpful.
  • Warren E from Newport, VT
  • Really Easy
  • Less than 15 mins
Did not need tools for this job. Simply lift burner element and remove old drip pan and put new one in its place. However - the drip pans that were shipped only fit on the left side of the range. The right side, where the grill attachment goes, is so shallow that the drip pans on that side hit the bottom plate beneath the burner ele ment and would not let the element go down far enough to seat properly. I kept the two pans that don't fit for extras, but I still need shallower pans to fit on the right side.
Was this helpful?
Thank you for voting!
Change the Oil/Grease Filter
2 of 3 people found this instruction helpful.
  • Yong from Houston, TX
  • Really Easy
  • Less than 15 mins
It is so easy. Once I found the right size of filter from the website, I ordered it right away. It came in 3 days and I just need to take out the old one and insert the new one. No instruction is necessary. By the way, the price of the filter is one third of that from Jenn-air.
Was this helpful?
Thank you for voting!
Knobs were worn badly
2 of 3 people found this instruction helpful.
  • Royce from Garland, TX
  • Really Easy
  • Less than 15 mins
Pulled off old knob, then pressed on the new one.
It was very easy, and the part was the correct one.
Was this helpful?
Thank you for voting!
Numbers on surface burner knobs were illegibel.
2 of 3 people found this instruction helpful.
  • Wayne from NEENAH, WI
  • Very Easy
  • Less than 15 mins
I also sprayed them 3-times with a clear coat before installing. The clear coat I purchased at WalMart once I noticed it claimed to be safe for plastic. Avoid a clear lacquer based product.
Was this helpful?
Thank you for voting!
old part lasted more than 20 yrs so needed to replace
1 person found this instruction helpful.
  • Anjali from TALLAHASSEE, FL
  • Very Easy
  • Less than 15 mins
just replaced by hand .
Was this helpful?
Thank you for voting!
All four knobs were stripped
1 person found this instruction helpful.
  • Christy from MOLALLA, OR
  • Very Easy
  • Less than 15 mins
We cleaned the rod on the stove and pushed the new knobs into place. This Jenn Air range was made in 1980. Nice to know Jenn Air is still making parts for their ranges. We also ordered new coil elements which fit perfectly size 6 inch and 8 inch.
Was this helpful?
Thank you for voting!
Burner knobs were wearing out, metal rims were falling off.
1 person found this instruction helpful.
  • beatrice from TUCSON, AZ
  • Very Easy
  • Less than 15 mins
Just slid off the old burner knobs, and pushed on the new ones. The most difficult part of the whole thing was just being sure that I ordered the correct knobs that used a D fitting. I ordered some a year ago that weren't the correct fitting.
Was this helpful?
Thank you for voting!
burner cartridge terminal broke due to electrical shock. circuit shortage caused the problem.
1 person found this instruction helpful.
  • Ge from Solon, OH
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers, Socket set
dissembled the burner, remove the broken blocpk and bad spade.rewiered and assembled the burner.
Was this helpful?
Thank you for voting!
my old knobs were so worn that I couldn't see the numbers
2 of 4 people found this instruction helpful.
  • Lynne from Weatherford, OK
  • Really Easy
  • Less than 15 mins
I had tried several other "universal" brands from the home improvement center but nothing worked with my Jen-Aire. I finally ordered from PartSelect and they fit perfectly! My range-top looks brand new and finding and ordering the correct parts was amazingly easy. Thanks!
Was this helpful?
Thank you for voting!
Burned out burner
1 of 2 people found this instruction helpful.
  • Esther from Alexandria, VA
  • Really Easy
  • Less than 15 mins
Pulled out the old burner and plugged in the new!
Was this helpful?
Thank you for voting!
Old Stove Top
1 of 2 people found this instruction helpful.
  • Robert A from Farmington `, CT
  • Really Easy
  • Less than 15 mins
Ordered new cartridges
Was this helpful?
Thank you for voting!
Thermostat bulb was hanging loose
2 of 5 people found this instruction helpful.
  • Willi from Old Saybrook, CT
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
old nkobs old and discolored
1 of 2 people found this instruction helpful.
  • WALTER from EL CAJON, CA
  • Really Easy
  • Less than 15 mins
took old knobs off replaced in 3 minutes
Was this helpful?
Thank you for voting!
All Instructions for the 3890
31 - 45 of 113