EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3841 - Instructions

All Instructions for the 3841
91 - 105 of 428

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
lens light was broken and missing.
1 person found this instruction helpful.
  • Allan from Rolla, MO
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Removed the cooktop using screwdriver. Pushed lens-light into cooktop hole.It was difficult to do and was where I spent most of my time. Next time I will spray bottom of lens- light with silicon so it goes in easier. I stood cooktop up on its side and inserted the red light assembly onto the lens-light. Reinstalled cooktop < br />and turned electrical power on.
Was this helpful?
Thank you for voting!
Lower burner not heating:
1 person found this instruction helpful.
  • John from Fishers, IN
  • Easy
  • 15 - 30 mins
  • Screw drivers
Ordered element and recieved in two days(yea). Removed back cover from unit. Removed two wire slide on wire clips. Then went inside oven cavity and removed two screws holding element intact. The element slid out. Installed element, re-installed two screws to hold element intact. Attached wire clips back on to element, re-attached back cover. Plugged unit back in and it worked perfectly. Eazy-peezy lemon squeezy.

John
Johnny on the Spot Home Repairs
Fishers, Indiana 317-997-3600
Was this helpful?
Thank you for voting!
The bake element burst.
1 person found this instruction helpful.
  • Diane from Littleton, CO
  • Easy
  • 30 - 60 mins
  • Screw drivers
Removed the two screws that held the element in place and then pulled off the element from the connectors. Slipped the new connectors on. Tested the oven - Baked some blackberry cobbler!
Was this helpful?
Thank you for voting!
original fixture required bulb - this fixture (all-in-one) was great
1 person found this instruction helpful.
  • wesley from ODENVILLE, AL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Pulled range out from cabinet-wall to get to back side, everthing was clearly exposed tlhen. Just a matter of installing new fixture, putting back on, reconnected power source - put range back in proper place.
Was this helpful?
Thank you for voting!
Replace the lower oven element
1 person found this instruction helpful.
  • Tom from ROCKTON, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the 220 cord..remove rear metal back ( 7-8 Ph/screws)... disconnect the red & yellow connectors from the back of the lower element. Remove-the-lift-off Oven door. Remove the two Ph/screws (one on either end of the element) At the very rear of the oven. Install the new element and reverse the about to reassemble.
Was this helpful?
Thank you for voting!
Jennair cooktop with coils lost one of its coil guides.
1 person found this instruction helpful.
  • Bruce from SOUTHBURY, CT
  • Really Easy
  • 30 - 60 mins
  • Socket set
We bought the replacement Ceramic plug and wires, and opened up the jennair cooktop piece and rewired the NEW coil guide into the system. It works great.
Was this helpful?
Thank you for voting!
Oven baking coil had burned out
1 person found this instruction helpful.
  • Marie from Fredericksburg, VA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Removed two screws from back of oven ,pulled apart old coil from wires, inserted new coil into the small metal pieces, pushed back and screws replaced. Really easy , anyone can do. Oh, I am 70 years old so probably people younger could do more quickly.
Was this helpful?
Thank you for voting!
Replaced upper over light and assembly
1 person found this instruction helpful.
  • Thomas from SAN DIEGO, CA
  • Very Difficult
  • More than 2 hours
  • Pliers, Screw drivers
I had to pull out the oven and balance the oven on two patio tables. Remove the back of the oven. Pull out the light assembly which was burnt. I was unable to remove the casing around the light, so I destroyed it with a pliers. Reinstalling the new light and assembly was easy. What made this job difficult, I could not remove the light ass embly from the front of the oven and had to go in from the back.
Was this helpful?
Thank you for voting!
Element didn't heat at all
1 person found this instruction helpful.
  • Roger from PATERSON, NJ
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Removed 2 screws, disconnected wires, attached wires to new element, put screws back. Turned oven on. Perfect.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person found this instruction helpful.
  • Richard from BOULDER, CO
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Removed the failed bake element per the video linked in the Partselect email. Unlike the video on YouTube the PartSelect video shows that the bake element can easily be replaced through the oven door and it is not necessary to slide the range out and remove a rear panel.
Was this helpful?
Thank you for voting!
The Baking Element won't heat to bake.
1 person found this instruction helpful.
  • Kiara from JACKSONVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
I had the problem before and had to call in a Tech to repair the baking element in my oven. It cost me $150.00 for the repair. This time I decided to do the repair myself, so I went online and found this site The instruction video made it very easy. I am very proud of what I was able to do without calling a Tech. My oven works like new, I t only cost less than $40.00 for the total repair. I am so glad this site were there when I needed them.. Thanks a Lot..
Was this helpful?
Thank you for voting!
No Bake, only Broil
1 person found this instruction helpful.
  • Edward from Adamstown, MD
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
POWER OFF! Unplugged oven from wall.

(Note: I found it easier to disconnect the wires from the element by removing the rear cover. Fumbling around inside the oven was getting me nowhere.)

Removed rear cover.
Disconnected old element.
Unscrewed the old element from inside the oven, removed, and installed t he new element. Screwed the new element in place.
Reconnected wires in back, installed the back cover.
Connected power.
Tested. Good as new.
Was this helpful?
Thank you for voting!
Oven gasket on door was very old. Oven door did not close properly.
1 person found this instruction helpful.
  • Margaret from Clarendon Hills, IL
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Followed a simple video and completed this repair in just 5 minutes, gasket came out easily and the new one went in easily . Cleaning the oven door was the hardest part.
Was this helpful?
Thank you for voting!
The bake oven element burned out
1 person found this instruction helpful.
  • Robert from LEXINGTON, MA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Removed two screws and disconnected the element. Reconnected the new element and reinstalled the screws
Was this helpful?
Thank you for voting!
replace broken bake element
1 person found this instruction helpful.
  • Frances from MOREHEAD, KY
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Unplugged the range. Took our the oven shelves. Unscrewed the bars holding the broken bake element to the back of the oven wall. Gently pulled out the wiring to which the bake element is attached. Slipped the ends of the broken bake element off the ending on the wiring. Then slipped the ends of the new bake element over the ends on the wiring. Then pushed the wiring with attached bake element back into their position behind the oven wall and attached the bars holding the bake element to the back of the oven wall. This is really easy because it is exactly like the on-line video, for I am a 75 year old female with little technical experience.
Was this helpful?
Thank you for voting!
All Instructions for the 3841
91 - 105 of 428