3841 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burner receptacle failed (stove over 30 years old)
1 person
found this instruction helpful.
-
BETH from COUNCE, TN
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Took out burner (pulls out) Took out one screw that holds recep. in, cut the two old wires and attached new wires with wire nuts included in the new package.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person
found this instruction helpful.
-
Donald from Tomahawk, WI
- Really Easy
- 15 - 30 mins
Very simple fix--unpugged two fittings in the back of oven plugged in the new element and it was done.The Best part was that the element burned out on a Sunday and I ordered the part that day and it shipped on Monday and received part on Wed AM.This is the second time I've had to replace the element and by ordering through Part Select I s
... Read more
aved $24.00 versus buying it from an appliance store.
Don Samuelson
Don Samuelson
Read less
Was this helpful?
Thank you for voting!
bake element disintegrated!
1 person
found this instruction helpful.
-
Susan from Grand Ledge, MI
- Really Easy
- 15 - 30 mins
-
Screw drivers
Seems every 5 years this bake element totally disintegrates, so we,re experienced! Pull the stove out and remove the back, remove the 2 screws that hold the element(now in 5 pieces), diconnect and discard. Place new element in and connect, replace the 2 screws holding the element in place. Replace stove back. Easy
Was this helpful?
Thank you for voting!
Lower element out-oven wouldn't heat
1 person
found this instruction helpful.
-
PATSY from HALLWOOD, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
I removed the two screws at the rear of the oven and pulled out the existing element, plugged in the new element, pushing it back in place and mounted the screws back in the bracket. I then made the "Tim the Tool Man" grunt noises feeling very proud that I am now officially a Handy Woman!
Was this helpful?
Thank you for voting!
oven didn't heat up
1 person
found this instruction helpful.
-
robert from merrimack, NH
- Really Easy
- 15 - 30 mins
-
Screw drivers
removed the old element by taking out two screws then removed the two wires. pulled out the old element , put the new one in . connected the wires and screwed it in. Done.
Was this helpful?
Thank you for voting!
Oven wouldn't heat
1 person
found this instruction helpful.
-
Jonathan from Havertown, PA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Easiest repair ever.
#1 - Turn off power (or you will get electricutued).
#2 - Unscrew back of heating elements
#3 - Disconnect wires (may need pliers)
#4 - Attach new heating element
#5 - Put in screws
Everything took 15 mintes max.
#1 - Turn off power (or you will get electricutued).
#2 - Unscrew back of heating elements
#3 - Disconnect wires (may need pliers)
#4 - Attach new heating element
#5 - Put in screws
Everything took 15 mintes max.
Was this helpful?
Thank you for voting!
Fridge light dead even with new bulb
1 person
found this instruction helpful.
-
marj from NEWBURY PARK, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
1- youtubed the potential diagnoses, 2- resourced and ordered parts, 3- removed old socket, installed new one :-)... My fridge is an older fridge and could've used a screwdriver for eyeglasses. Plug and play easy... YAY!
Was this helpful?
Thank you for voting!
Bottom Element Burned out
1 person
found this instruction helpful.
-
Robert from Jacksonville, FL
- Easy
- 15 - 30 mins
-
Screw drivers
Turned off all power to range.
Removed two Philip head screws
Gentle pulled unit Element forward
Removed two push on connectors
(Do not let wires fall back into oven holes)
Reversed the process.
Removed two Philip head screws
Gentle pulled unit Element forward
Removed two push on connectors
(Do not let wires fall back into oven holes)
Reversed the process.
Was this helpful?
Thank you for voting!
replacing old drip bowls
1 person
found this instruction helpful.
-
Marion J. from Palmetto, FL
- Really Easy
- Less than 15 mins
It was so simple & the parts fit perfectly. I appreciated all the help from your sales lady. Thanks again.
Other Parts Used:
Was this helpful?
Thank you for voting!
ELECTRIC BURNER SUPPORT FELL OFF AND BURNER SOMETIMES WOULD NOT COME ON.
1 person
found this instruction helpful.
-
RICHARD from SHOW LOW, AZ
- Very Easy
- Less than 15 mins
Stuck the new one into the plugin.
Was this helpful?
Thank you for voting!
My light in the refrigerator was going on and off.
1 person
found this instruction helpful.
-
Nan from PURCELLVILLE, VA
- Very Easy
- Less than 15 mins
I unplugged the refrigerator. Pressed the tab near the light bulb. Unplugged the socket and reconnected it.
Was this helpful?
Thank you for voting!
Previous element burnt up
1 person
found this instruction helpful.
-
Betsy from Sun City, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
I let my husband to the work...But it was very easy. I could have done it! He removed the screws, pulled the wires off previous element. Reattached the wires to the new element and screwed the ends back in place.
Was this helpful?
Thank you for voting!
Bake Element shorted out
1 person
found this instruction helpful.
-
Laurie from Clarence, NY
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I first shut off the breaker to the stove - safety first!
I used a phillips screw driver to remove the two screws that held the old element in. Then I pulled the old element out and used the pliers to remove the electrical connections. I put the new element in, made the electrical connections and secured it with the screws. ... Read more After restoring powere via the breaker, we tested the stove and it worked. Just call me the Maytag Man!
I used a phillips screw driver to remove the two screws that held the old element in. Then I pulled the old element out and used the pliers to remove the electrical connections. I put the new element in, made the electrical connections and secured it with the screws. ... Read more After restoring powere via the breaker, we tested the stove and it worked. Just call me the Maytag Man!
Read less
Was this helpful?
Thank you for voting!
The element was completely gone.
1 person
found this instruction helpful.
-
Hudson from Cockeysville, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
Turned off power, removed 2 screws, un-hooked the connections, them put in the new element in reverse order.
Was this helpful?
Thank you for voting!
burner would not heat.
1 person
found this instruction helpful.
-
Jackie from Hughes Springs, TX
- Really Easy
- Less than 15 mins
I unpluged the old burner and pluged the new one in. Repair done in about 2 min,
Was this helpful?
Thank you for voting!