EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3644 Kenmore Range - Instructions

All Instructions for the 3644
91 - 105 of 367

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower oven heating unit burnt out
1 person found this instruction helpful.
  • MARTIN from NAPERVILLE, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires,held wires one at a time so tehy wouln't slip back into rear holes in oven, slid off connector tabs and pushed on to replacement unit...)
Was this helpful?
Thank you for voting!
Oven would not get to temperature...200 degrees max
1 person found this instruction helpful.
  • Jan from Rockport, ME
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Pull out oven and unplug from 220 outlet. Remove rear upper/lower cover (4 screws), Remove two wires from rear of element. From front, open oven door, remove two screws and pull out old element.
Install new element by reversing above sequence. Then test and push oven back in place. Easy!
Was this helpful?
Thank you for voting!
bake element was broken
1 person found this instruction helpful.
  • allen from MT. AIRY, MD
  • Easy
  • 15 - 30 mins
  • Nutdriver
i slid the oven out unplugged it !! , removed back cover with a nut driver, removed the two retaining nuts from the old bake element ,opened oven door removed two nuts that hold bake element to the back of the oven , installed new bake element then attached wires in the back of oven to the new element re installed retaining screws inside oven , check to make sure screws that hold power cord wires to the over are TIGHT !! i then installed rear cover then plugged in the oven it worked great !!
Was this helpful?
Thank you for voting!
oven coil caught on fire and broke in half!
2 of 4 people found this instruction helpful.
  • Cynthia from Houston, TX
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
I turned off the main power! Then unscrewed the back cover unhooked the wires and unscrewed the coil inside of the oven and pulled it out. My 10yr old son and I measured it and went online to order the part. I first did go into BestBuy and they didn't have the part (But they tried to sale me a new oven!) LOL Now who said a newly divorc ed mom couldn't fix her own oven! My Tech Support skills came in handy! Women Rock! LOL
Was this helpful?
Thank you for voting!
The phillament ends were pointed straight and the one I removed from the oven were bent in an angle .
1 person found this instruction helpful.
  • Michael from CLAY, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers
Bent the tips so the phillament can fit inside the oven.
Was this helpful?
Thank you for voting!
the oven seal was dried out and crumbling not safe to use on a gas appliance
1 person found this instruction helpful.
  • jim from SAVAGE, MN
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
From what I was able to find info on I was to take out 5 screws 3 on top and 2 on the bottom then the inner oven box is suppose to pull out a bit to take the old gasket off and put the new onw on the box was so rusty it would not pull out so I was able to get enough of the box out using a large screwdriver the lip of the gasket tucks behi nd the box. I ended up using a small screwdriver to work the new gasket behind the oven box. The door now needs new springs the tension on them is not strong enough to pull the door shut the way it should there's still room to push the door into new gasket.
Was this helpful?
Thank you for voting!
The old heating erlement basically melted and broke in two places
1 person found this instruction helpful.
  • Coleen from Danville, IN
  • Easy
  • 15 - 30 mins
  • Screw drivers
I unscrewed the two screws inside the oven, then i pulled the oven away from the wall and unscrewed the protective shield, and undid the wiring. Then i removed the element. Once the new one arrived, i pretty much just did the same thing in reverse. vwa-lah... fixed!
Was this helpful?
Thank you for voting!
Heating element broke
1 person found this instruction helpful.
  • Ronald from Indianapolis, IN
  • Easy
  • 15 - 30 mins
  • Pliers, Socket set
First turn circuit breaker off. Remove two retaining screws, disconnect two connectors at the end of the element, toss old element and reverse the procedure
to install.
Was this helpful?
Thank you for voting!
Oven no longer heated except for Broil element
1 person found this instruction helpful.
  • Derrick from Ypsilanti, MI
  • Easy
  • 15 - 30 mins
  • Socket set
1)Unscrewed old baking element from wall of oven
2)Detached old baking element from wires
3)Attached new baking element to wires
4)Screwed new baking element to wall of oven
5)Turned on oven
Was this helpful?
Thank you for voting!
The bake element was burnt out.
1 person found this instruction helpful.
  • Linda from Fort Collins, CO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
It took a nutdriver to remove two nuts. The defective element was removed and the replacement installed. It works great!
Was this helpful?
Thank you for voting!
Uns rewed and pulled out
1 person found this instruction helpful.
  • Kathy from madison, WI
  • Really Easy
  • 15 - 30 mins
  • Wrench set
At first thought I was taking out some insulation but. "Clamp" just slid off and was very easy to install! Finding the right size socket took longer than the repair!
Was this helpful?
Thank you for voting!
Element burned out.
1 person found this instruction helpful.
  • lynette from Bowling Green, KY
  • Easy
  • 15 - 30 mins
  • Pliers
Flipped off the circuit breaker first. Unscrewed the two screws holding the element in place. Pulled out about 4-5 inches. Tried several times to pull apart the connections, finally got 'em - don't give up (I must have weak fingers). Then plugged in the new element, shoved the wires back in, screwed it back in place, flipped circuit br eaker back on, turned the oven on.... made brownies (o:
Was this helpful?
Thank you for voting!
Surface burner switch malfunction allowing the burner to remain on high heat after turning to low heat.
1 person found this instruction helpful.
  • John from OAKLAND, MD
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed two small screws located on the underside of the control panel. I then rotated the bottom of the control panel up and dislodged the few connections at top back of control panel. The control panel became loose enough to lay forward exposing the inner control switches. The old problem switch wiring was removed one by one and place d in the same spot on the new switch. The old switch was then removed by pulling off the front control knob and then unscrewing two screws holding the old switch in place. Then the new switch was installed exactly as the old switch was removed.
Was this helpful?
Thank you for voting!
Lower Oven Bake Element Burned Out
1 of 2 people found this instruction helpful.
  • Kay from Roswell, GA
  • Easy
  • 15 - 30 mins
  • Socket set
I should note that my first order to PartsSelect.com
was made on-line and that I selected the wrong part by comparing the burned-out element to the web site picture. When I received that part, I phoned and quickly corrected my mistake, ordered the correct part and obtained return instructions.

With the correct part in han d, I removed the two screws holding the element in place, pulled the element out a short distance to disconnect the two wires and removed the burned-out element. Reversing this procedure I installed the new bake element and completed the job by checking out the oven heating. The hardest part of all this was reaching over the oven door and stretching to unscrew and screw the necessary screws.
Was this helpful?
Thank you for voting!
heating element shorting out-sparking
1 of 2 people found this instruction helpful.
  • K from PERRYVILLE, MO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I turned off electric to the stove. In the oven, I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. After unpacking the new element, I placed it in the bottom of the oven, reconnected the two wires, and gently fed the wires back into the back of the oven. I then secured the new unit to the oven wall with the two screws.
Was this helpful?
Thank you for voting!
All Instructions for the 3644
91 - 105 of 367