356- - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light burned out in upper oven
0 of 1 people
found this instruction helpful.
-
Shirley from Las Vegas, NV
- Really Easy
- Less than 15 mins
Screwed in light bulb and glass protector
Was this helpful?
Thank you for voting!
Sockets for the burner elementss were burned out
0 of 1 people
found this instruction helpful.
-
Martin from Manchester, MD
- Really Easy
- 15 - 30 mins
I removed the burner elements for three burners by lifting the surface top and unplugging them. I snapped out the plug sockets that were burned out and cut the two wires, one element at a time. Using the included wire nuts I stripped the ends of the cut wire and connected each wire to one of the wires on the new socket. Once the wires
... Read more
were connected I snapped the sockets in place and reinstalled the elements, lowered the surface top and the range was ready to use.
Read less
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people
found this instruction helpful.
-
William from Schwenksville, PA
- Easy
- Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people
found this instruction helpful.
-
Janet from Ada, MI
- Really Easy
- Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
one of wire melted and broken off from receptacle
0 of 1 people
found this instruction helpful.
-
Young from Cordova, TN
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Cut broken wire and existed wire off and put splice on both new and old wires to connect them.
It's easy job.
It's easy job.
Was this helpful?
Thank you for voting!
Electrical receptacle for burner was defective.
0 of 1 people
found this instruction helpful.
-
gerald from Hillsboro, TN
- Easy
- 1- 2 hours
-
Pliers, Screw drivers, Socket set
After buying a 'universal' part at Lowe's and it not fitting correctly and shorting out the burner, I went online and found this source for an exact replacement part. Beside having to disassemble the drop in stove burner two or three times it went well when I had the correct part. I lost one screw somewhere and that delayed me a short t
... Read more
ime to find a replacement. Thus the 1 to 2 hours. It would have been about a 30 minute job if I had been smarter.
Read less
Was this helpful?
Thank you for voting!
Bulb Replacement
0 of 2 people
found this instruction helpful.
-
Judith from Phoenix, AZ
- Really Easy
- Less than 15 mins
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this helpful?
Thank you for voting!
Old surface element burned out.
0 of 2 people
found this instruction helpful.
-
Royce from Rio Rancho, NM
- Really Easy
- Less than 15 mins
I ordered and received the replacement element, then unplugged the old one and plugged in the new one.
Job done.
Job done.
Was this helpful?
Thank you for voting!
old drip bowl was worn out
-
Richard from Germantown, MD
- Really Easy
- Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
needed a new drip bowl and couldn't find ons that fit exactly but you had it
-
Elsie from Garner, NC
- Really Easy
- Less than 15 mins
I removed the old one and put in the new one. Works great!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
Burner receptacle had malfunctioned and been removed
-
Kerry from Silverado, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
10 Minutes for a stove my landlord thought was not fixable (repairman had already cut the wires to the element and capped them)! The delivery person handed me the package, I got out the single tool needed, installed the part, put away the tool, cleaned my hands, and put a pot of water on the stove to boil for pasta. 10 minutes!
Was this helpful?
Thank you for voting!
Burner no longer connected with electric power source
-
Barbara from Pacific Palisades, CA
- Really Easy
- Less than 15 mins
I had determined that the the burner itself was no longer capable of connecting because when I removed another burner and inserted it, it worked just fine. Also, the defective burner had not worked when inserted into another outlet. I was delighted to be able to purchase a replacement so quickly and easily on my own, without having to cal
... Read more
l a repair person or seek a retail outlet.
Read less
Was this helpful?
Thank you for voting!
one pole of the socket corroded to nothing
-
martien from williamstown, MA
- Easy
- Less than 15 mins
Starting by me making a substitute prong to keep the stove working while the part this coming by mail. was a piece of cake.
Was this helpful?
Thank you for voting!
part of original burner not working
-
SUSAN K from SEDALIA, MO
- Really Easy
- Less than 15 mins
slide new burner in slot and turned on stove. Worked perfectly.
Was this helpful?
Thank you for voting!
Dirty drip bowl
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Remove old drip bowl from the range and put a new one back.
Was this helpful?
Thank you for voting!