EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3524 - Instructions

All Instructions for the 3524
91 - 105 of 257

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Thermostat bulb was hanging loose
2 of 5 people found this instruction helpful.
  • Willi from Old Saybrook, CT
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
Oven wouldn't heat.
1 of 2 people found this instruction helpful.
  • James from Dallas, OR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
My wife detected the problem Wednesday evening before Thanksgiving. We've had the heating element break before, so we knew right away what the problem was. We ordered the part that night, and even though we weren't able to cook Tom for Thanksgiving, the part shipped on Friday and arrived the next Thursday.

First, I turned of f the power to the stove at the circuit breaker.

Then, I removed the two screws that hold the element in place. They are on the top of the flange and partially concealed by the convection element that juts out.

I pulled out the heating element, disconnected the electrical leads, and installed the new one.

I attempted to put the screws back in, but they were a little tough to line up. I decided to leave them out, knowing that I will probably be doing this repair again in a couple of years.

Hopefully, next time it won't be the day before Thanksgiving.
Was this helpful?
Thank you for voting!
Original element burned up.
1 of 2 people found this instruction helpful.
  • Karen from Jensen Beach, FL
  • Easy
  • Less than 15 mins
  • Screw drivers
My husband removed the screws holding the damaged element and removed it before the new one arrived. When we received the replacement part, it took only about 10 minutes for him to repair the oven, inserting the new element.
Was this helpful?
Thank you for voting!
broiler drawer hung crooked on one side.
1 of 2 people found this instruction helpful.
  • Denise from Festus, MO
  • Easy
  • Less than 15 mins
  • Screw drivers
I can't believe how easy this was to fix! I amazingly found the part on-line at PartSelect website. I love that you pick part by size, color, etc. I didn't have a part or model number, so this made it super easy! I ordered the part and got it in the mail within 2 days....YEAH! I got my screwdriver out and attached the peice, slid the drawer back in and shazam! it was fixed! Thank you PartSelect and kudos to the person that set up the way you order your parts......awesome! Thanks!
Was this helpful?
Thank you for voting!
Terminal block arc'ed because a wire had become loose.
1 of 2 people found this instruction helpful.
  • Larry from Scranton, KS
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Ordered and received the terminal block. Installed it along with a new 220V power cord and the appropriate insulator . Ensured the terminals were tight with a nut driver. Reinstalled cover. Then, using the control panel, I did a function check on all the heating elements, clock, oven light, to satisfy all operational requirements. All ch ecked good! And, I was relieved that the control panel had not been shorted out as the terminal block was due to a loose connection. Easy fix.
Was this helpful?
Thank you for voting!
Lower element in stove burnt out.
1 of 3 people found this instruction helpful.
  • Dale from Petersburg, IL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Called repairman, he never called back for a week. Gave up and found your website, ordered the part. You said it would take 3-5 business days. You lied, it was there the next day. Taking old element out starts with shutting off the juice. Remove trays, pans, etc. Unscrew two screws, pull out elements ends, unclip from wires, reverse the process with new one. You need a light to do this.
Was this helpful?
Thank you for voting!
broiler drawer supports broken
1 of 3 people found this instruction helpful.
  • Clarence from Yorktown, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed drawer from track replaced supports on track and one on the drawer.
Was this helpful?
Thank you for voting!
elements busted
2 of 6 people found this instruction helpful.
  • shanon from kyle, TX
  • Really Easy
  • Less than 15 mins
the new elements were super easy to replace. the old ones just pulled out and the new ones easily pushed in. the top one was a little more difficult only because it had brackets that had to be slid of and then slid onto the new one.
Was this helpful?
Thank you for voting!
The broiler drawer support broke while removing the drawer for cleaning. Order part through Part-Select, arrived within 4 days, replaced broken part same day.
1 of 3 people found this instruction helpful.
  • Stanley from Brunswick, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Broken part was already removed, so I used the screw from the broken support and installed the new support. Very simple, easy, and painless.
Was this helpful?
Thank you for voting!
thermostat temprature bulb hanger clips
1 of 4 people found this instruction helpful.
  • Dwayne from Atlanta, GA
  • Really Easy
  • Less than 15 mins
snaped them into oven cavity attached temp bulb job complete
Was this helpful?
Thank you for voting!
no heat
0 of 1 people found this instruction helpful.
  • calvin from summit, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
unscrewed covers . unpluged heating element , pluged in new one , put covers back on. oh yeah unplug stove first.
Was this helpful?
Thank you for voting!
element had burned out
0 of 1 people found this instruction helpful.
  • SARAH from DUNNSVILLE, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
unscrewed the element and pulled it out, then put the new element in.
Was this helpful?
Thank you for voting!
Burned out element
0 of 1 people found this instruction helpful.
  • Arlyn from Bennet, NE
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
simple as1-2-3
Was this helpful?
Thank you for voting!
Heating Element Broke
0 of 1 people found this instruction helpful.
  • Emogene from Indianapolis, IN
  • Really Easy
  • Less than 15 mins
Remove the bottom rack from the oven. Pull the heating element straight back and out of the oven. Inserted the replacement burner in the opposite manner. Part was delivered in a timely manner.
Was this helpful?
Thank you for voting!
The bake element sparked then burned up
0 of 1 people found this instruction helpful.
  • John from Dover, DE
  • Really Easy
  • Less than 15 mins
  • Screw drivers
This is the second time I have replaced the bake element. It looks like 8 years is about as long as they last under normal use. The repair was simple; remove 2 screws, pull the bake element out, disconnect the wire connected to each end of the bake element, then reverse the process to reinstall.
Was this helpful?
Thank you for voting!
All Instructions for the 3524
91 - 105 of 257