EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3524 - Instructions

All Instructions for the 3524
121 - 135 of 257

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Element burned out
0 of 1 people found this instruction helpful.
  • Fran from Bryan, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Called Sears, repairman couldn't come for a week and would cost $129 for visit not including parts. Went to Sears repair store, part cost more than the part I had already found online and would take a week to arrive. Ordered the part online, paid for next day delivery, watched a video on how to replace. Had my oven back in two days and $5 9!!!
Was this helpful?
Thank you for voting!
The oven was not heating.
0 of 1 people found this instruction helpful.
  • Jennifer from Grantsville, UT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
After noticing that our oven was not heating up, we talked to some other people and they said that we should try replacing the heating element. Replacing the heating element was as simple as removing two screws, pulling out the old element, reattaching the new element and putting back the two screws. One mistake I made was not unpluggin g the range before doing this repair and so I got a little electric shock before I was finished. After getting shocked I did unplug the range before continuing with the repair. The best part is that my oven now works again with no problem. This repair couldn't be any easier.
Was this helpful?
Thank you for voting!
Element burned out
0 of 1 people found this instruction helpful.
  • Tom from Crystal, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
1 Turn off power
Was this helpful?
Thank you for voting!
Baking element fried!
0 of 1 people found this instruction helpful.
  • Ed from Quitman, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Not really much of a repair story to tell. While using the oven one evening the baking element began sparking and appeared as someone was using an arc welder inside my oven. I went to the computer and did a search for Magic Chef parts and found the Part Select web site. There I entered the model number of my range which brought up the schematics allowing me to locate the part I needed, the baking element. On that parts page I also found a very short, concise video illustrating "how to" change out the element. I ordered the part and received it rather quickly (a matter of days.) Following the directions on the video I had the baking element swapped out in about the same amount of time as it took in the video. Could not have been any easier.
Was this helpful?
Thank you for voting!
Burnt out oven element
0 of 1 people found this instruction helpful.
  • Jeffrey from Point Roberts, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replaced the element.
Was this helpful?
Thank you for voting!
Oven wouldn't heat due to a burned out bake element
0 of 1 people found this instruction helpful.
  • Douglas from Oceanside, NY
  • Really Easy
  • Less than 15 mins
  • Pliers
This was a snap. It took me longer to find the right part number than it did to make the repair. After securing power to the oven, I removed the racks. I then unscrewed the element supports and pulled the element out slightly to expose the connectors. Using a pliers I removed the connector from each side of the element. At this point, I s hould have placed a piece of electrical tape to prevent the connector leads from slipping back into the body of the oven. Instead, I fished them out with a tweezer, and slid the connectors back onto each side of the element. I then screwed in the elements supports, replaced the oven racks, and restored the power. It literally took less than 10 minutes.
Was this helpful?
Thank you for voting!
Heating element burnt out.
0 of 1 people found this instruction helpful.
  • Christopher from Danville, NH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Super simple. My husband ordered the part. It arrived in 3 days. The old element plugs right into cables on both sides of the back of the oven and are secured to the rear wall with screws. I unscrewed the plates, detached the wires on each side and slid the new ones in place. It was that easy and took me about 10 minutes.
Was this helpful?
Thank you for voting!
element burned up
0 of 1 people found this instruction helpful.
  • beverly from bloomsburg, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I am a 62 year old woman. All I had to do was unscrew the retaining screws on the back of the oven wall, pull the element out and unplug it. When the new one came, I did it in reverse. It took about five minutes. Ps: I did turn the breaker off first....
Was this helpful?
Thank you for voting!
baking element quit heating
0 of 1 people found this instruction helpful.
  • Maryrose from Normal, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
first I took the opportunity to clean the oven really well, Turned off the electricity at the breaker box, Took out the screw on each side and pulled out to view the clips they were attached to, they came off easily, I attached the new ones pushed in to place and reattached the 2 screws. Easiest thing I've ever done and was so cost effect ive to do this instead of replacing the stove. Works great!I can't believe it was shipped so quickly. I will be shopping here in the future!!!
Was this helpful?
Thank you for voting!
Lower element burnt apart
0 of 1 people found this instruction helpful.
  • Terry from Belton, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turn power off, lifted door of swing hinge, remove convection fan plate screws, remove screws on element bracket, remove from recess far enough to unplug connectors, reverse order to assemble.
Was this helpful?
Thank you for voting!
heating element was burned out
0 of 1 people found this instruction helpful.
  • Brandon from Dickinson, ND
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I am really impressed with partselect.com. I ordered the part on a Saturday evening after my oven quit. By Monday evening I had an email showing it shipped and received it on Wednesday. The fit was perfect and the fix was quick.
Was this helpful?
Thank you for voting!
oven not heating
0 of 1 people found this instruction helpful.
  • Diane from Bedford, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws at the back of the oven that hold the element in place (a flashlight is useful for this). I then pulled the element out about 3 inches and disconnected the wire connectors. Connect up the new element and replace the two screws. Dead simple and quick to do and saved us buying a new stove!!!
Was this helpful?
Thank you for voting!
The bake element failed and needed to be replaced.
0 of 1 people found this instruction helpful.
  • Walter from Ruxton, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Two screws out, the old bake element came out easily, was able to disconnect very easily from the clip wiring, then replaced with new. I even was able to replace the oven light bulb at the same time. A real cinch.
Was this helpful?
Thank you for voting!
heating element went out on oven 4 days before Christmas
0 of 1 people found this instruction helpful.
  • Ann from San Marcos, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)
Was this helpful?
Thank you for voting!
Short in the Bake Element
0 of 1 people found this instruction helpful.
  • Paul from Parkston, SD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, at that point I attempted to reconnect the two wires, that is when I found out why they tell you to unplug the electricity. It wasn't a big shock, more of a consistant shock. Once I unpluged the sto ve from the wall, it only took about 3 minutes or so to connect the wires and replace the two screws. I have no doubt I saved a hundred dollars doing this myself.
Thank you for your prompt delivery on the replacement part for my Bake Element at what I felt was a very reasonable price.
Was this helpful?
Thank you for voting!
All Instructions for the 3524
121 - 135 of 257