EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3524 - Instructions

All Instructions for the 3524
76 - 90 of 257

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bottom Element Burned out
1 person found this instruction helpful.
  • Robert from Jacksonville, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Turned off all power to range.
Removed two Philip head screws
Gentle pulled unit Element forward
Removed two push on connectors
(Do not let wires fall back into oven holes)

Reversed the process.
Was this helpful?
Thank you for voting!
oven didn't heat up
1 person found this instruction helpful.
  • robert from merrimack, NH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed the old element by taking out two screws then removed the two wires. pulled out the old element , put the new one in . connected the wires and screwed it in. Done.
Was this helpful?
Thank you for voting!
lens light was broken and missing.
1 person found this instruction helpful.
  • Allan from Rolla, MO
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Removed the cooktop using screwdriver. Pushed lens-light into cooktop hole.It was difficult to do and was where I spent most of my time. Next time I will spray bottom of lens- light with silicon so it goes in easier. I stood cooktop up on its side and inserted the red light assembly onto the lens-light. Reinstalled cooktop < br />and turned electrical power on.
Was this helpful?
Thank you for voting!
Lower burner not heating:
1 person found this instruction helpful.
  • John from Fishers, IN
  • Easy
  • 15 - 30 mins
  • Screw drivers
Ordered element and recieved in two days(yea). Removed back cover from unit. Removed two wire slide on wire clips. Then went inside oven cavity and removed two screws holding element intact. The element slid out. Installed element, re-installed two screws to hold element intact. Attached wire clips back on to element, re-attached back cover. Plugged unit back in and it worked perfectly. Eazy-peezy lemon squeezy.

John
Johnny on the Spot Home Repairs
Fishers, Indiana 317-997-3600
Was this helpful?
Thank you for voting!
selector switch not smooth and no heat on element
1 person found this instruction helpful.
  • TUONG from ALBANY, NY
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
un-plug device from outlet for safety first and then remover all top panel after screws lower two side small screws. actually is not selector problem. It was burner switch problem for 6 inches element.
Was this helpful?
Thank you for voting!
Replace the lower oven element
1 person found this instruction helpful.
  • Tom from ROCKTON, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the 220 cord..remove rear metal back ( 7-8 Ph/screws)... disconnect the red & yellow connectors from the back of the lower element. Remove-the-lift-off Oven door. Remove the two Ph/screws (one on either end of the element) At the very rear of the oven. Install the new element and reverse the about to reassemble.
Was this helpful?
Thank you for voting!
The bake element burst.
1 person found this instruction helpful.
  • Diane from Littleton, CO
  • Easy
  • 30 - 60 mins
  • Screw drivers
Removed the two screws that held the element in place and then pulled off the element from the connectors. Slipped the new connectors on. Tested the oven - Baked some blackberry cobbler!
Was this helpful?
Thank you for voting!
Oven baking coil had burned out
1 person found this instruction helpful.
  • Marie from Fredericksburg, VA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Removed two screws from back of oven ,pulled apart old coil from wires, inserted new coil into the small metal pieces, pushed back and screws replaced. Really easy , anyone can do. Oh, I am 70 years old so probably people younger could do more quickly.
Was this helpful?
Thank you for voting!
element actualy was broken somehow
1 of 2 people found this instruction helpful.
  • allen from st. paul, MN
  • Easy
  • 30 - 60 mins
  • Screw drivers
first I removed the 2 screws, I then pulled the element out., accidently lost one of the wire in the insulation and had to take the back panel off which was 8 screws. Probably doubled my time. I received my part in 4 days thanks to good service and FedX It arrived the day before Thanksgiving. Just in time, Thank You All.
Was this helpful?
Thank you for voting!
Oven quit in the middle of cooking the Christmas turkey. Fortunately we have a smaller oven on the top which finished the job. (a few hours late, but after a few cocktails and more visiting, it really worked out fine!)
1 of 2 people found this instruction helpful.
  • Richard from Topsfield, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I was blown away by how easy it was to order and receive this replacement part. I went on the web on Christmas afternoon, Googled "Magic Chef" and found your website. Your ordering process could not be easier (including the on-line drawings and all). I selected the lowest cost shipping method "3-5 days." Wednesday evening, I got your e-mail with the tracker. Thursday afternoon the part arrived! Saturday, we opened the oven, took out the old unit, and put in the new. It worked fine! Thanks again!!
Was this helpful?
Thank you for voting!
I had a hole burned threw the heating element.
1 of 2 people found this instruction helpful.
  • jeff from clinton, OH
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires.

Rehooked up wires on new element, Slid the element in place. Replaced the two screws. Done, very easy.
Was this helpful?
Thank you for voting!
Oven wouldn't heat
1 of 2 people found this instruction helpful.
  • James from Jasonville, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about three inches and disconnected the two wires, being careful not to pull the plugs off. I then inserted the new element and reattached holders. It was very easy and took less than five minutes. The part arrived amazingly quickly. The stove wor ks great now.
Was this helpful?
Thank you for voting!
Baking element burned out while I was baking
1 of 2 people found this instruction helpful.
  • Hurline from Cedar Park, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I Unscrewed the attachment plates located at the back of the over. Pulled the element out so that I could "unhook" the prongs. Replaced the new element by clipping on the prong attachement (you will see where the electrical wires are). Screwed the plates back on and Vola! I'm baking again.
Was this helpful?
Thank you for voting!
Replacing bake element
1 of 2 people found this instruction helpful.
  • Barry from Bay Village, OH
  • Really Easy
  • Less than 15 mins
  • Pliers, Socket set
Turned off power circuit to oven. Removed old element by unscrewing two nuts attaching unit to back of oven. Used pliers to help release electrical connections at both ends of element. Re-attached connections to new unit. Screwed nuts back into place. Turned power back on and cooked dinner. Total time for repair was less than 5 minutes.
Was this helpful?
Thank you for voting!
One of the broiler drawer support broke
1 of 2 people found this instruction helpful.
  • Jay from Charleston, SC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Piece of cake. Removed the Phillips screw with screwdriver, placed new one on the slide and used old screw to screw it in place. Drawer does not lean to one side anymore.
Was this helpful?
Thank you for voting!
All Instructions for the 3524
76 - 90 of 257