3424 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken freezer door gin
2 of 3 people
found this instruction helpful.
-
Dean from Nevada, IA
- Really Easy
- Less than 15 mins
Hah! It took 1 minute to open the package and 10 seconds to install. The shipping response was incredibly fast. Great Service!
Was this helpful?
Thank you for voting!
Broken meat pan on Kenmore refrig
2 of 3 people
found this instruction helpful.
-
Robert from Los Angeles, CA
- Really Easy
- Less than 15 mins
Just slid it in. Fit perfectly. Called the Help Line just to double check that the pan would fit and they assured me it would. Pan cost $20 less than through the Sears site because of lower price, lower shipping and no taxes. Oh, and the pan came in just two days. Very happy.
Was this helpful?
Thank you for voting!
None fit perfectly
1 person
found this instruction helpful.
-
Michael from CHICOPEE, MA
- Really Easy
- Less than 15 mins
Just slid it down into place.
Was this helpful?
Thank you for voting!
Hook on end of snap-on freezer bin broke.
2 of 4 people
found this instruction helpful.
-
Benton R. from Elkton, VA
- Really Easy
- Less than 15 mins
The existing bin fell off when the hook broke as the freezer door was opened. Finding and ordering the replacement part was about as simple as it can be. Delivery time was less than a week. Replacing the bin was just a matter of snapping it in place, which took all of 5 seconds.
Was this helpful?
Thank you for voting!
The Dairy door was cracked by an item in the refrigerator and broke into two pieces
1 person
found this instruction helpful.
-
George from Pottsville, PA
- Really Easy
- Less than 15 mins
This was not technical at all. The old door fell out and the replacement door snapped right into position. It was simple.
Was this helpful?
Thank you for voting!
bought brand new and kick plate was missing
1 person
found this instruction helpful.
-
Lloyd from HASKELL, NJ
- Very Easy
- Less than 15 mins
just snap it on
Was this helpful?
Thank you for voting!
Evaporator was freezing up and was running non stop
1 person
found this instruction helpful.
-
James from PHILADELPHIA, PA
- Very Easy
- Less than 15 mins
-
Nutdriver
I tested the components in the refrigerator defrost function. I used digital multimeter and checked for continuity. Defrost thermostat must 32 degrees or lower.
Was this helpful?
Thank you for voting!
The glass shelf broke above the 2 drawers on the bottom
1 person
found this instruction helpful.
-
Diana from N LAS VEGAS, NV
- Very Easy
- Less than 15 mins
Just lay the new glass shelf into the groves. The shelf was too big and would not fit properly down into the groves.
Was this helpful?
Thank you for voting!
Coils frozen over. Refrigerator not cooling
1 person
found this instruction helpful.
-
Robert from MONTGOMERY, IL
- Very Easy
- 15 - 30 mins
-
Socket set
I cut wires from bad thermostat and removed it . Stripped wires and crimped connectors on new thermostat and wires from old thermostat. Used heat gun to seal sleeves over connectors. Very helpful video from this site Thanks, you will be my go to parts supplier from now on!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
Freezer worked, refrigerator didn't. Ice build up on coils.
1 person
found this instruction helpful.
-
Salvador from SANTA ANA, CA
- Very Easy
- 15 - 30 mins
-
Nutdriver, Pliers
Unplugged refrigerator. Emptied freezer and removed ice maker and cover, need to unplug fan. Defrosted coils with hot water. Cut wires to thermostat as close to it ad possible to leave extra wire in case of an error. Stripped wire in new thermostat and put in shrink plastic then the wire crimp connector joining both light blue wires maki
... Read more
ng sure wires were in before crimping them. Repeated with other dark blue wire. After used the heat gun to shrink the protective white tubing. The only thing i found not satisfying was tge tubing. It was too wide and too small. When i shrunk it did not cover the whole connector and was loose. I had to use a glue gun to cover both ends of each wire connector. Hope this helps other users.
Read less
Was this helpful?
Thank you for voting!
Refrigerator did not cycle
1 person
found this instruction helpful.
-
JACOB from YOUNGSTOWN, OH
- Really Easy
- 30 - 60 mins
Installation was fairly straight forward. The major complaint is that the problem returned 2 weeks later. I don’t know if I care to re-invest in another switch.
Now what?
Now what?
Was this helpful?
Thank you for voting!
Refrigerator evaporator coil was icing up
1 of 2 people
found this instruction helpful.
-
David from VENICE, FL
- Easy
- 15 - 30 mins
-
Nutdriver
The evaporator coil is behind the freezer. Remove the rack that makes the shelf and remove two 1/4” hex head screws I the back of the freezer to access the coil.
I used a hair dryer to melt the ice off the coil.
The thermostat clips on the refrigeration pipe to the coil. Remove the old thermostat and cut the wires at least a fe ... Read more w inches from the thermostat. Clip the new thermostat on the pipe and strip about a 1/4” of the wire ends. The electrical connectors (provided with the new part) must be crimped to connect the wires.
I used a hair dryer to melt the ice off the coil.
The thermostat clips on the refrigeration pipe to the coil. Remove the old thermostat and cut the wires at least a fe ... Read more w inches from the thermostat. Clip the new thermostat on the pipe and strip about a 1/4” of the wire ends. The electrical connectors (provided with the new part) must be crimped to connect the wires.
Read less
Was this helpful?
Thank you for voting!
Needed a replacement door for the dairy compartment
1 of 2 people
found this instruction helpful.
-
Steven from MARYVILLE, MO
- Very Easy
- Less than 15 mins
It simply snapped into place. No tools required. A very simple repair.
Was this helpful?
Thank you for voting!
our meat drawer handle was broken
1 of 2 people
found this instruction helpful.
-
Nickalas A from CUYAHOGA FLS, OH
- Very Easy
- Less than 15 mins
I just put the new one in with no problem
Was this helpful?
Thank you for voting!
The tab broke off of one side of my freezer shelf.
1 of 2 people
found this instruction helpful.
-
Marsha from SAN ANTONIO, TX
- Really Easy
- Less than 15 mins
Opened the box and slipped the new shelf over the existing brackets.Took approximately 1 minute. The shipping was very fast. Very happy with purchase.
Was this helpful?
Thank you for voting!