Cooling problems or a failure to defrost can point to an issue in the refrigerator defrost system, but they do not confirm this thermostat is the cause. During defrost, the thermostat helps protect the evaporator from overheating. This is an OEM kit. Unplug the refrigerator before installation.
To secure a refrigerator or freezer door handle to the door, this OEM kit includes four #10-16 screws. Each is 0.500 in. long and has a Phillips or square drive. Confirm compatibility with your appliance before buying.
This refrigerator crisper cover glass insert rests in the shelf frame above the crisper drawers, providing a storage surface and covering the produce compartments below. Replacement may be needed if the original glass is cracked, chipped, shattered, or missing. Inspect the supporting frame for damage before fitting new glass, since an une...Read moreven or broken frame may leave the insert unsupported. Confirm the correct dimensions and fit in the appliance parts diagram before ordering, as similar glass inserts can vary in size. This is an OEM part sourced directly from the manufacturer.
This clear plastic dairy door covers the dedicated storage compartment inside the refrigerator door. The hinged lid lifts to provide access to butter, cheese, and other stored items while allowing the contents to remain visible. Cracks, broken hinge points, or a missing cover are reasons to inspect it for replacement. No tools are needed ...Read moreto fit the door into its matching hinge holes. Check those mounting points for damage before installation, and confirm that the replacement opens and closes freely without binding against the surrounding compartment. This is an OEM part sourced directly from the manufacturer.
Meats, snacks, and other refrigerated foods stay organized in this clear plastic pantry drawer. The sliding pan provides contained storage in the fresh food compartment, while transparent sides make the contents easy to see. It slides into the existing drawer supports without tools and can be removed for cleaning. Cracks, broken edges, or...Read more damaged sliding surfaces may cause the drawer to catch or tilt during use. Replacing a damaged or missing pan restores accessible storage and keeps smaller food items together. This is an OEM part sourced directly from the manufacturer.
Maintain the selected cooling level with this refrigerator cold control thermostat. It senses temperature through an attached sensing tube and switches the compressor on or off as needed. Worn contacts or a damaged sensing tube may cause the appliance to run too long, stop cooling, or become too warm or too cold. Replacing a faulty thermo...Read morestat helps restore normal cooling cycles and steady temperatures. Unplug the refrigerator before accessing the controls, and handle the sensing tube carefully to avoid sharp bends or kinks. This is an OEM part sourced directly from the manufacturer.
Help your refrigerator release heat with this condenser fan motor kit. The motor turns the fan blade to move air across the condenser coils and compressor, supporting proper cooling. A worn or failed motor may cause unusual buzzing or rattling, warmer compartment temperatures, or longer running times. Replacing the damaged motor helps res...Read moretore airflow through the machine compartment. Unplug the refrigerator before installation, clear dust and debris from the surrounding area, and secure the wiring away from moving parts. Check that the blade turns freely before replacing the access panel. This is an OEM part sourced directly from the manufacturer.
Secure hinge attachment helps keep a refrigerator or freezer door supported during opening and closing. This hinge mounting screw fastens the hinge bracket to the cabinet framework and features a hex washer head for tightening with a nut driver or socket. Its thread size is 1/4-20, with a length of 5/8 inch. Missing hardware, stripped thr...Read moreeads, or a damaged head may leave the hinge loose. Replacing a damaged screw helps restore a firm connection and stable door support when the cabinet threads remain intact. This is an OEM part sourced directly from the manufacturer.
This lower door hinge bracket supports the refrigerator door and provides a pivot point so it can open and close smoothly. It helps keep the door aligned with the cabinet for proper closure. A bent, cracked, or worn bracket may cause the door to sag, drag, or leave gaps along the door seal. Check the bracket and nearby mounting points for...Read more damage when investigating these problems. Confirm the correct hinge position and fit in the appliance parts diagram before ordering a replacement. This is an OEM part sourced directly from the manufacturer.
This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottle that contains paint and a small brush for easy application. It is a little over 2 inches tall. This is an OEM part that is sourced directl...Read morey from the genuine manufacturer, and is meant to be an exact match to the color of the appliance. If the appliance is not white, please see other colors such as almond or black.
This was the second part I tried. The defrost timer was first, but that did not fix it. To do this I had to remove the ice maker and the back plate of the freezer. Then I defrosted the coil and cut the wires. stripped them back and installed the new thermostat. re-assembled and tested. has been working great ever since.
Was this helpful?
Thank you for voting!
Refrigerator would not run but interior light was on.
184 of 248 peoplefound this instruction helpful.
Bruce from Alton, IL
Really Easy
Less than 15 mins
Pliers, Screw drivers
I unplugged the refrigerator, then opened the door and removed four screws holding the plastic electrical panel to the interior top of the main refrigerator compartment and noticed the cold control was corroded badly, apparently from moisture in the panel. I ordered a new one from partselect.com. When it arrived the next day, I then pul
... Read moreled off the control knob, unclipped the cold control, unplugged the three wires to the control, then removed the styrofoam insulation blocks holding the thermocouple wire and then removed the thermocouple wire to complete the removal. I then reversed the process to install the new thermostat and control. That is repositioned the thermocouple wire, put the insulation blocks back to hold the wire, then replugged the three electrical wires, clipped the control back and pushed the control knob back on and finally screwed the panel back to the top of the main compartment and plugged the refrigerator electrical cord back in to provide current to the refrigerator. It immediately started up and ran fine. Total time - about 8 minutes.
Read less
Was this helpful?
Thank you for voting!
refrigerator would'nt cool
22 of 31 peoplefound this instruction helpful.
arthur from doral, FL
Really Easy
Less than 15 mins
Nutdriver
first i removed the four screws that hold the shelve in place disconnected the wire replace both diffuser-air,reconnected the wire and replaced the screws