EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3424 - Instructions

All Instructions for the 3424
16 - 30 of 95

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Glass Shelf in Refridgerator
4 of 4 people found this instruction helpful.
  • Cynthia from Hawley, PA
  • Really Easy
  • Less than 15 mins
I broke the glass shelf in my refrigerator. I had trouble navigating the website, so I called the customer service line, and the lady was lovely to speak with, and ordered my part quickly! In 2 days I had the part, and it fit perfectly!

Great service, great price!
Thank you!
Was this helpful?
Thank you for voting!
Freezer was not defrosting
4 of 4 people found this instruction helpful.
  • David from N KINGSTOWN, RI
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers
Turned off fridge circuit breaker
Removed all food from freezer and put in cooler.
Removed shelves from freezer
Removed ice maker
Removed 2 hex head screws
Tilted back evaporator cover and tried to unplug connection.
Found connection was iced over with a huge block of ice coming from water inlet to ice maker< br />Spent several hours trying to melt and chip away ice without damaging fridge.
Finally was able to break up ice with long flat head screwdriver and hammer.
Unplugged connector and was able to remove evaporator cover.
Cut wires near thermostat and removed
Stripped wire as needed and crimped new thermostat in place.
Used heat gun and lighter to melt heat shrink. This took a long time and required a lot more heat than expected.
Reconnected evaporator cover connection and reattached cover.
Reinstalled ice maker
Reinstalled shelves.
Put food back in
Turned circuit breaker back on.
Was this helpful?
Thank you for voting!
Refrigerator and freezer running to warm.
3 of 3 people found this instruction helpful.
  • Nathan from WELLS, ME
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers
I watched the video on how to change the defrost thermostat. I removed the back cover inside the freezer then I pulled off the old defrost thermostat and then using a pair of wire cutters I cut it off and then bared a little of both of the wires and then slid the heat sherink and wire connectors on the existing wires and then slid the ot her ends of the wires into the wire connectors then crimped the ends of the connectors and then tried using heat on the heat shrinks but still used rubber electric tape over it. I clipped the new thermostat were the old one was and then reattached the freezer wall cover and plugged the refrigerator back in. 24 hours later I checked the temperature in the refrigerator and freezer and both are running a lot colder.
Was this helpful?
Thank you for voting!
Top cools bottom is weak
3 of 3 people found this instruction helpful.
  • JUSTIN from NEW BRAUNFELS, TX
  • Very Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
Unplug, remove 2 screws off back panel inside the freezer. Cut wires on old one and crimped in new one. Light to melt the shrink wrap that came with it. Pretty easy.
Was this helpful?
Thank you for voting!
i smell very bad smell coming from refrigerator
7 of 16 people found this instruction helpful.
  • Arsen from Glendale, CA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I started look inside ,disconnected power, and open all possible compartments to see any burned part. Fortunately I fined a small part look like melted and then i went online and make my research .Then i ordered that part and change it.
Was this helpful?
Thank you for voting!
The Refrigerator was not cooling properly. At 40-45 degrees milk spoiled
2 of 2 people found this instruction helpful.
  • Marcos from E STROUDSBURG, PA
  • Really Easy
  • 15 - 30 mins
  • Socket set
My upper and bottom air diffuser was missing.
Purchased both air diffuser and placed it.
Was this helpful?
Thank you for voting!
the freezer frosted up and the fridge was not getting cold.
2 of 2 people found this instruction helpful.
  • Sherry from Newberry, SC
  • Easy
  • 30 - 60 mins
  • Nutdriver
I watched the instructional video and did what it said.
Was this helpful?
Thank you for voting!
Gasket was oversize and compression spline would not stay in door groove
2 of 2 people found this instruction helpful.
  • CECIL from PHOENIXVILLE, PA
  • Difficult
  • 1- 2 hours
Required a trip to the hardware store. Online research showed that Gorilla Glue would hold gasket in place and was recommended for that task. Needed to glue each side separately to keep the spline in the groove. Took far longer than it should have!
Was this helpful?
Thank you for voting!
Condenser motor burned out
2 of 2 people found this instruction helpful.
  • Bill from STERLING, VA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Socket set
I followed the instructions on your website, made it a simple as possible. Very tight work area sometimes fingers only, but a little patience works.
Saved at least $300. By not paying a repair person.
Was this helpful?
Thank you for voting!
freezer cold and frosting up but refrigerator warm
2 of 2 people found this instruction helpful.
  • Gary from SABINSVILLE, PA
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
inside the freezer compartment, remove four hex head screws from rear panel,lift panel forward and unplug wire assembly from panel. find old defrost thermostat attached to copper tube by clip on back of thermostat, unclip, snip two wires to thermostat, take new thermostat, strip 1/4"of wire from wires in freezer (thermostat is prestripped ),insert light blue wire from thermostat and light blue wire from freezer into opposite ends of crimp connector and crimp securely. repeat with dark blue wires. set panel back in freezer,connect plug to back of panel, refasten screws and you are go to go! save yourself the price of a new refrigerator or $300 repair by repairman!
Was this helpful?
Thank you for voting!
Freezer froze up/ Fridge ran warm
2 of 2 people found this instruction helpful.
  • will from bushnell, IL
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Thawed out freezer, I recommend laying a couple old towels in freezer to soak up melted ice. Replaced old thermostat with new part. Removed 2 screws, removed back plate, unplugged 2 connectors and cut 2 wires. Crimped in new thermostat and repositioned to original part location. Reconnected plugs as I reinstalled back plate. Installed 2 s crews and connected power. Works like new! Trouble shooting and part installation video is very helpful, great site!
Was this helpful?
Thank you for voting!
Broken Glass
3 of 5 people found this instruction helpful.
  • Howard from Sharpsburg, SC
  • Really Easy
  • Less than 15 mins
Order parts on sat.afternoon,and got part on Tues.aand installed in less them 2 min.
Was this helpful?
Thank you for voting!
Fan was off kilter and began rubbing the frame which is caused it to slow down and make an disturbing audible noise.
2 of 2 people found this instruction helpful.
  • Martin from N HOLLYWOOD, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Before buying the part, I watched your video and realized it was extremely simple to remove and replace. Item was to take 7-10 days and I received it in 4. Took longer than 15 minutes because I had to move the fridge forward, get my tools and a vacuum, get a cup of coffee and get to it. Very easy and the video was exactly step by step. It took longer to vacuum all of the dust bunnies than to replace the part.

Honestly, I was in the market to buy a new refrigerator but now I believe I'll wait several more years. Thank you for your support.
Was this helpful?
Thank you for voting!
You have sent the wrong part for the THIRD time. You have sent aaccess cover that is TWO INCHES too short. It does not cover the opening, and you will not answer your phones.
2 of 3 people found this instruction helpful.
  • Jane from EAST JORDAN, MI
  • Very Difficult
  • More than 2 hours
  • Nutdriver
There is no way to complete the repair with the wrong part, You have had my order since June 22nd, 2020 and the incorrect part arrived October 27th, 2020. You charged $7.79 plus $1.06 tax and $9.95 shipping. Please refund the entire amount including the shipping, since I did not ask you to ship the incorrect amount.
Was this helpful?
Thank you for voting!
Wife didn't like the upper freezer door bin.
2 of 3 people found this instruction helpful.
  • Donald from Jonesboro, GA
  • Really Easy
  • Less than 15 mins
Replaced it with one like the lower freezer door bin. Very easy, just snapped into place.
Was this helpful?
Thank you for voting!
All Instructions for the 3424
16 - 30 of 95